Join Telegram Study Group ▷
I bought SPOTO's DC dumps in March as the start of my first CCIE exam. Previously, my network technology foundation was mainly familiar with the CCNP level of routing and switching. I was interested in the new technology in the direction of the CCIE data center. I have heard some technical reports and simply understand the structure of some nexus 1000v. So it can be said that for the large chunks of content (data center network, storage network, unified computing) involved in CCIE Data Center, it is almost a starting point.
Last June, I started the study of CCIE DC dumps which were offered SPOTO. During this time, I mainly did two things:
First, I read the DC classroom teaching videos of the teachers. Second, completed the written test of DC. After this experience, I have a preliminary understanding of the content of UCS and the content of Nexus. I am interested in the Service profile, stateless computing, FEX, FabricPath, vPC, OTV, etc., and also look for Cisco official PPT and PDF. To add something you want to see.
However, due to the limitations of their own foundation, the two parts of the storage and storage network are still poorly understood.
In the next five months, due to the workplace, you can consult SPOTO and watch the video. I will find some video materials to update and supplement, and click the Lab location in Tokyo. In addition to the video lessons of SPOTO, I think the main resources for DC learning are:
1.A report video about DC in the SPOTO.
2.2. Lab exercises on the SPOTO and all labs are available.
3. SPOTO’s DC training video.
4. The experimental exercises on the SPOTO are very valuable. I suggest you pay more attention to it. There are also experiments on the storage network.
But now SPOTO's course video students can already copy it back to learn, I believe this should be more convenient.
From the end of December last year, I applied to enter the version room until the beginning of March of this year. I took the Lab test for about three months (there was a Spring Festival holiday in the middle), which was divided into three stages.
The first stage is mainly the process of familiarizing with the version content and version exercises. I read the version video again (it is definitely not enough for one time, but my time is limited), and then the teacher of SPOTO deliberately arranged a local when I arranged my experiment time. The comrades in front of me, this allows me to observe how to use the laboratory environment;
The second stage is naturally the version practice. In this stage, I knocked on more than ten experiments in total, and the first three or four times can only be half-finished due to unfamiliarity. During this time, you need to figure out the principle of the video and master the method of viewing the system status. What I like most is the error. On the one hand, it helps me to deepen my understanding of the principle. On the other hand, I also accumulate the experience of troubleshooting. So if I can submit the assignment as soon as possible, it is better for the teacher to help me. In fact, this is also the case. Because of the weak foundation, I have made a lot of low-level mistakes in my practice. I have made rapid progress while correcting mistakes. During the practice, you can talk to the teachers more often if you encounter problems. Even if you are not a friend in Beijing, it is very convenient to discuss the problem on the IP phone. It is also important to emphasize that it is best to read and understand the requirements carefully. Only by associating the requirements with the solutions can we better understand the correctness and rationality of the solution.
The third stage is the sprint phase. There are about three Lab exercises in this stage. In addition to the goal of maturity, this time is more concerned with the troubleshooting points that may be faced. On the one hand, according to the past test situation, do some targeted exercises; on the other hand, after each part is configured, I will take a moment to review, this part may face the problem of troubleshooting, and the corresponding response Method. Teachers will do separate coaching before the exam to help you review each part and remind you of the problems you need to pay attention to. This tutoring is more like a pre-test. After the end, you will feel that you have considerable confidence.
As long as the spot test is done according to the guidelines, there will be no big surprises before the preparations are made, especially in the Beijing test room. I spent the last three hours completing the entire Lab and then checked over and over again. I went through three rounds and found two trouble points. It would be a logical thing to pass the first half hour.
Looking back at the process from scratch to passing the Lab exam, I feel that the biggest points of help for me are SPOTO's real exam dumps and the instruction of man teachers. Passing the exam is just a starting point, there are still many things to learn in the future! I wish you all the best!
