DON'T WANT TO MISS A THING?

Certification Exam Passing Tips

Latest exam news and discount info

Curated and up-to-date by our experts

Yes, send me the newsletter

Prepare Efficiently Juniper JN0-635 Exam Questions, Juniper JNCIP-SEC Certification | SPOTO

Unlock your potential with our high-quality practice tests and mock exams for the Juniper JNCIP-SEC certification. Our comprehensive exam materials, including free test questions, exam practice, online exam questions, sample questions, and exam dumps with detailed answers, provide an immersive learning experience. Master advanced security technologies, Junos OS configuration for SRX Series devices, and troubleshooting skills through our meticulously crafted exam questions and answers. Designed by industry experts, our practice tests simulate the real certification exam environment, ensuring you're fully prepared to confidently demonstrate your proficiency. Invest in your career growth and give yourself the best chance at success with our proven JNCIP-SEC exam preparation resources.
Take other online exams
Question #1
Click the Exhibit button. Your company has purchased a competitor and now must connect the new network to the existing one. The competitor’s gateway device is receiving its ISP address using DHCP. Communication between the two sites must be secured; however, obtaining a static public IP address for the new site gateway is not an option at this time. The company has several requirements for this solution: A site-to-site IPsec VPN must be used to secure traffic between the two sites; The IKE identity on the n
A. Remove the quotes around the hostname
B. Bind interface st0 to the gateway
C. Change the IKE policy mode to aggressive
D. Apply a static address to ge-0/0/2
View answer
Correct Answer: D

View The Updated JN0-635 Exam Questions

SPOTO Provides 100% Real JN0-635 Exam Questions for You to Pass Your JN0-635 Exam!

