Free Palo Alto Networks NGFW-Engineer Practice Questions & Answers 2026 Part2

Question #1

An NGFW engineer is configuring multiple Panorama-managed firewalls to start sending all logs to Strata Logging Service. The Strata Logging Service instance has been provisioned, the required device certificates have been installed, and Panorama and the firewalls have been successfully onboarded to Strata Logging Service.Which configuration task must be performed to start sending the logs to Strata Logging Service and continue forwarding them to the Panorama log collectors as well?

A. Modify all active Log Forwarding profiles to select the "Cloud Logging" option in each profile match list in the appropriate device groups

B. Enable the "Panorama/Cloud Logging" option in the Logging and Reporting Settings section under Device -- > Setup --> Management in the appropriate templates

C. Select the "Enable Duplicate Logging" option in the Cloud Logging section under Device --> Setup --> Management in the appropriate templates

D. Select the "Enable Cloud Logging" option in the Cloud Logging section under Device --> Setup --> Management in the appropriate templates

View answer

Correct Answer: D

Question #2

When configuring a Zone Protection profile, in which section (protection type) would an NGFW engineer configure options to protect against activities such as spoofed IP addresses and split handshake session establishment attempts?

A. Flood Protection

B. Protocol Protection

C. Packet-Based Attack Protection

D. Reconnaissance Protection

View answer

Correct Answer: B

Question #3

An enterprise uses GlobalProtect with both user- and machine-based certificate authentication and requires pre-logon, OCSP checks, and minimal user disruption. They manage multiple firewalls via Panorama and deploy domain-issued machine certificates via Group Policy.Which approach ensures continuous, secure connectivity and consistent policy enforcement?

A. se a wildcard certificate from a public CA, disable all revocation checks to reduce latency, and manage certificate renewals manually on each firewall

B. eploy self-signed certificates on each firewall, allow IP-based authentication to override certificate checks, and use default GlobalProtect settings for user / machine identification

C. istribute root and intermediate CAs via Panorama template, use distinct certificate profiles for user versus machine certs, reference an internal OCSP responder, and automate certificate deployment with Group Policy

D. onfigure a single certificate profile for both user and machine certificates

View answer

Correct Answer: C

Question #4

An NGFW engineer is configuring multiple Layer 2 interfaces on a Palo Alto Networks firewall, and all interfaces must be assigned to the same VLAN. During initial testing, it is reported that clients located behind the various interfaces cannot communicate with each other.Which action taken by the engineer will resolve this issue?

A. Configure each interface to belong to the same Layer 2 zone and enable IP routing between them

B. Assign each interface to the appropriate Layer 2 zone and configure a policy that allows traffic within the VLAN

C. Assign each interface to the appropriate Layer 2 zone and configure Security policies for interfaces not assigned to the same zone

D. Enable IP routing between the interfaces and configure a Security policy to allow traffic between interfaces within the VLAN

View answer

Correct Answer: B

Question #5

An NGFW engineer is configuring multiple Layer 2 interfaces on a Palo Alto Networks firewall, and all interfaces must be assigned to the same VLAN. During initial testing, it is reported that clients located behind the various interfaces cannot communicate with each other.Which action taken by the engineer will resolve this issue?

A. Configure each interface to belong to the same Layer 2 zone and enable IP routing between them

B. Assign each interface to the appropriate Layer 2 zone and configure a policy that allows traffic within the VLAN

C. Assign each interface to the appropriate Layer 2 zone and configure Security policies for interfaces not assigned to the same zone

D. Enable IP routing between the interfaces and configure a Security policy to allow traffic between interfaces within the VLAN

View answer

Correct Answer: B

Question #6

Which type of firewall resource can be assigned when configuring a new firewall virtual system (VSYS)?

A. ecurity profile limit

B. essions limit

C. emory

D. PU

View answer

Correct Answer: B

Question #7

In a Palo Alto Networks environment, GlobalProtect has been enabled using certificate-based authentication for both users and devices. To ensure proper validation of certificates, one or more certificate profiles are configured.What function do certificate profiles serve in this context?

A. They store private keys for users and devices, effectively allowing the firewall to issue or reissue certificates if the primary Certificate Authority (CA) becomes unavailable, providing a built-in fallback CA to maintain continuous certificate issuance and authentication

B. They define trust anchors (root / intermediate Certificate Authorities (CAs)), specify revocation checks (CRL/OCSP), and map certificate attributes (e

C. They allow the firewall to bypass certificate validation entirely, focusing only on username / password-based authentication

D. They provide a one-click mechanism to distribute certificates to all endpoints without relying on external enrollment methods

View answer

Correct Answer: B

Question #8

Which configuration in the LACP tab will enable pre-negotiation for an Aggregate Ethernet (AE) interface on a Palo Alto Networks high availability (HA) active/passive pair?

