DON'T WANT TO MISS A THING?

Certification Exam Passing Tips

Latest exam news and discount info

Curated and up-to-date by our experts

Yes, send me the newsletter

Latest 2024 Juniper JN0-648 Certification Questions & Mock Tests, Juniper JNCIP-ENT Certification | SPOTO

Elevate your Juniper JNCIP-ENT certification journey with our cutting-edge 2024 exam preparation resources. Our high-quality practice tests feature the latest exam questions, sample questions, and exam dumps, ensuring you stay ahead of the curve. Gain confidence through realistic mock exams that simulate the actual certification environment. Our free test resources, including exam practice and online exam questions with detailed answers, provide a comprehensive learning experience. Developed by industry experts, our exam questions and answers cover advanced routing technologies, Junos OS configuration, and troubleshooting skills for enterprise routing and switching platforms. Invest in our proven JNCIP-ENT exam materials and unlock your path to professional success.
Take other online exams
Question #1
You are asked to deploy 802.1X on your EX Series switches. You need to ensure authenticated devices continue to have access to the network even if the authentication server fails. Which action meets this configuration objective?
A. Configure the server fail fallback with a value of sustain
B. Set the reauthentication interval to a value of 0
C. Configure the static MAC bypass for the authentication server
D. Set the reauthentication interval to a value of disable
View answer
Correct Answer: AB
Question #2
Which two statements are true about IS-IS levels? (Choose two.)
A. Level 2 systems do not advertise Level 2 routes into a Level area by default
B. Level 2 systems must use the loopback address as a part of the ISO network address
C. Level 1 system only from adjacencies with other systems that have different area IDs
D. Level 1 systems use a default route to reach AS external routes located in other areas
View answer
Correct Answer: BD
Question #3
Which two statements about OSPF routing policies are correct? (Choose two.)
A. By default, OSPF export policies reject network-summary LSAs
B. By default, OSPF export policies accept network-summary LSAs
C. By default, OSPF import policies accept network-summary LSAs
D. By default, OSPF import policies reject network-summary LSAs
View answer
Correct Answer: A
Question #4
You are designing a multicast topology to support IPv4 IPTV broadcasts in your organization. The design should support multiple multicast senders with overlapping group addresses while preventing interference between them. Client devices currently do not support IGMPv3. Which approach would fulfill these requirements?
A. Implement PIM-SM and SSM with SSM maps to support IGMPv2 clients
B. Implement bidirectional PIM
C. Assign group addresses in the 224/4 range and implement PIM-DM
D. Implement MLD
View answer
Correct Answer: C
Question #5
Exhibit. Referring to the configuration shown in the exhibit, how many of the routes received from 10.0.0.2 will be active in the routing table?
A. 2
B. 8
C. 3
D. 5
View answer
Correct Answer: ACD
Question #6
Click the Exhibit button. You are adding VNI 101 to your EVPN-VXLAN network, but traffic is not being sent or received. Referring to the exhibit, which configuration statement will solve the problem?
A. set routing-instances EVPN1 instance-type evpn
B. set routing-instances EVPN1 vxlan encapsulate-inner-vlan
C. set routing-instances EVPN1 bridge-domains BD-101 vxlan vni 101
D. set routing-instances EVPN1 vrf-table-label
View answer
Correct Answer: C
Question #7
You have configured class mode power management on an EX4300 to provide PoE power to telephone and security camera equipment. You want to ensure that security camera power takes priority over telephone power. Which two actions would solve this problem? (Choose two.)
A. Connect the security cameras to the lowest port numbers on the switch
B. Set the power priority to high on ports connected to security cameras
C. Set the maximum power settings on ports connected to security cameras
D. Set the power priority to low on ports connected to security cameras
View answer
Correct Answer: D
Question #8
Click the Exhibit button. Referring to the exhibit, the source is currently sending multicast traffic using group 224.1.1.1, which is being received by R1. R2 is not receiving PIM register messages. What would be the cause of this problem?
A. Tunnel services have not been enabled on R1
B. All routers have not been configured with the same Auto-RP discovery group
C. R5 has not received an IGMP report of 224
D. A(*,G) tree has not been built yet
View answer
Correct Answer: AB
Question #9
Click the Exhibit button. Referring to the exhibit, how is R5 able to learn the networks that exist within the NSSA?
