Pass Your DOP-C02 Exam with Practice Tests 2024 Updated, AWS Certified DevOps Engineer - Professional

Question #1

A company uses an organization in AWS Organizations that has all features enabled. The company uses AWS Backup in a primary account and uses an AWS Key Management Service (AWS KMS) key to encrypt the backups. The company needs to automate a cross-account backup of the resources that AWS Backup backs up in the primary account. The company configures cross- account backup in the Organizations management account. The company creates a new AWS account in the organization and configures an AWS Backup backup vaul

A. Edit the backup vault access policy in the new account to allow access to the primary account

B. Edit the backup vault access policy in the primary account to allow access to the new account

C. Edit the backup vault access policy in the primary account to allow access to the KMS key in the new account

D. Edit the key policy of the KMS key in the primary account to share the key with the new account

E. Edit the key policy of the KMS key in the new account to share the key with the primary account

View answer

Correct Answer: C

Question #2

A company has multiple development groups working in a single shared AWS account. The Senior Manager of the groups wants to be alerted via a third-party API call when the creation of resources approaches the service limits for the account. Which solution will accomplish this with the LEAST amount of development effort?

A. Create an Amazon CloudWatch Event rule that runs periodically and targets an AWS Lambda functio

B. Within the Lambda function, evaluate the current state of the AWS environment and compare deployed resource values to resource limits on the accoun

C. Notify the Senior Manager if the account is approaching a service limit

D. Deploy an AWS Lambda function that refreshes AWS Trusted Advisor checks, and configure an Amazon CloudWatch Events rule to run the Lambda function periodicall

E. Create another CloudWatch Events rule with an event pattern matching Trusted Advisor events and a target Lambda functio

F. In the target Lambda function, notify the Senior Manager

View answer

Correct Answer: C

Question #3

A company has an application that runs on AWS Lambda and sends logs to Amazon CloudWatch Logs. An Amazon Kinesis data stream is subscribed to the log groups in CloudWatch Logs. A single consumer Lambda function processes the logs from the data stream and stores the logs in an Amazon S3 bucket. The company's DevOps team has noticed high latency during the processing and ingestion of some logs. Which combination of steps will reduce the latency? (Select THREE.)

A. Create a data stream consumer with enhanced fan-ou

B. Set the Lambda function that processes the logs as the consumer

C. Increase the ParallelizationFactor setting in the Lambda event source mapping

D. Configure reserved concurrency for the Lambda function that processes the logs

E. Increase the batch size in the Kinesis data stream

F. Turn off the ReportBatchltemFailures setting in the Lambda event source mapping

View answer

Correct Answer: ABC

Question #4

A company requires its internal business teams to launch resources through pre-approved AWS CloudFormation templates only. The security team requires automated monitoring when resources drift from their expected state. Which strategy should be used to meet these requirements?

A. Allow users to deploy CloudFormation stacks using a CloudFormation service role onl

B. Use CloudFormation drift detection to detect when resources have drifted from their expected state

C. Allow users to deploy CloudFormation stacks using a CloudFormation service role onl

D. Use AWS Config rules to detect when resources have drifted from their expected state

E. Allow users to deploy CloudFormation stacks using AWS Service Catalog onl

F. Enforce the use of a launch constrain G

View answer

Correct Answer: A

Question #5

A company has a data ingestion application that runs across multiple AWS accounts. The accounts are in an organization in AWS Organizations. The company needs to monitor the application and consolidate access to the application. Currently the company is running the application on Amazon EC2 instances from several Auto Scaling groups. The EC2 instances have no access to the internet because the data is sensitive Engineers have deployed the necessary VPC endpoints. The EC2 instances run a custom AMI that is b

A. Create an Amazon EventBridge rule to send notifications to the security team whenever a user logs in to an EC2 instance Use EC2 Instance Connect to log in to the instance

B. Deploy Auto Scaling groups by using AWS Cloud Formation Use the cfn-init helper script to deploy appropriate VPC routes for external access Rebuild the custom AMI so that the custom AMI includes AWS Systems Manager Agent

C. Deploy a NAT gateway and a bastion host that has internet access Create a security group that allows incoming traffic on all the EC2 instances from the bastion host Install AWS Systems Manager Agent on all the EC2 instances Use Auto Scaling group lifecycle hooks for monitoring and auditing access Use Systems Manager Session Manager to log into the instances Send logs to a log group m Amazon CloudWatch Log

