Free VMware 2V0-41.24 Practice Questions & Answers 2026 Part2

Question #1

An NSX administrator wants to create a Tier-0 Gateway to support equal cost multi-path (ECMP) routing.Which failover detection protocol must be used to meet this requirement?

A. Host Standby Router Protocol (HSRP)

B. Beacon Probing (BP)

C. Virtual Router Redundancy Protocol (VRRP)

D. Bidirectional Forwarding Detection (BFD)

View answer

Correct Answer: D

Question #2

Refer to the exhibit.A security administrator has configured a gateway firewall rule to block traffic to all Web servers. What can the administrator infer about the rule publication after reviewing the log extract?

A. The user has no permission to create gateway firewall rules

B. The rule has been successfully realized in the NSX Manager

C. The rule has been successfully realized in the data path

D. There was a communication problem with the Central Control Plane

View answer

Correct Answer: AB

Question #3

Which of the following exist only on Tler-1 Gateway firewall configurations and not on Tier-0?

A. Applied To

B. Actions

C. Profiles

D. Sources

View answer

Correct Answer: C

Question #4

An NSX administrator wants to create a Tier-0 Gateway to support equal cost multi-path (ECMP) routing.Which failover detection protocol must be used to meet this requirement?

A. Host Standby Router Protocol (HSRP)

B. Beacon Probing (BP)

C. Virtual Router Redundancy Protocol (VRRP)

D. Bidirectional Forwarding Detection (BFD)

View answer

Correct Answer: D

Question #5

Which three selections are capabilities of Network Topology? (Choose three.)

A. Display how the different NSX components are interconnected

B. Display the VMs connected to Segments

C. Display how the Physical components are interconnected

D. Display the uplinks configured on the Tier - 1 Gateways

E. Display the uplinks configured on the Tier - 0 Gateways

View answer

Correct Answer: ABC

Question #6

Which three security features are dependent on the NSX Application Platform? (Choose three.)

A. NSX Intelligence

B. NSX Firewall

C. NSX Network Detection and Response

D. NSX TLS Inspection

E. NSX Distributed IDS/IPS

F. NSX Malware Prevention

View answer

Correct Answer: ACF

Question #7

An NSX administrator would like to export syslog events that capture messages related to NSX host preparation events.Which message ID (msgid) should be used in the syslog export configuration command as a filter?

A. FABRIC

B. SYSTEM

C. GROUPING

D. MONITORING

View answer

Correct Answer: A

Question #8

Which three protocols could an NSX administrator use to transfer log messages to a remote log server? (Choose three.)

A. HTTPS

B. SSH

C. TCP

D. UDP

E. SSL

F. TLS

View answer

Correct Answer: CDF

Question #9

An NSX administrator wants to create a Tier-0 Gateway to support equal cost multi-path (ECMP) routing.Which failover detection protocol must be used to meet this requirement?

A. Host Standby Router Protocol (HSRP)

B. Beacon Probing (BP)

C. Virtual Router Redundancy Protocol (VRRP)

D. Bidirectional Forwarding Detection (BFD)

View answer

Correct Answer: D

Question #10

In an NSX environment, an administrator is observing low throughput and congestion between the Tier-0 Gateway and the upstream physical routers.Which two actions could address low throughput and congestion? (Choose two.)

A. Configure ECMP on the Tier-0 gateway

B. Configure a Tier-1 gateway and connect it directly to the physical routers

C. Deploy Large size Edge node/s

D. Configure NAT on the Tier-0 gateway

E. Add an additional vNIC to the NSX Edge node

View answer

Correct Answer: AC

Question #11

What is VMware's recommendation for the minimum MTU requirements when planning an NSX deployment?

A. MTU should be set to 1700 or greater across the data center network including inter-data center connections

B. MTU should be set to 1500 or less only on inter-data center connections

C. Configure Path MTU Discovery and rely on fragmentation

D. MTU should be set to 1550 or less across the data center network including inter-data center connections

View answer

Correct Answer: A

Question #12

In which VPN type are the Virtual Tunnel interfaces (VTI) used?

A. SSL-based VPN

B. Route & SSL based VPNs

C. Policy & Route based VPNs

D. Route-based VPN

View answer

Correct Answer: D

Question #13

As part of an organization’s IT security compliance requirement, NSX Manager must be configured for 2FA (two-factor authentication).What should an NSX administrator have ready before the integration can be configured?

A. Active Directory LDAP integration with ADFS

B. VMware Identity Manager with NSX added as a Web Application

C. VMware Identity Manager with an OAuth Client added

D. Active Directory LDAP integration with OAuth Client added

View answer

Correct Answer: B

Question #14

What is the VMware recommended way to deploy a virtual NSX Edge Node?

