Free VMware 2V0-41.24 Practice Questions & Answers 2026 Part3 | Network Virtualization

An NSX administrator wants to create a Tier-0 Gateway to support equal cost multi-path (ECMP) routing.Which failover detection protocol must be used to meet this requirement?

In which VPN type are the Virtual Tunnel interfaces (VTI) used?

Which NSX CLI command is used to change the authentication policy for local users?

Which two of the following parameters are required for deploying the NSX Application Platform? (Choose two.) Cluster Format Type: This parameter specifies the type of cluster format that will be used for the NSX Application Platform deployment. Upload Kubernetes Configuration File: NSX Application Platform requires a Kubernetes environment, and the configuration file for Kubernetes must be uploaded to facilitate the deployment.

In which VPN type are the Virtual Tunnel interfaces (VTI) used?

A company security policy requires all users to log into applications using a centralized authentication system.Which two authentication, authorization, and accounting (AAA) systems are available when integrating NSX with VMware Identity Manager? (Choose two.)

What is the VMware recommended way to deploy a virtual NSX Edge Node?

Which two of the following will be used for ingress traffic on the Edge node supporting a Single Tier topology? (Choose two.)

Which two are supported by L2 VPN clients? (Choose two.)

Which three selections are capabilities of Network Topology? (Choose three.)

An administrator has been tasked with implementing the SSL certificates for the NSX Manager Cluster VIP.Which is the correct way to implement this change?

What is VMware’s recommendation for the minimum MTU requirements when planning an NSX deployment?

What should an NSX administrator check to verify that VMware Identity Manager integration is successful?

An administrator has been tasked with implementing the SSL certificates for the NSX Manager Cluster VIP.Which is the correct way to implement this change?

A company security policy requires all users to log into applications using a centralized authentication system.Which two authentication, authorization, and accounting (AAA) systems are available when integrating NSX with VMware Identity Manager? (Choose two.)

An administrator has been tasked with implementing the SSL certificates for the NSX Manager Cluster VIP.Which is the correct way to implement this change?

An NSX administrator wants to create a Tier-0 Gateway to support equal cost multi-path (ECMP) routing.Which failover detection protocol must be used to meet this requirement?

An NSX administrator wants to create a Tier-0 Gateway to support equal cost multi-path (ECMP) routing.Which failover detection protocol must be used to meet this requirement?

An NSX administrator would like to export syslog events that capture messages related to NSX host preparation events. Which message ID (msgid) should be used in the syslog export configuration command as a filter?

An NSX administrator would like to export syslog events that capture messages related to NSX host preparation events.Which message ID (msgid) should be used in the syslog export configuration command as a filter?

In which VPN type are the Virtual Tunnel interfaces (VTI) used?

In an NSX environment, an administrator is observing low throughput and congestion between the Tier-0 Gateway and the upstream physical routers.Which two actions could address low throughput and congestion? (Choose two.)

A company security policy requires all users to log into applications using a centralized authentication system.Which two authentication, authorization, and accounting (AAA) systems are available when integrating NSX with VMware Identity Manager? (Choose two.)

A company security policy requires all users to log into applications using a centralized authentication system.Which two authentication, authorization, and accounting (AAA) systems are available when integrating NSX with VMware Identity Manager? (Choose two.)

An administrator wants to validate the BGP connection status between the Tier-0 Gateway and the upstream physical router. What sequence of commands could be used to check this status on NSX Edge node? To validate the BGP connection status between the Tier-0 Gateway and the upstream physical router on an NSX Edge node, the correct sequence involves enabling the specific logical router (Tier-0 Gateway), checking the VRF (Virtual Routing and Forwarding) context, and then using the show bgp neighbor command to view the BGP session status. enable : This command enables the logical router interface (Tier-0 Gateway) to access its configuration. get vrf : This command checks the specific VRF (used for routing separation) to see the associated routing table. show bgp neighbor: This command displays the status of the BGP connection, including details about the neighbor relationships and their state.