D. Export data to Amazon S3 for auditing Send notifications to the security team by using S3 event notifications

E. Use EC2 Image Builder to rebuild the custom AMI Include the most recent version of AWS Systems Manager Agent in the Image Configure the Auto Scaling group to attach the AmazonSSMManagedinstanceCore role to all the EC2 instances Use Systems Manager Session Manager to log in to the instances Enable logging of session details to Amazon S3 Create an S3 event notification for new file uploads to send a message to the security team through an Amazon Simple Notification Service (Amazon SNS) topic

F. Use AWS Systems Manager Automation to build Systems Manager Agent into the custom AMI Configure AWS Configure to attach an SCP to the root organization account to allow the EC2 instances to connect to Systems Manager Use Systems Manager Session Manager to log in to the instances Enable logging of session details to Amazon S3 Create an S3 event notification for new file uploads to send a message to the security team through an Amazon Simple Notification Service (Amazon SNS) topic

View answer

Correct Answer: AC

Question #6

A company is hosting a static website from an Amazon S3 bucket. The website is available to customers at example.com. The company uses an Amazon Route 53 weighted routing policy with a TTL of 1 day. The company has decided to replace the existing static website with a dynamic web application. The dynamic web application uses an Application Load Balancer (ALB) in front of a fleet of Amazon EC2 instances. On the day of production launch to customers, the company creates an additional Route 53 weighted DNS rec

A. Delete all objects, including previous versions, from the S3 bucket that contains the static website content

B. Update the weighted DNS record entry that points to the S3 bucke

C. Apply a weight of 0

D. Configure webpage redirect requests on the S3 bucket with a hostname that redirects to the ALB

E. Remove the weighted DNS record entry that points to the S3 bucket from the example

F. Wait for DNS propagation to become complete

View answer

Correct Answer: B

Question #7

A company requires an RPO of 2 hours and an RTO of 10 minutes for its data and application at all times. An application uses a MySQL database and Amazon EC2 web servers. The development team needs a strategy for failover and disaster recovery. Which combination of deployment strategies will meet these requirements? (Select TWO.)

A. Create an Amazon Aurora cluster in one Availability Zone across multiple Regions as the data store Use Aurora's automatic recovery capabilities in the event of a disaster

B. Create an Amazon Aurora global database in two Regions as the data stor

C. In the event of a failure promote the secondary Region as the primary for the application

D. Create an Amazon Aurora multi-master cluster across multiple Regions as the data stor

E. Use a Network Load Balancer to balance the database traffic in different Regions

F. Set up the application in two Regions and use Amazon Route 53 failover-based routing that points to the Application Load Balancers in both Region G

View answer

Correct Answer: BD

Question #8

A company has deployed a critical application in two AWS Regions. The application uses an Application Load Balancer (ALB) in both Regions. The company has Amazon Route 53 alias DNS records for both ALBs. The company uses Amazon Route 53 Application Recovery Controller to ensure that the application can fail over between the two Regions. The Route 53 ARC configuration includes a routing control for both Regions. The company uses Route 53 ARC to perform quarterly disaster recovery (DR) tests. During the most

A. In Route 53 AR

B. create a new assertion safety rul

C. Apply the assertion safety rule to the two routing control

D. Configure the rule with the ATLEAST type with a threshold of 1

E. In Route 53 ARC, create a new gating safety rul

F. Apply the assertion safety rule to the two routing control G

View answer

Correct Answer: B

Question #9

A company is developing an application that will generate log events. The log events consist of five distinct metrics every one tenth of a second and produce a large amount of data The company needs to configure the application to write the logs to Amazon Time stream The company will configure a daily query against the Timestream table. Which combination of steps will meet these requirements with the FASTEST query performance? (Select THREE.)

A. Use batch writes to write multiple log events in a Single write operation

B. Write each log event as a single write operation

C. Treat each log as a single-measure record

D. Treat each log as a multi-measure record

E. Configure the memory store retention period to be longer than the magnetic store retention period

F. Configure the memory store retention period to be shorter than the magnetic store retention period

View answer

Correct Answer: BD

Question #10

A DevOps engineer is planning to deploy a Ruby-based application to production. The application needs to interact with an Amazon RDS for MySQL database and should have automatic scaling and high availability. The stored data in the database is critical and should persist regardless of the state of the application stack. The DevOps engineer needs to set up an automated deployment strategy for the application with automatic rollbacks. The solution also must alert the application team when a deployment fails.