A. Through the NSX UI

B. Through automated or interactive mode using an ISO

C. Through the vSphere Web Client

D. Through the OVF command line tool

View answer

Correct Answer: B

Question #15

An NSX administrator has deployed a single NSX Manager node and will be adding two additional nodes to form a 3-node NSX Management Cluster for a production environment. The administrator will deploy these two additional nodes and Cluster VIP using the NSX UI.What two are the prerequisites for this configuration? (Choose two.)

A. he cluster configuration must be completed using API

B. ll nodes must be in the same subnet

C. ll nodes must be in separate subnets

D. compute manager must be configured

E. SX Manager must reside on a Windows Server

View answer

Correct Answer: BD

Question #16

Which command is used to display the network configuration of the Tunnel Endpoint (TEP) IP on a bare metal transport node?

A. debug

B. tcpdump

C. tcpconfig

D. ifconfig

E. Reveal Answer

View answer

Correct Answer: D

Question #17

In an NSX environment, an administrator is observing low throughput and congestion between the Tier-0 Gateway and the upstream physical routers.Which two actions could address low throughput and congestion? (Choose two.)

A. Configure ECMP on the Tier-0 gateway

B. Configure a Tier-1 gateway and connect it directly to the physical routers

C. Deploy Large size Edge node/s

D. Configure NAT on the Tier-0 gateway

E. Add an additional vNIC to the NSX Edge node

View answer

Correct Answer: AC

Question #18

An administrator wants to validate the BGP connection status between the Tier-0 Gateway and the upstream physical router.

A. -enable -get vrf -show bgp neighbor

B. -get gateways -vrf -get bgp neighbor

C. -set vrf -show logical-routers -show bgp

D. -show logical-routers -get vrf -show ip route bgp

View answer

Correct Answer: A

Question #19

An NSX administrator would like to export syslog events that capture messages related to NSX host preparation events.Which message ID (msgid) should be used in the syslog export configuration command as a filter?

A. FABRIC

B. SYSTEM

C. GROUPING

D. MONITORING

View answer

Correct Answer: A

Question #20

Which two commands does an NSX administrator use to check the IP address of the VMkernel port for the Geneve protocol on the ESXi transport node? (Choose two.)

A. net-dvs

B. esxcfg-nics -l

C. esxcli network ip interface ipv4 get

D. esxcfg-vmknic -l

E. esxcli network nic list

View answer

Correct Answer: C

Question #21

What can the administrator use to identify overlay segments in an NSX environment if troubleshooting is required?

A. egment ID

B. MI ID

C. LANID

D. eneve ID

View answer

Correct Answer: B

Question #22

Which two commands does an NSX administrator use to check the IP address of the VMkernel port for the Geneve protocol on the ESXi transport node? (Choose two.)

A. net - dvs

B. esxcfg - nics - l

C. esxcli network ip interface ipv4 get

D. esxcfg - vmknic - l

E. esxcli network nic list

View answer

Correct Answer: C

Question #23

In an NSX environment, an administrator is observing low throughput and congestion between the Tier-0 Gateway and the upstream physical routers.Which two actions could address low throughput and congestion? (Choose two.)

A. Configure ECMP on the Tier-0 gateway

B. Configure a Tier-1 gateway and connect it directly to the physical routers

C. Deploy Large size Edge node/s

D. Configure NAT on the Tier-0 gateway

E. Add an additional vNIC to the NSX Edge node

View answer

Correct Answer: AC

Question #24

A company security policy requires all users to log into applications using a centralized authentication system. Which two authentication, authorization, and accounting (AAA) systems are available when integrating NSX with VMware Identity Manager? (Choose two.)

A. ARSA SecureID

B. BSecureDAP

C. CRADII 2

D. DLDAP and OpenLDAP based on Active Directory (AD)

E. EKeygen Enterprise

View answer

Correct Answer: AD

Question #25

Which three protocols could an NSX administrator use to transfer log messages to a remote log server?(Choose three.)

A. TCP

B. SSL

C. UDP

D. HTTPS

E. TLS

F. SSH

View answer

Correct Answer: ACE

Question #26

A company security policy requires all users to log into applications using a centralized authentication system.Which two authentication, authorization, and accounting (AAA) systems are available when integrating NSX with VMware Identity Manager? (Choose two.)

A. RSA SecureID

B. SecureDAP

C. RADII 2

D. LDAP and OpenLDAP based on Active Directory (AD)

E. Keygen Enterprise

View answer

Correct Answer: AD

Question #27

What are two functions of the Service Engines in NSX Advanced Load Balancer? (Choose two.)

A. AIt collects real-time analytics from application traffic flows

B. BIt stores the configuration and policies related to load-balancing services

C. CIt performs application load-balancing operations

D. DIt deploys web servers to perform load-balancing operations

E. EIt provides a user interface to perform configuration and management tasks

View answer

Correct Answer: AC

Question #28

A company security policy requires all users to log into applications using a centralized authentication system.Which two authentication, authorization, and accounting (AAA) systems are available when integrating NSX with VMware Identity Manager? (Choose two.)

