DON'T WANT TO MISS A THING?

Certification Exam Passing Tips

Latest exam news and discount info

Curated and up-to-date by our experts

Yes, send me the newsletter

Prepare Efficiently Juniper JN0-648 Exam Questions, Juniper JNCIP-ENT Certification | SPOTO

Unlock your potential with our high-quality practice tests and mock exams for the Juniper JNCIP-ENT certification. Our comprehensive exam materials, including free test questions, exam practice, online exam questions, sample questions, and exam dumps with detailed answers, provide an immersive learning experience. Master advanced routing technologies, Junos OS configuration for enterprise routing and switching platforms, and troubleshooting skills through our meticulously crafted exam questions and answers. Designed by industry experts, our practice tests simulate the real certification exam environment, ensuring you're fully prepared to confidently demonstrate your proficiency. Invest in your career growth and give yourself the best chance at success with our proven JNCIP-ENT exam preparation resources.
Take other online exams
Question #1
You are implementing 802.1X authentication in your Layer 2 network. Each user will have a computer and a phone. The phones are not able to use an 802.1X supplicant, but traffic must be accepted once the user has authenticated their computer on the port. In this scenario, which supplicant mode should be used?
A. captive-portal
B. single
C. multiple
D. single-secure
View answer
Correct Answer: B
Question #2
You are currently using VLAN IDs 2 through 300 within your Layer 2 domain and you need to configure VSTP to prevent loops. You must ensure that all VLANs are loop free. In this scenario, which statement is correct?
A. You must ensure that the VLANs are balanced between two different root bridges
B. You must enable RSTP to account for all VLANs
C. You must ensure that the bridge priority is set to the lowest value on all switches in the Layer 2 domain
D. You must enable all VLANs, 2 through 300, under the VSTP configuration
View answer
Correct Answer: A
Question #3
Click the Exhibit button. A router is attempting to form an OSPF neighborship with another router. However, the OSPF neighborship fails to establish completely. Referring to the exhibit, what is the problem?
A. There is an interface type mismatch
B. There is an interface subnet mask mismatch
C. There is an OSPF area mismatch
D. There is an interface MTU mismatch
View answer
Correct Answer: A
Question #4
You have an MX960 configured as a Fusion aggregation device (AD) and two QFX5100 switches as satellite devices (SD). You have configured local-switching for each SD. A packet with an unknown MAC address is received on one of the SD extended ports. Which statement is correct in this scenario?
A. The packet is dropped and a reject message is sent out to the port where it was received
B. The packet is silently discarded and a reject message is sent to the AD
C. The packet is flooded out of all the ports on the SD except the one where it was received
D. The packet is sent to the AD to be processed and forwarded
View answer
Correct Answer: C
Question #5
Click the Exhibit button. The policy shown in the exhibit is applied as an export policy to your BGP neighborship. Which action will be taken for route 12.233.45.5?
A. It will rejected by term 2
B. It will be accepted by term 1
C. It will be accepted by the default policy
D. It will be evaluated by the next policy
View answer
Correct Answer: D
Question #6
You have configured CoS on a Junos device. A packet is classified as best effort by a behavior aggregate (BA) classifier, and as expedited forwarding by a multifield (MF) classifier. Which statement is true in this scenario?
A. The packet will be placed in a queue associated with the BA classifier
B. The packet will be placed into the queue which is least congested
C. The packet will be placed into the queue that has the most bandwidth assigned to it
D. The packet will be placed in a queue associated with the MF classifier
View answer
Correct Answer: BCD
Question #7
You are using 802.1X in your access network consisting of EX Series switches. You recently had a failure with your RADIUS server which resulted in authenticating client devices being denied access to the network. You want to change this behavior so that authenticating clients are directed to a remediation VLAN. Which RADIUS server failback setting satisfies this requirement?
A. permit
B. move
C. sustain
D. deny
View answer
Correct Answer: AB
Question #8
Click the Exhibit button. You recently implemented the configuration shown in the exhibit. After committing these changes, the community devices connected to AS-1 are not able to communicate with the appropriate community devices connected to AS-2. What must be done to allow these community devices to communicate?
A. You must configure an isolation VLAN ID under the vlan-pri VLAN on the AS-2 switch
B. You must configure the ge-0/0/10 interface on AS-1 as the inter-switch link
C. You must configure the ge-0/0/1 interface on both switches as the inter-switch links
D. You must configure an isolation VLAN ID under the vlan-pri VLAN on both switches
