DON'T WANT TO MISS A THING?

Certification Exam Passing Tips

Latest exam news and discount info

Curated and up-to-date by our experts

Yes, send me the newsletter

Latest Cisco 300-510 Actual Free Exam Questions | Practice Tests & Study Materials

Preparing for the Cisco 300-510 exam can be more efficient with access to the latest actual free exam questions. These real exam questions and answers provide a clear understanding of the format and key topics, ensuring you’re familiar with the types of questions you’ll encounter. Exam practice questions allow you to identify areas where further study may be needed, while practice exams give you a realistic experience of the testing environment. Certification practice tests are crucial for refining your knowledge and skills, helping you stay on track with your exam preparation. High-quality study materials combined with actual exam questions will boost your confidence and improve your chances of passing the Cisco 300-510 exam. Make sure you’re fully prepared by using these free resources to practice and succeed on your first attempt.
Take other online exams
Question #1
A network operator working for a telecommunication company is planning to implement the Nonstop Forwarding (NSR) feature on the customer's core network. After getting the configuration ready for NSR, on which router should the opera to implement NSR changes?
A. n the CE router
B. n the ABR router
C. n the ASBR router
D. n the PE route
View answer
Correct Answer: D
Question #2
What is a requirement of PIM-SM?
A. t requires Cisco Express Forwarding to be enabled
B. t must use an RP
C. t must be enabled on loopback interfaces only
D. t requires OSPF to be configured on the network
View answer
Correct Answer: B
Question #3
An ISP has an MPLS VPN-based network with 12 PE routers. How many peerings are required between the 12 routers if the engineer has not configured route reflectors?
A. 0
B. 6
C. 8
D.
View answer
Correct Answer: B
Question #4
The ISP_A network is configured with PIMv2 with sparse mode. The engineering team at ISP_A must implement multicast support following RFC 5059 in the network. The RP priority will be 0, and the solution must require limited supervision from the operations team. Which action must the team take to meet the requirements?
A. mplement bootstrap router in the network core
B. mplement Auto-RP on the candidate RP and the mapping agent only
C. mplement Anycast-RP on edge routers only
D. mplement Static RP across all routers in the network
View answer
Correct Answer: A
Question #5
How does SRv6 function on the control plane?
A. he ingress node of the SR domain swaps the SRv6 header for the IPv6 header
B. he ingress node of the SR domain adds a uSID format lPv6 header to carry the SRv6 locator
C. he egress node of the SR domain imposes a new outer IPv6 header
D. t enables SRH-capable nodes to terminate lPv6 packets at the network egress to carry the SRv6 locator
View answer
Correct Answer: D
Question #6
The operator must leverage automated steering and coloring with the design. Which two elements from an SR Policy tuple are used for automated steering inside of the network?
A. eadend
B. M paths
C. ndpoint
D. andidate labels
E. olo
View answer
Correct Answer: CE
Question #7
Which feature provides service independence in service provider networks?
A. refix SID that contains router hops toward the destination
B. inding SID that is used to stitch different domains
C. djacency SID that represents a path between the routers
D. ode SID that identifies the network devic
View answer
Correct Answer: B
Question #8
Level 3 switch SW1 is part of an EIGRP-enabled network located at the edge of an area. Cisco Express Forwarding and SO are enabled on the router. A network engineer must minimize the downtime of data- transit services in the network. HSRP group 2 has already been configured with standby preempt delay minimum 2 and standby timers 140. Which additional action must the engineer take on SW to suppress routing flaps for 2 minutes?
A. onfigure timers standby 2 wait 2 under the HSRP group 2 configuration
B. onfigure timers standby 2 converge 120 under the HSRP group 2 configuration
C. onfigure timers nsf route-hold 120 under the global EIGRP configuration
D. onfigure timers nsf signal 2 under the global EIGRP IPv4 address family
View answer
Correct Answer: C
Question #9
Which technique should be permitted on ASA Firewall to allow MSDP Peering?
A. ulticast BGP carrying MSDP messages
B. CP socket(s) carrying MSDP messages
C. DP socket(s) carrying MSDP messages
D. IMv2 messages carrying MSDP message
View answer
Correct Answer: B
Question #10
What is the difference between a source tree and a shared tree in a multicast environment?