A. RSA SecureID

B. SecureDAP

C. RADII 2

D. LDAP and OpenLDAP based on Active Directory (AD)

E. Keygen Enterprise

View answer

Correct Answer: AD

Question #29

An NSX administrator wants to create a Tier-0 Gateway to support equal cost multi-path (ECMP) routing.Which failover detection protocol must be used to meet this requirement?

A. Host Standby Router Protocol (HSRP)

B. Beacon Probing (BP)

C. Virtual Router Redundancy Protocol (VRRP)

D. Bidirectional Forwarding Detection (BFD)

View answer

Correct Answer: D

Question #30

An administrator is configuring service insertion for Network Introspection. Which two places can the Network Introspection be configured? (Choose two.)

A. Edge Node

B. Host pNIC

C. Tier-0 gateway

D. Tier-1 gateway

E. Partner SVM

F. Reveal Answer

View answer

Correct Answer: DE

Question #31

In an NSX environment, an administrator is observing low throughput and congestion between the Tier-0 Gateway and the upstream physical routers.Which two actions could address low throughput and congestion? (Choose two.)

A. Configure ECMP on the Tier-0 gateway

B. Configure a Tier-1 gateway and connect it directly to the physical routers

C. Deploy Large size Edge node/s

D. Configure NAT on the Tier-0 gateway

E. Add an additional vNIC to the NSX Edge node

View answer

Correct Answer: AC

Question #32

Which CLI command on NSX Manager and NSX Edge is used to change NTP settings?

A. set timezone

B. set ntp-server

C. get timezone

D. get time-server

View answer

Correct Answer: B

Question #33

An NSX administrator would like to export syslog events that capture messages related to NSX host preparation events.Which message ID (msgid) should be used in the syslog export configuration command as a filter?

A. FABRIC

B. SYSTEM

C. GROUPING

D. MONITORING

View answer

Correct Answer: A

Question #34

An administrator has deployed 10 Edge Transport Nodes in their NSX Environment, but has forgotten to specify an NTP server during the deployment.What is the efficient way to add an NTP server to all 10 Edge Transport Nodes?

A. Use a Node Profile

B. Use Transport Node Profile

C. Use the CLI on each Edge Node

D. Use a PowerCLI script

E. Reveal Answer

View answer

Correct Answer: B

Question #35

An NSX administrator would like to export syslog events that capture messages related to NSX host preparation events.Which message ID (msgid) should be used in the syslog export configuration command as a filter?

A. FABRIC

B. SYSTEM

C. GROUPING

D. MONITORING

View answer

Correct Answer: A

Question #36

When collecting support bundles through NSX Manager, which files should be excluded for potentially containing sensitive information?

A. Core Files

B. Controller Files

C. Audit Files

D. Management Files

View answer

Correct Answer: A

Question #37

An administrator wants to validate the BGP connection status between the Tier-0 Gateway and the upstream physical router.What sequence of commands could be used to check this status on NSX Edge node?

A. - enable - get vrf - show bgp neighbor

B. - get gateways- vrf - get bgp neighbor

C. - set vrf - show logical-routers- show bgp

D. - show logical-routers- get vrf- show ip route bgp

View answer

Correct Answer: A

Question #38

When configuring OSPF on Tier-0 Gateway, which three of the following must match in order to establish a neighbor relationship with an upstream router? (Choose three.)

A. Area ID

B. MTU of the Uplink C Naming convention

C. Address of the neighbor

D. Subnet mask

E. Protocol and Port

F. Reveal Answer

View answer

Correct Answer: ABE

Question #39

What is the VMware recommended way to deploy a virtual NSX Edge Node?

A. Through the NSX Ul

B. Through automated or interactive mode using an ISO

C. Through the vSphere Web Client

D. Through the OVF command line tool

View answer

Correct Answer: B

Question #40

In which VPN type are the Virtual Tunnel interfaces (VTI) used?

A. SSL-based VPN

B. Route & SSL based VPNs

C. Policy & Route based VPNs

D. Route-based VPN

View answer

Correct Answer: D

DON'T WANT TO MISS A THING?

Latest Cisco, PMP, AWS, CompTIA, Microsoft Materials on SALE
Get Now

Free VMware 2V0-41.24 Practice Questions & Answers 2026 Part2 | Network Virtualization

View The Updated Vmware Exam Questions

View Answers after Submission

DON'T WANT TO MISS A THING?

Latest Cisco, PMP, AWS, CompTIA, Microsoft Materials on SALE Get Now

Free VMware 2V0-41.24 Practice Questions & Answers 2026 Part2 | Network Virtualization

View The Updated Vmware Exam Questions

View Answers after Submission

Latest Cisco, PMP, AWS, CompTIA, Microsoft Materials on SALE
Get Now