View answer
Correct Answer: A
Question #9
Click the Exhibit button. There is a functioning OSPFv3 neighborship between Router-1 and Router-2 over the ge-0/0/1 link. However, the 172.100.100.0/24 and 172.101.101.100/24 routes are not being shared through OSPFv3. Referring to the configuration shown in the exhibit, which two actions must you take to solve the problem? (Choose two.)
A. Add interface ge-0/0/1 under the IPv4 unicast realm for both routers
B. Add the IPv6 family protocol under ge-0/0/2 for both routers
C. Add the lo0 interface under OSPFv3 for both routers
D. Add interface ge-0/0/2 under OSPFv3 for both routers
View answer
Correct Answer: D
Question #10
Click the Exhibit button. Referring to the exhibit, which TTL value will be sent to the LLDP neighbors?
A. 120 seconds
B. 400 secondsC
D. 200 seconds
View answer
Correct Answer: B
Question #11
When configuring class of service, what would you use to allocate bandwidth to a forwarding class?
A. buffer depth
B. transmit rate
C. bandwidth
D. speed
View answer
Correct Answer: B
Question #12
What are two supported PoE management modes? (Choose two.)
A. class
B. standalone
C. static
D. mixed
View answer
Correct Answer: A
Question #13
You notice a mass withdrawal of routes for some of the network hosts. You determine that the link on the ESI interface is down. Which route type is used in this scenario?
A. Type 2
B. Type 3
C. Type 1
D. Type 5
View answer
Correct Answer: AC
Question #14
Click the Exhibit button. You have a workstation and a VoIP phone connected to port ge-0/0/1 on an access switch. Referring to the exhibit, which two statements are true? (Choose two.)
A. Frames that exit interface ge-0/0/1 on the data VLAN will be tagged
B. The phone will automatically be assigned a VLAN ID
C. Voice frames that enter interface ge-0/0/1 will be forwarded as expedited forwarding traffic
D. All frames that exit interface ge-0/0/1 will belong to the data VLAN
View answer
Correct Answer: D
Question #15
Click the Exhibit button. Referring to the exhibit, how is R5 able to learn the networks that exist within the NSSA?
A. R5 learns those networks from Type 3 LSAs advertised by R2
B. R5 learns those networks from Type 3 LSAs advertised by R3
C. R5 does not learn those networks and uses a default route advertised by R3 instead
D. R5 does not learn those networks but uses a default route advertised by R2 instead
View answer
Correct Answer: C
Question #16
What is the correct authentication processing order on EX Series switches when multiple Layer 2 authentication methods are enabled?
A. MAC RADIUS –> 802
B. 802
C. 802
View answer
Correct Answer: B
Question #17
Click the Exhibit button. Referring to the exhibit, which two statements are true? (Choose two.)
A. There can be more than one OSPF neighbor on the ge-0/0/1 interface
B. There can be more than one OSPF neighbor on the ge-0/0/0 interface
C. There is no need for a DR for the ge-0/0/0 interface
D. The DR election process is not finished for the ge-0/0/0 interface
View answer
Correct Answer: AB
Question #18
Click the Exhibit button. Referring to the exhibit, which two statements are true with regards to deploying CoS? (Choose two.)
A. You should apply MF classifiers on the LAN-facing interfaces of the routers
B. You should apply MF classifiers on the point-to-point interfaces of the routers
C. You should apply BA classifiers on the point-to-point interfaces of the routers
D. You should apply BA classifiers on the LAN-facing interfaces of the routers
View answer
Correct Answer: AB
Question #19
You have PIM SM multicast configured and running in a network environment comprised of EX4300 devices. Your customers report increased delay when switching channels using IPTV. To help decrease the delay, you implement PIM join load balancing. You add the set protocols pim join-load-balance command to the configuration. After committing, you notice that the flows are still using only one path. In this scenario, which statement is correct?
A. The clear pim join-distribution command must be issued
B. The interfaces must be specified to use for load balancing
C. IGMP snooping must also be configured
D. PIM join load-balancing only works for PIM-DM
View answer
Correct Answer: A
Question #20
Click the Exhibit button. Referring to the exhibit, you must advertise the 100.0.0.0/16 routes from AS1 to AS2, but R2 is not advertising any BGP routes to R5. Why is this happening in this scenario?
A. The IBGP routes will not be advertised because you must use a policy to advertise IBGP routes
B. The IBGP routes are not active and EBGP will advertise only active routes
C. The IBGP routes will not be advertised because the AS path shows as incomplete
D. The IBGP routes are not active because the next hop is not reachable
View answer
Correct Answer: C

View Answers after Submission

Please submit your email and WhatsApp to get the answers of questions.

Note: Please make sure your email ID and Whatsapp are valid so that you can get the correct exam results.

Email:
Whatsapp/phone number:


Copyright © 2024. Designer by SPOTO Official Website. All Rights Reserved.