A. Deploy the application on AWS Elastic Beanstal

B. Deploy an Amazon RDS for MySQL DB instance as part of the Elastic Beanstalk configuration

C. Deploy the application on AWS Elastic Beanstal

D. Deploy a separate Amazon RDS for MySQL DB instance outside of Elastic Beanstalk

E. Configure a notification email address that alerts the application team in the AWS Elastic Beanstalk configuration

F. Configure an Amazon EventBridge rule to monitor AWS Health event G

View answer

Correct Answer: D

Question #11

A company has many AWS accounts. During AWS account creation the company uses automation to create an Amazon CloudWatch Logs log group in every AWS Region that the company operates in. The automaton configures new resources in the accounts to publish logs to the provisioned log groups in their Region. The company has created a logging account to centralize the logging from all the other accounts. A DevOps engineer needs to aggregate the log groups from all the accounts to an existing Amazon S3 bucket in the

A. In the logging account create a CloudWatch Logs destination with a destination polic

B. For each new account subscribe the CloudWatch Logs log groups to th

C. Destination Configure a single Amazon Kinesis data stream and a single Amazon Kinesis Data Firehose delivery stream to deliver the logs from the CloudWatch Logs destination to the S3 bucket

D. In the logging account create a CloudWatch Logs destination with a destination policy for each Regio

E. For each new account subscribe the CloudWatch Logs log groups to the destinatio

F. Configure a single Amazon Kinesis data stream and a single Amazon Kinesis Data Firehose delivery stream to deliver the logs from all the CloudWatch Logs destinations to the S3 bucket

View answer

Correct Answer: B

Question #12

A company has an application and a CI/CD pipeline. The CI/CD pipeline consists of an AWS CodePipeline pipeline and an AWS CodeBuild project. The CodeBuild project runs tests against the application as part of the build process and outputs a test report. The company must keep the test reports for 90 days. Which solution will meet these requirements?

A. Add a new stage in the CodePipeline pipeline after the stage that contains the CodeBuild projec

B. Create an Amazon S3 bucket to store the report

C. Configure an S3 deploy action type in the new CodePipeline stage with the appropriate path and format for the reports

D. Add a report group in the CodeBuild project buildspec file with the appropriate path and format for the report

E. Create an Amazon S3 bucket to store the report

F. Configure an Amazon EventBridge rule that invokes an AWS Lambda function to copy the reports to the S3 bucket when a build is complete G

View answer

Correct Answer: C

Question #13

A company has a guideline that every Amazon EC2 instance must be launched from an AMI that the company's security team produces Every month the security team sends an email message with the latest approved AMIs to all the development teams. The development teams use AWS CloudFormation to deploy their applications. When developers launch a new service they have to search their email for the latest AMIs that the security department sent. A DevOps engineer wants to automate the process that the security team u

A. Direct the security team to use CloudFormation to create new versions of the AMIs and to list! the AMI ARNs in an encrypted Amazon S3 object as part of the stack's Outputs Section Instruct the developers to use a cross-stack reference to load the encrypted S3 object and obtain the most recent AMI ARNs

B. Direct the security team to use a CloudFormation stack to create an AWS CodePipeline pipeline that builds new AMIs and places the latest AMI ARNs in an encrypted Amazon S3 object as part of the pipeline output Instruct the developers to use a cross-stack reference within their own CloudFormation template to obtain the S3 object location and the most recent AMI ARNs

C. Direct the security team to use Amazon EC2 Image Builder to create new AMIs and to place the AMI ARNs as parameters in AWS Systems Manager Parameter Store Instruct the developers to specify a parameter of type SSM in their CloudFormation stack to obtain the most recent AMI ARNs from Parameter Store

D. Direct the security team to use Amazon EC2 Image Builder to create new AMIs and to create an Amazon Simple Notification Service (Amazon SNS) topic so that every development team can receive notification

E. When the development teams receive a notification instruct them to write an AWS Lambda function that will update their CloudFormation stack with the most recent AMI ARNs

View answer

Correct Answer: B

Question #14

A company provides an application to customers. The application has an Amazon API Gateway REST API that invokes an AWS Lambda function. On initialization, the Lambda function loads a large amount of data from an Amazon DynamoDB table. The data load process results in long cold-start times of 8-10 seconds. The DynamoDB table has DynamoDB Accelerator (DAX) configured. Customers report that the application intermittently takes a long time to respond to requests. The application receives thousands of requests t

