DON'T WANT TO MISS A THING?

Certification Exam Passing Tips

Latest exam news and discount info

Curated and up-to-date by our experts

Yes, send me the newsletter

Latest 2024 JN0-351 Certification Questions & Mock Tests, Juniper JNCIS-ENT Certification | SPOTO

Prepare for your Juniper JNCIS-ENT certification with our latest practice tests and mock exams. Our comprehensive exam materials include free test samples, online exam questions, and high-quality exam dumps to enhance your exam practice. With a variety of sample questions and exam questions and answers, you can effectively strengthen your knowledge and readiness. The JNCIS-ENT certification track is designed to demonstrate your competence with networking technology and Juniper Networks enterprise routing and switching platforms. It is tailored for experienced networking professionals with beginner to intermediate knowledge of routing and switching implementations in Junos. The written exam evaluates your understanding of routing and switching technologies, platform configuration, and troubleshooting skills. Utilize our high-quality practice tests to ensure your success and pass the certification exam with confidence.
Take other online exams
Question #1
Exhibit. Why is this OSPF adjacency remaining in this state? The exhibit shows the output of the commandshow ospf neighbor, which displays information about the OSPF neighbors on a router1. The output shows that the OSPF neighbor with the address 172.26.1.1 and the interface ge-0/0/3.0 is in the Exstart state1. The Exstart state is the fourth state in the OSPF neighbor formation process, after Down, Init, and 2-Way states2.In this state, the OSPF neighbors establish a master-slave relationship and exchange
A. subnet mask mismatch exists between the OSPF neighbors
B. n MTU mismatch exists between the OSPF neighbors
C. hello interval mismatch exists between the OSPF neighbors
D. n area ID mismatch exists between the OSPF neighbors
View answer
Correct Answer: B

View The Updated JN0-351 Exam Questions

SPOTO Provides 100% Real JN0-351 Exam Questions for You to Pass Your JN0-351 Exam!

Get JN0-351 Practice Test
Question #2
Which statement is correct about the storm control feature? Option A is correct.The storm control feature is enabled in the factory-default configuration on EX Series switches12.On EX2200, EX3200, EX3300, EX4200, and EX6200 switches, the factory default configuration enables storm control for broadcast and unknown unicast traffic on all switch interfaces2.On EX4300 switches, the factory default configuration enables storm control on all Layer 2 switch interfaces1. Option B is incorrect.The storm control fea
A. he storm control feature is enabled in the factory-default configuration on EX Series switches
B. he storm control feature requires a special license on EX Series switches
C. he storm control feature is not supported on aggregate Ethernet interfaces
D. he storm control configuration only applies to traffic being sent between the forwarding and control plane
View answer
Correct Answer: A
Question #3
After receiving a BGP route, which two conditions are verified by the receiving router to ensure that the received route is valid? (Choose two) Bis correct because the loops do not exist is one of the conditions that are verified by the receiving router to ensure that the received BGP route is valid.A loop in BGP means that a route has been advertised by the same AS more than once, which can cause routing instability and inefficiency1.To prevent loops, BGP uses the AS-path attribute, which lists the AS numb
A. he AS-path length is greater than 0
B. he loops do not exist
C. he next hop is reachable
D. he local preference is greater than 0
View answer
Correct Answer: BC
Question #4
Which two mechanisms are part of building and maintaining a Layer 2 bridge table? (Choose two.) Option B is correct.Flooding is a mechanism used in Layer 2 bridging where the switch sends incoming packets to all its ports except for the port where the packet originated1.This is done when the switch doesn't know the destination MAC address or when the packet is a broadcast or multicast1. Option C is correct.Learning is another mechanism used in Layer 2 bridging where the switch learns the source MAC addresse
A. locking
B. looding
C. earning
D. istening
View answer
Correct Answer: BC
Question #5
Exhibit You are troubleshooting an issue where traffic to 192.168.10.0/24 is being sent to R1 instead of your desired path through R2. Referring to the exhibit, what is the reason for the problem? The exhibit shows the output of the commandshow ip bgp, which displays information about the BGP routes in the routing table1. The output shows two routes for the destination 192.168.10.0/24, one from R1 and one from R2. The route from R1 has a local preference of 200, while the route from R2 has a local preferen
A. 2's route is not the best path due to loop prevention
B. 2's route is not the best path due to a lower origin code
C. 1's route is the best path due to a higher local preference
D. 1's route is the best path due to the shorter AS path
View answer
Correct Answer: C

View The Updated Juniper Exam Questions

SPOTO Provides 100% Real Juniper Exam Questions for You to Pass Your Juniper Exam!

Get Juniper Practice Test

View Answers after Submission

Please submit your email and WhatsApp to get the answers of questions.

Note: Please make sure your email ID and Whatsapp are valid so that you can get the correct exam results.

Email:
Whatsapp/phone number:


Copyright © 2024. Designer by SPOTO Official Website. All Rights Reserved.