Which two BGP configuration parameters can be configured in the VRF Lite gateways? (Choose two.)

In an NSX environment, an administrator is observing low throughput and congestion between the Tier-0 Gateway and the upstream physical routers.Which two actions could address low throughput and congestion? (Choose two.)

An NSX administrator has deployed a single NSX Manager node and will be adding two additional nodes to form a 3-node NSX Management Cluster for a production environment. The administrator will deploy these two additional nodes and Cluster VIP using the NSX UI.What two are the prerequisites for this configuration? (Choose two.)

What are four NSX built-in rote-based access control (RBAC) roles? (Choose four.)

Which two tools could be used to view NSX Policy logs?(Choose two.)

A centralized packet analysis tool VM configured to monitor a NSX-T deployment is dropping some of the packets sent to it.Which three actions could minimize the drops?(Choose three.)

In which VPN type are the Virtual Tunnel interfaces (VTI) used?

Which two commands does an NSX administrator use to check the IP address of the VMkernel port for the Geneve protocol on the ESXi transport node? (Choose two.)

A company security policy requires all users to log into applications using a centralized authentication system.Which two authentication, authorization, and accounting (AAA) systems are available when integrating NSX with VMware Identity Manager? (Choose two.)

Which VMware NSX Portfolio product can be described as a distributed analysis solution that provides visibility and dynamic security policy enforcement for NSX environments?

Which two are supported by L2 VPN clients? (Choose two.)

An NSX administrator has deployed a single NSX Manager node and will be adding two additional nodes to form a 3 - node NSX Management Cluster for a production environment. The administrator will deploy these two additional nodes and Cluster VIP using the NSX UI. What two are the prerequisites for this configuration? (Choose two.)

Which CLI command does an NSX administrator run on the NSX Manager to generate support bundle logs if the NSX UI is inaccessible?

An NSX administrator would like to export syslog events that capture messages related to NSX host preparation events.Which message ID (msgid) should be used in the syslog export configuration command as a filter?

Which two choices are solutions offered by the VMware NSX portfolio? (Choose two.) VMware NSX is a portfolio of networking and security solutions that enables consistent policy, operations, and automation across multiple cloud environments1 The VMware NSX portfolio includes the following solutions: VMware NSX Data Center: A platform for data center network virtualization and security that delivers a complete L2-L7 networking stack and overlay services for any workload1 VMware NSX Cloud: A service that extends consistent networking and security to public clouds such as AWS and Azure1 VMware NSX Advanced Load Balancer: A solution that provides load balancing, web application firewall, analytics, and monitoring for applications across any cloud12 VMware NSX Distributed IDS/IPS: A feature that provides distributed intrusion detection and prevention for workloads across any cloud12 VMware NSX Intelligence: A service that provides planning, observability, and intelligence for network and micro-segmentation1 VMware NSX Federation: A capability that enables multi-site networking and security management with consistent policy and operational state synchronization1 VMware NSX Service Mesh: A service that connects, secures, and monitors microservices across multiple clusters and clouds1 VMware NSX for Horizon: A solution that delivers secure desktops and applications across any device, location, or network1 VMware NSX for vSphere: A solution that provides network agility and security for vSphere environments with a built-in console in vCenter1 VMware NSX-T Data Center: A platform for cloud-native applications that supports containers, Kubernetes, bare metal hosts, and multi-hypervisor environments1 VMware Tanzu Kubernetes Grid and VMware Tanzu Kubernetes Cluster are not part of the VMware NSX portfolio. They are solutions for running Kubernetes clusters on any cloud3 VMware Aria Automation is not a real product name. It is a fictional name that does not exist in the VMware portfolio. https://blogs.vmware.com/networkvirtualization/2020/01/nsx-hero.html/

An administrator wants to validate the BGP connection status between the Tier-0 Gateway and the upstream physical router.What sequence of commands could be used to check this status on NSX Edge node?