A. Configure provisioned concurrency on the Lambda function with a concurrency value of 1

B. Configure reserved concurrency on the Lambda function with a concurrency value of 0

C. Configure provisioned concurrency on the Lambda functio

D. Configure AWS Application Auto Scaling on the Lambda function with provisioned concurrency values set to a minimum of 1 and a maximum of 100

E. Configure reserved concurrency on the Lambda functio

F. Configure AWS Application Auto Scaling on the API Gateway API with a reserved concurrency maximum value of 100

View answer

Correct Answer: A

Question #15

A company that uses electronic health records is running a fleet of Amazon EC2 instances with an Amazon Linux operating system. As part of patient privacy requirements, the company must ensure continuous compliance for patches for operating system and applications running on the EC2 instances. How can the deployments of the operating system and application patches be automated using a default and custom repository?

A. Use AWS Systems Manager to create a new patch baseline including the custom repositor

B. Run the AWS-RunPatchBaseline document using the run command to verify and install patches

C. Use AWS Direct Connect to integrate the corporate repository and deploy the patchesusing Amazon CloudWatch scheduled events, then use the CloudWatch dashboard to create reports

D. Use yum-config-manager to add the custom repository under /etc/yum

E. Use AWS Systems Manager to create a new patch baseline including the corporate repositor

F. Run the AWS-AmazonLinuxDefaultPatchBaseline document using the run command to verify and install patches

View answer

Correct Answer: A

Question #16

A DevOps engineer manages a web application that runs on Amazon EC2 instances behind an Application Load Balancer (ALB). The instances run in an EC2 Auto Scaling group across multiple Availability Zones. The engineer needs to implement a deployment strategy that: Launches a second fleet of instances with the same capacity as the original fleet. Maintains the original fleet unchanged while the second fleet is launched. Transitions traffic to the second fleet when the second fleet is fully deployed. Terminate

A. Use an AWS CloudFormation template with a retention policy for the ALB set to 1 hou

B. Update the Amazon Route 53 record to reflect the new ALB

C. Use two AWS Elastic Beanstalk environments to perform a blue/green deployment from the original environment to the new on

D. Create an application version lifecycle policy to terminate the original environment in 1 hour

E. Use AWS CodeDeploy with a deployment group configured with a blue/green deployment configuration Select the option Terminate the original instances in the deployment group with a waiting period of 1 hour

F. Use AWS Elastic Beanstalk with the configuration set to Immutabl G

View answer

Correct Answer: C

Question #17

A company uses AWS Organizations to manage multiple accounts. Information security policies require that all unencrypted Amazon EBS volumes be marked as non-compliant. A DevOps engineer needs to automatically deploy the solution and ensure that this compliance check is always present. Which solution will accomplish this?

A. Create an AWS CloudFormation template that defines an AWS Inspector rule to check whether EBS encryption is enable

B. Save the template to an Amazon S3 bucket that has been shared with all accounts within the compan

C. Update the account creation script pointing to the CloudFormation template in Amazon S3

D. Create an AWS Config organizational rule to check whether EBS encryption is enabled and deploy the rule using the AWS CL

E. Create and apply an SCP to prohibit stopping and deleting AWS Config across the organization

F. Create an SCP in Organization G

View answer

Correct Answer: D

Question #18

A company hosts a security auditing application in an AWS account. The auditing application uses an IAM role to access other AWS accounts. All the accounts are in the same organization in AWS Organizations. A recent security audit revealed that users in the audited AWS accounts could modify or delete the auditing application's IAM role. The company needs to prevent any modification to the auditing application's IAM role by any entity other than a trusted administrator IAM role. Which solution will meet thes

A. Create an SCP that includes a Deny statement for changes to the auditing application's IAM rol

B. Include a condition that allows the trusted administrator IAM role to make change

C. Attach the SCP to the root of the organization

D. Create an SCP that includes an Allow statement for changes to the auditing application's IAM role by the trusted administrator IAM rol

E. Include a Deny statement for changes by all other IAM principal

F. Attach the SCP to the IAM service in each AWS account where the auditing application has an IAM role

View answer

Correct Answer: CD

Question #19

A company has a legacy application A DevOps engineer needs to automate the process of building the deployable artifact for the legacy application. The solution must store the deployable artifact in an existing Amazon S3 bucket for future deployments to reference Which solution will meet these requirements in the MOST operationally efficient way?