A. Set Transmission Rate to "fast

B. Set passive link state to "Auto

C. Set "Enable in HA Passive State

D. Set LACP mode to "Active

View answer

Correct Answer: C

Question #9

Which configuration in the LACP tab will enable pre-negotiation for an Aggregate Ethernet (AE) interface on a Palo Alto Networks high availability (HA) active/passive pair?

A. Set Transmission Rate to "fast

B. Set passive link state to "Auto

C. Set "Enable in HA Passive State

D. Set LACP mode to "Active

View answer

Correct Answer: C

Question #10

After an engineer configures an IPSec tunnel with a Cisco ASA, the Palo Alto Networks firewall generates system messages reporting the tunnel is failing to establish.Which of the following actions will resolve this issue?

A. Ensure that an active static or dynamic route exists for the VPN peer with next hop as the tunnel interface

B. Configure the Proxy IDs to match the Cisco ASA configuration

C. Check that IPSec is enabled in the management profile on the external interface

D. Validate the tunnel interface VLAN against the peer's configuration

View answer

Correct Answer: B

Question #11

Which two statements apply to configuring required security rules when setting up an IPSec tunnel between a Palo Alto Networks firewall and a third- party gateway? (Choose two.)

A. For incoming and outgoing traffic through the tunnel, creating separate rules for each direction is optional

B. The IKE negotiation and IPSec/ESP packets are allowed by default via the intrazone default allow policy

C. For incoming and outgoing traffic through the tunnel, separate rules must be created for each direction

D. The IKE negotiation and IPSec/ESP packets are denied by default via the interzone default deny policy

View answer

Correct Answer: AB

Question #12

In a Palo Alto Networks environment, GlobalProtect has been enabled using certificate-based authentication for both users and devices. To ensure proper validation of certificates, one or more certificate profiles are configured.What function do certificate profiles serve in this context?

A. They store private keys for users and devices, effectively allowing the firewall to issue or reissue certificates if the primary Certificate Authority (CA) becomes unavailable, providing a built-in fallback CA to maintain continuous certificate issuance and authentication

B. They define trust anchors (root / intermediate Certificate Authorities (CAs)), specify revocation checks (CRL/OCSP), and map certificate attributes (e

C. They allow the firewall to bypass certificate validation entirely, focusing only on username / password-based authentication

D. They provide a one-click mechanism to distribute certificates to all endpoints without relying on external enrollment methods

View answer

Correct Answer: B

Question #13

By default, which type of traffic is configured by service route configuration to use the management interface?

A. Security zone

B. IPSec tunnel

C. Virtual system (VSYS)

D. Autonomous Digital Experience Manager (ADEM)

View answer

Correct Answer: D

Question #14

To maintain security efficacy of its public cloud resources by using native tools, a company purchases Cloud NGFW credits to replicate the Panorama, PA-Series, and VM-Series devices used in physical data centers. Resources exist on AWS and Azure:The AWS deployment is architected with AWS Transit Gateway, to which all resources connectThe Azure deployment is architected with each application independently routing trafficThe engineer deploying Cloud NGFW in these two cloud environments must account for the following:Minimize changes to the two cloud environmentsScale to the demands of the applications while using the least amount of compute resourcesAllow the company to unify the Security policies across all protected areasWhich two implementations will meet these requirements? (Choose two.)

A. Deploy a VM-Series firewall in AWS in each VPC, create an IPSec tunnel between AWS and Azure, and manage the policy with Panorama

B. Deploy Cloud NGFW for Azure in vNET/s, update the vNET/s routing to path traffic through the deployed NGFWs, and manage the policy with Panorama

C. Deploy Cloud NGFW for Azure in vWAN, create a vWAN to route all appropriate traffic to the Cloud NGFW attached to the vWAN, and manage the policy with local rules

D. Deploy Cloud NGFW for AWS in a centralized Security VPC, update the Transit Gateway to route all appropriate traffic through the Security VPC, and manage the policy with Panorama

View answer

Correct Answer: BD

Question #15

Which configuration in the LACP tab will enable pre-negotiation for an Aggregate Ethernet (AE) interface on a Palo Alto Networks high availability (HA) active/passive pair?

A. Set Transmission Rate to "fast

B. Set passive link state to "Auto

C. Set "Enable in HA Passive State

D. Set LACP mode to "Active

View answer

Correct Answer: C

Question #16

When configuring a Zone Protection profile, in which section (protection type) would an NGFW engineer configure options to protect against activities such as spoofed IP addresses and split handshake session establishment attempts?