A. o stream multicast from source to receiver, a source tree uses PIM-SM and a shared tree uses PIM- DM
B. source tree has its root at the source, and a shared tree has its root at a designated rendezvous point
C. ource trees are the default type for bidirectional PIM, and PIM-DM uses shared trees by default
D. o route traffic from source to receiver, a source tree uses a link state routing protocol and a shared tree uses a distance-vector routing protocol
View answer
Correct Answer: B
Question #11
Which keyword is used with the match route-type command to redistribute the external BGP and IGP routes using route map?
A. atch route-type type-2
B. atch route-type type-1
C. atch route-type nssa-external
D. atch route-type externa
View answer
Correct Answer: D
Question #12
What is the role of a segment routing mapping server?
A. t works with IGP instances to calculate the prefix SIDs in the absence of a mapping policy
B. t advertises a local SID mapping policy to all of the mapping clients
C. t selects multiple mapping entries to create overlapping active mapping policies
D. t reads and translates remotely received SIDs from other mapping servers to create SID mapping entries
View answer
Correct Answer: B
Question #13
Which IPv6 prefix format defines the destination of a dynamic 6to4 tunnel?
A. 001:db8::/32
B. 002::/16
C. e80::/10
D. f00::/
View answer
Correct Answer: B
Question #14
An engineer wants to map a multicast IP address to a multicast MAC. How many bits are used to make the conversion?
A. ower-order 24 bits
B. ow-order 23 bits
C. igher-order 23 bits
D. igh-order 24 bit
View answer
Correct Answer: B
Question #15
What are two features of dual-stack?
A. t is implemented without excessive processing power
B. t securely routes and tunnels traffic between separate sites over the Internet
C. t requires tunneling IPv6 traffic over an IPv4 infrastructure
D. t allows an engineer to stack multiple Layer 2 switches to serve as a single switching unit
E. t supports IPv4 and IPv6 traffic on the same infrastructure
View answer
Correct Answer: AE
Question #16
Which expression, when used with the as-path-set command, matches the AS path attribute of the route?
A. fa-regex
B. eighbor-is
C. os-regex
D. engt
View answer
Correct Answer: C
Question #17
What is a characteristic of a segment routing mapping server?
A. t must have an IGP adjacency
B. t must be placed in the core of the network
C. t serves multiple VRFs
D. t applies SID mappings from one IGP instance to another IGP instance
View answer
Correct Answer: A
Question #18
Which difference must an engineer consider when implementing inter-domain and intra-domain multicast routing on the network?
A. nter-domain routing supports policy routing to connect different multicast domains using PIM-SM, but intra-domain routing supports policy routing using PIM-SM only within a single domain
B. ntra-domain routing allows the service provider to control incoming and outgoing multicast data streams on its network, but inter-domain routing limits the service provider's control
C. ntra-domain routing uses the PIM and MBGP protocols for multicast routing, but inter-domain routing
D. ntra-domain routing is dependent on the RP router within the same SP network, but inter-domain routing reduces the dependency on the other SP network
View answer
Correct Answer: D
Question #19
What is a feature of SRGB label values?
A. hey are used for adjacency segment identifiers
B. hey are locally significant
C. hey are assigned to segment routing nodes and have global significance throughout the domain
D. hey allow IS-IS and OSPF to use overlapping ranges on a domain
View answer
Correct Answer: C
Question #20
Which two differences should be considered when deciding whether to implement routing policies or route maps?
A. equences are added after implementing a route map, but routing policies must be reconfigured when change is needed
B. oute maps are supported in Cisco IOS Software and routing policies are supported in Cisco IOS XR Software
C. oute policies require sequence numbers, but route maps are implemented without sequencing
D. oute maps require an explicit deny at the end of the sequence, but routing policies have an implicit deny at the end of the program
E. oute maps are implemented using hierarchical policies, but routing policies must be implemented sequentiall
View answer
Correct Answer: AB

View Answers after Submission

Please submit your email and WhatsApp to get the answers of questions.

Note: Please make sure your email ID and Whatsapp are valid so that you can get the correct exam results.

Email:
Whatsapp/phone number:


Copyright © 2024. Designer by SPOTO Official Website. All Rights Reserved.