A. Create a custom Docker image that contains all the dependencies tor the legacy application Store the custom Docker image in a new Amazon Elastic Container Registry (Amazon ECR) repository Configure a new AWS CodeBuild project to use the custom Docker image to build the deployable artifact and to save the artifact to the S3 bucket

B. Launch a new Amazon EC2 instance Install all the dependencies (or the legacy application on the EC2 instance Use the EC2 instance to build the deployable artifact and to save the artifact to the S3 bucket

C. Create a custom EC2 Image Builder image Install all the dependencies for the legacy application on the image Launch a new Amazon EC2 instance from the image Use the new EC2 instance to build the deployable artifact and to save the artifact to the S3 bucket

D. Create an Amazon Elastic Kubernetes Service (Amazon EKS) cluster with an AWS Fargate profile that runs in multiple Availability Zones Create a custom Docker image that contains all the dependencies for the legacy application Store the custom Docker image in a new Amazon Elastic Container Registry (Amazon ECR) repository Use the custom Docker image inside the EKS cluster to build the deployable artifact and to save the artifact to the S3 bucket

View answer

Correct Answer: B

Question #20

A business has an application that consists of five independent AWS Lambda functions. The DevOps engineer has built a CI/CD pipeline using AWS CodePipeline and AWS CodeBuild that builds tests packages and deploys each Lambda function in sequence. The pipeline uses an Amazon EventBridge rule to ensure the pipeline starts as quickly as possible after a change is made to the application source code. After working with the pipeline for a few months the DevOps engineer has noticed the pipeline takes too long to

A. Modify the CodeBuild projects within the pipeline to use a compute type with more available network throughput

B. Create a custom CodeBuild execution environment that includes a symmetricmultiprocessing configuration to run the builds in parallel

C. Modify the CodePipeline configuration to run actions for each Lambda function in parallel by specifying the same runorder

D. Modify each CodeBuild protect to run within a VPC and use dedicated instances to increase throughput

View answer

Correct Answer: AE

Question #21

The security team depends on AWS CloudTrail to detect sensitive security issues in the company's AWS account. The DevOps engineer needs a solution to auto- remediate CloudTrail being turned off in an AWS account. What solution ensures the LEAST amount of downtime for the CloudTrail log deliveries?

A. Create an Amazon EventBridge rule for the CloudTrail StopLogging even

B. Create an AWS Lambda (unction that uses the AWS SDK to call StartLogging on the ARN of the resource in which StopLogging was calle

C. Add the Lambda function ARN as a target to the EventBridge rule

D. Deploy the AWS-managed CloudTrail-enabled AWS Config rule set with a periodic interval to 1 hou

E. Create an Amazon EventBridge rule tor AWS Config rules compliance chang

F. Create an AWS Lambda function that uses the AWS SDK to call StartLogging on the ARN of the resource in which StopLoggmg was calle G

View answer

Correct Answer: A

Question #22

A company's DevOps engineer is creating an AWS Lambda function to process notifications from an Amazon Simple Notification Service (Amazon SNS) topic. The Lambda function will process the notification messages and will write the contents of the notification messages to an Amazon RDS Multi-AZ DB instance. During testing a database administrator accidentally shut down the DB instance. While the database was down the company lost several of the SNS notification messages that were delivered during that time. Th

A. Replace the RDS Multi-AZ DB instance with an Amazon DynamoDB table

B. Configure an Amazon Simple Queue Service (Amazon SQS) queue as a destination of the Lambda function

C. Configure an Amazon Simple Queue Service (Amazon SQS> dead-letter queue for the SNS topic

D. Subscribe an Amazon Simple Queue Service (Amazon SQS) queue to the SNS topic Configure the Lambda function to process messages from the SQS queue

E. Replace the SNS topic with an Amazon EventBridge event bus Configure an EventBridge rule on the new event bus to invoke the Lambda function for each event

View answer

Correct Answer: C

Question #23

A company is using AWS CodePipeline to automate its release pipeline. AWS CodeDeploy is being used in the pipeline to deploy an application to Amazon Elastic Container Service (Amazon ECS) using the blue/green deployment model. The company wants to implement scripts to test the green version of the application before shifting traffic. These scripts will complete in 5 minutes or less. If errors are discovered during these tests, the application must be rolled back. Which strategy will meet these requirements