Get JN0-635 Practice Test
Question #2
You have a remote access VPN where the remote users are using the NCP client. The remote users can access the internal corporate resources as intended; however, traffic that is destined to all other Internet sites is going through the remote access VPN. You want to ensure that only traffic that is destined to the internal corporate resources use the remote access VPN. Which two actions should you take to accomplish this task? (Choose two.)
A. Enable the split tunneling feature within the VPN configuration on the SRX Series device
B. Enable IKEv2 within the VPN configuration on the SRX Series device
C. Configure the necessary traffic selectors within the VPN configuration on the SRX Series deviceD
View answer
Correct Answer: AD
Question #3
Click the Exhibit button. You have two hosts on the same subnet connecting to an SRX340 on interfaces ge-0/0/4 and ge-0/0/5. However, the two hosts cannot communicate with each other. Referring to the exhibit, what are two actions that would solve this problem? (Choose two.)
A. Set the SRX340 to Ethernet switching mode and reboot
B. Add an IRB interface to the VLAN
C. Put the ge-0/0/4 and ge-0/0/5 interfaces in different VLANs
D. Remove the ge-0/0/4 and ge-0/0/5 interfaces from the L2 security zone
View answer
Correct Answer: A
Question #4
Click the Exhibit button. Referring to the exhibit, you are attempting to enable IPsec power mode to improve IPsec VPN performance. However, you are unable to use IPsec power mode. What is the problem?
A. IPsec power mode cannot be used with IPsec performance acceleration
B. IPsec power mode cannot be used with high IPsec maximum segment size values
C. IPsec power mode cannot be used with advanced services
D. IPsec power mode requires that you configure a policy-based VPN
View answer
Correct Answer: BD
Question #5
Click the Exhibit button. Referring to the exhibit, which statement is true?
A. Source NAT with PAT is occurring
B. Destination NAT is occurring
C. Static NAT without PAT is occurring
D. Source NAT without PAT is occurring
View answer
Correct Answer: CD
Question #6
Click the Exhibit button. Referring to the exhibit, which IPS deployment mode is running on the SRX5800 device?
A. sniffer mode
B. integrated mode
C. monitor mode
D. in-line tap mode
View answer
Correct Answer: AC
Question #7
Click the Exhibit button. Referring to the exhibit, what is the maximum number of zones that are able to be created within all logical systems?
A. 74
B. 34
C. 40
D. 17 Cor rect Ans wer: C Section: (none) Explanation Explanation/Reference: Click the Exhibit button
A. TCP
B. LLDP
C. ARP
D. ICMP
E. UDP
View answer
Correct Answer: A
Question #8
Click the Exhibit button. You have configured tenant systems on your SRX Series device. Referring to the exhibit, which two actions should you take to facilitate inter-TSYS communication? (Choose two.)
A. Place the logical tunnel interfaces in a virtual router routing instance in the interconnect switch
B. Place the logical tunnel interfaces in a VPLS routing instance in the interconnect switch
C. Connect each TSYS with the interconnect switch by configuring INET configured logical tunnel interfaces in the interconnect switch
D. Connect each TSYS with the interconnect switch by configuring Ethernet VPLS configured logical tunnel interfaces in the interconnect switch
View answer
Correct Answer: A
Question #9
Click the Exhibit button. A host is unable to communicate with a webserver. Referring to the exhibit, which statement is correct?
A. The webserver is not listening for traffic on port 80
B. A policy is denying the traffic between these two hosts
C. A session is created for this flow
D. The session table is running out of resources
View answer
Correct Answer: D
Question #10
Click the Exhibit button. Referring to the exhibit, which two statements are true? (Choose two.)
A. You can secure intra-VLAN traffic with a security policy on this device
B. You can secure inter-VLAN traffic with a security policy on this device
C. The device can pass Layer 2 and Layer 3 traffic at the same time
D. The device cannot pass Layer 2 and Layer 3 traffic at the same time
View answer
Correct Answer: D
Question #11
Click the Exhibit button. Which statement is correct regarding the information show in the exhibit?
A. The tunnel binding was discovered automatically
B. The output is for an ADVPN
C. The tunnel gateway address was automatically discovered
D. The tunnel is not encrypting the traffic
View answer
Correct Answer: C
Question #12
Click the Exhibit button. Given the command output shown in the exhibit, which two statements are true? (Choose two.)
A. The host 172
B. Traffic matching this session has been received since the session was established
C. The host 10
D. Network Address Translation is applied to this session
View answer
Correct Answer: C
Question #13
You have downloaded and initiated the installation of the application package for the JATP Appliance on an SRX1500. You must confirm that the installation of the application package has completed successfully. In this scenario, which command would you use to accomplish this task?
A. show services application-identification version
B. show services application-identification application detail
C. show services application-identification application version
D. show services application-identification status
View answer
Correct Answer: A
Question #14
Which two statements are true about ADVPN members? (Choose two.)
A. ADVPN members are authenticated using pre-shared keys
B. ADVPN members are authenticated using certificates
C. ADVPN members can use IKEv2
D. ADVPN members can use IKEv1
View answer
Correct Answer: B
Question #15
Click the Exhibit button. Branch 1 and Branch 2 have an active VPN tunnel configured, but internal hosts cannot communicate with each other. Referring to the exhibit, which type of configuration should be applied to solve the problem?
A. Configure destination NAT on both Branch 1 and Branch 2
B. Configure source NAT on Branch 1
C. Configure destination NAT on Branch 2 only
D. Configure static NAT on both Branch 1 and Branch 2
View answer
Correct Answer: A
Question #16
Click the Exhibit button. You deployed a site-to-site IPsec VPN connecting two data centers together using SRX5800s. After examining the performance of the IPsec VPN, you decide to enable IPsec performance acceleration to increase the rate of traffic that can be sent through the tunnel. Referring to the exhibit, which two statements should you add to the configuration to accomplish this task? (Choose two.)
A. [edit security flow] user@srx# set tcp-mss ipsec-vpn mss 65535
B. [edit security flow] user@srx# set ipsec- performance-acceleration
C. [edit security flow] user@srx# set power-mode-ipsec
D. [edit security flow] user@srx# set load-distribution session-affinity ipsec
View answer
Correct Answer: BC

View The Updated Juniper Exam Questions

SPOTO Provides 100% Real Juniper Exam Questions for You to Pass Your Juniper Exam!

Get Juniper Practice Test

View Answers after Submission

Please submit your email and WhatsApp to get the answers of questions.

Note: Please make sure your email ID and Whatsapp are valid so that you can get the correct exam results.

Email:
Whatsapp/phone number:


Copyright © 2024. Designer by SPOTO Official Website. All Rights Reserved.