A. R5 learns those networks from Type 3 LSAs advertised by R2
B. R5 learns those networks from Type 3 LSAs advertised by R3
C. R5 does not learn those networks and uses a default route advertised by R3 instead
D. R5 does not learn those networks but uses a default route advertised by R2 instead
View answer
Correct Answer: AD
Question #10
What are three well-known mandatory BGP attributes? (Choose three.)
A. AS-path
B. community
C. origin
D. MED
E. next-hop
View answer
Correct Answer: A
Question #11
You are deploying IP phones in your Layer 2 network and are asked to ensure that the switch sends VLAN and CoS information to the IP phones automatically. In this scenario, which protocol should be used?
A. PoE
B. PoE+
C. LLDP
D. LLDP_MED
View answer
Correct Answer: ACE
Question #12
Your network is configured for EVPN load balancing on three different access switches During an outage, you notice that not all interfaces are receiving traffic as expected Which two requirements would you validate to identify this problem? (Choose two )
A. Validate that the same esi value is only configured on one interface per switch
B. Validate that the same esi value is configured on multiple interfaces on all switches
C. Validate that all-active is configured for only interface per switch
D. Validate that the all-active flag configured for multiple interfaces on each switch
View answer
Correct Answer: C
Question #13
Which protocol is used for port-level access control and authentication?
A. MD5
B. IPsec
C. 802
D. AES
View answer
Correct Answer: AC
Question #14
You receive the same 100.200.0/16 route from all four ISPs to which you are connected. Referring to the exhibit, which ISP's route will be selected as active?
A. ISP-A
B. ISP-B
C. ISP-C
D. ISP-D
View answer
Correct Answer: D
Question #15
You are currently using VLAN IDs 2 through 300 within your Layer 2 domain and you need to configure VSTP to prevent loops You must ensure that all VL ANs are loop free. In this scenario, which statement is correct?
A. You must enable RSTP to account for all VLANs
B. You must ensure that the VLANs are balanced between two different root bridges
C. You must ensure that the bridge priority is set to the lowest value on all switches in the Layer 2 domain
D. You must enable all VLANs, 2 through 300, under the VSTP configuration
View answer
Correct Answer: C
Question #16
Which two statements are true regarding bidirectional PIM? (Choose two )
A. It eliminates the need for an RP
B. Devices only store group specific entries
C. It uses multicast tunneling to forward traffic
D. Forwarding paths can be suboptimal
View answer
Correct Answer: D
Question #17
You are implementing 802.1x access control in your network of EX Series switches. You have some older client devices connecting to your network which do not support 802.1x. Which statement is true regarding the older devices?
A. By default, the supplicant will send EAP messages and keep the port in an unauthorized state
B. By default, the authenticator will send EAP messages and keep the port in an unauthorized state
C. By default, the supplicant will send EAP messages until it reaches a predefined limit, after which it begins to forward traffic
View answer
Correct Answer: BD
Question #18
What are two supported PoE management modes? (Choose two.)
A. mixed
B. standalone
C. class
D. static
View answer
Correct Answer: A
Question #19
In IS-IS advertising POUs with the overload bit has which effect?
A. The local device will no longer be used for transit traffic
B. The local device's POUs are marked with a metric of 65535
C. The ISIS adjacencies become passive
D. The IS-IS adjacencies enter the "new" state
View answer
Correct Answer: C
Question #20
Exhibit. You are implementing CoS for a custom application that is labeling its packets with DSCP code-point 101111. You have applied the configuration shown in the exhibit, but not that while some custom application traffic ingressin on ge-0/0/1 transits the SRX Series device successfully, packets ingressing all other ge-* interfaces are being dropped. Which action should you take to solve this problem?
A. Configure a scheduler and scheduler map for expedited-forwarding and apply to all interfaces
B. Modify the BA classifier to assign code point 101111 to loss priority low
C. Remove the BA classifier from all ge-interfaces
D. Apply the rate-limit-ef policer to all ge-interfaces
View answer
Correct Answer: D

View Answers after Submission

Please submit your email and WhatsApp to get the answers of questions.

Note: Please make sure your email ID and Whatsapp are valid so that you can get the correct exam results.

Email:
Whatsapp/phone number:


Copyright © 2024. Designer by SPOTO Official Website. All Rights Reserved.