A. Add a stage to the CodePipeline pipeline between the source and deploy stage

B. Use AWS CodeBuild to create a runtime environment and build commands in the buildspec file to invoke test script

C. If errors are found, use the aws deploy stop-deployment command to stop the deployment

D. Add a stage to the CodePipeline pipeline between the source and deploy stage

E. Use this stage to invoke an AWS Lambda function that will run the test script

F. If errors are found, use the aws deploy stop-deployment command to stop the deployment

View answer

Correct Answer: B

Question #24

A company's application uses a fleet of Amazon EC2 On-Demand Instances to analyze and process data. The EC2 instances are in an Auto Scaling group. The Auto Scaling group is a target group for an Application Load Balancer (ALB). The application analyzes critical data that cannot tolerate interruption. The application also analyzes noncritical data that can withstand interruption. The critical data analysis requires quick scalability in response to real-time application demand. The noncritical data analysis

A. For the critical data, modify the existing Auto Scaling grou

B. Create a warm pool instance in the stopped stat

C. Define the warm pool siz

D. Create a new version of the launch template that has detailed monitoring enable

E. use Spot Instances

F. For the critical data, modify the existing Auto Scaling grou G

View answer

Correct Answer: D

Question #25

A DevOps engineer is creating an AWS CloudFormation template to deploy a web service. The web service will run on Amazon EC2 instances in a private subnet behind an Application Load Balancer (ALB). The DevOps engineer must ensure that the service can accept requests from clients that have IPv6 addresses. What should the DevOps engineer do with the CloudFormation template so that IPv6 clients can access the web service?

A. Add an IPv6 CIDR block to the VPC and the private subnet for the EC2 instance

B. Create route table entries for the IPv6 network, use EC2 instance types that support IPv6, and assign IPv6 addresses to each EC2 instance

C. Assign each EC2 instance an IPv6 Elastic IP addres

D. Create a target group, and add the EC2 instances as target

E. Create a listener on port 443 of the ALB, and associate the target group with the ALB

F. Replace the ALB with a Network Load Balancer (NLB)

View answer

Correct Answer: A

Question #26

A company has multiple AWS accounts. The company uses AWS IAM Identity Center (AWS Single Sign-On) that is integrated with AWS Toolkit for Microsoft Azure DevOps. The attributes for access control feature is enabled in IAM Identity Center. The attribute mapping list contains two entries. The department key is mapped to ${path:enterprise.department}. The costCenter key is mapped to ${path:enterprise.costCenter}. All existing Amazon EC2 instances have a department tag that corresponds to three company departm

A.

B.

C.

D. A

View answer

Correct Answer: CEF

Question #27

A DevOps team is merging code revisions for an application that uses an Amazon RDS Multi-AZ DB cluster for its production database. The DevOps team uses continuous integration to periodically verify that the application works. The DevOps team needs to test the changes before the changes are deployed to the production database. Which solution will meet these requirements'?

A. Use a buildspec file in AWS CodeBuild to restore the DB cluster from a snapshot of the production database run integration tests, and drop the restored database after verification

B. Deploy the application to productio

C. Configure an audit log of data control language (DCL) operations to capture database activities to perform if verification fails

D. Create a snapshot of the DB duster before deploying the application Use the Update requires Replacement property on the DB instance in AWS CloudFormation to deploy the application and apply the changes

E. Ensure that the DB cluster is a Multi-AZ deploymen

F. Deploy the application with the update G

View answer

Correct Answer: ADE

DON'T WANT TO MISS A THING?

100% Pass Cisco, PMP, CISA, CISM, AWS Practice test on SALE!
Get Now

Pass Your DOP-C02 Exam with Practice Tests 2024 Updated, AWS Certified DevOps Engineer - Professional | SPOTO

View Answers after Submission

DON'T WANT TO MISS A THING?

100% Pass Cisco, PMP, CISA, CISM, AWS Practice test on SALE! Get Now

Pass Your DOP-C02 Exam with Practice Tests 2024 Updated, AWS Certified DevOps Engineer - Professional | SPOTO

View Answers after Submission

100% Pass Cisco, PMP, CISA, CISM, AWS Practice test on SALE!
Get Now