A. Flood Protection

B. Protocol Protection

C. Packet-Based Attack Protection

D. Reconnaissance Protection

View answer

Correct Answer: B

Question #17

What is the primary use case for the CN-Series NGFW?

A. ecuring traffic in and out of a public cloud VPC or VNet (north-south)

B. nforcing Security policies between pods in a Kubernetes environment (east-west)

C. rotecting mobile users and remote branch offices (east-west)

D. roviding security for physical data center perimeters (north-south)

View answer

Correct Answer: B

Question #18

After an engineer configures an IPSec tunnel with a Cisco ASA, the Palo Alto Networks firewall generates system messages reporting the tunnel is failing to establish.Which of the following actions will resolve this issue?

A. Ensure that an active static or dynamic route exists for the VPN peer with next hop as the tunnel interface

B. Configure the Proxy IDs to match the Cisco ASA configuration

C. Check that IPSec is enabled in the management profile on the external interface

D. Validate the tunnel interface VLAN against the peer's configuration

View answer

Correct Answer: B

Question #19

Which initial action is required to configure logical routers?

A. Changing the virtual router type from 'default' to 'advanced'

B. Activating an advanced routing subscription

C. Committing a new advanced routing software module

D. Checking 'advanced routing' in general settings

View answer

Correct Answer: D

Question #20

How does a Palo Alto Networks NGFW respond when the preemptive hold time is set to 0 minutes during configuration of route monitoring?

A. It does not accept the configuration

B. It accepts the configuration but throws a warning message

C. It removes the static route because 0 is a NULL value

D. It reinstalls the route into the routing information base (RIB) as soon as the path comes up

View answer

Correct Answer: D

Question #21

When configuring a Zone Protection profile, in which section (protection type) would an NGFW engineer configure options to protect against activities such as spoofed IP addresses and split handshake session establishment attempts?

A. Flood Protection

B. Protocol Protection

C. Packet-Based Attack Protection

D. Reconnaissance Protection

View answer

Correct Answer: B

Question #22

To maintain security efficacy of its public cloud resources by using native tools, a company purchases Cloud NGFW credits to replicate the Panorama, PA-Series, and VM-Series devices used in physical data centers. Resources exist on AWS and Azure:The AWS deployment is architected with AWS Transit Gateway, to which all resources connectThe Azure deployment is architected with each application independently routing trafficThe engineer deploying Cloud NGFW in these two cloud environments must account for the following:Minimize changes to the two cloud environmentsScale to the demands of the applications while using the least amount of compute resourcesAllow the company to unify the Security policies across all protected areasWhich two implementations will meet these requirements? (Choose two.)

A. eploy a VM-Series firewall in AWS in each VPC, create an IPSec tunnel between AWS and Azure, and manage the policy with Panorama

B. eploy Cloud NGFW for Azure in vNET/s, update the vNET/s routing to path traffic through the deployed NGFWs, and manage the policy with Panorama

C. eploy Cloud NGFW for Azure in vWAN, create a vWAN to route all appropriate traffic to the Cloud NGFW attached to the vWAN, and manage the policy with local rules

D. eploy Cloud NGFW for AWS in a centralized Security VPC, update the Transit Gateway to route all appropriate traffic through the Security VPC, and manage the policy with Panorama

View answer

Correct Answer: BD

Question #23

An NGFW engineer is configuring multiple Layer 2 interfaces on a Palo Alto Networks firewall, and all interfaces must be assigned to the same VLAN. During initial testing, it is reported that clients located behind the various interfaces cannot communicate with each other.Which action taken by the engineer will resolve this issue?

A. Configure each interface to belong to the same Layer 2 zone and enable IP routing between them

B. Assign each interface to the appropriate Layer 2 zone and configure a policy that allows traffic within the VLAN

C. Assign each interface to the appropriate Layer 2 zone and configure Security policies for interfaces not assigned to the same zone

D. Enable IP routing between the interfaces and configure a Security policy to allow traffic between interfaces within the VLAN

View answer

Correct Answer: B

Question #24

What is a result of enabling split tunneling in the GlobalProtect portal configuration with the "Both Network Traffic and DNS" option?

A. t specifies when the secondary DNS server is used for resolution to allow access to specific domains that are not managed by the VPN

B. t specifies which domains are resolved by the VPN-assigned DNS servers and which domains are resolved by the local DNS servers

C. t allows devices on a local network to access blocked websites by changing which DNS server resolves certain domain names

D. t allows users to access internal resources when connected locally and external resources when connected remotely using the same FQDN

View answer

Correct Answer: B

Question #25

By default, which type of traffic is configured by service route configuration to use the management interface?

A. Security zone

B. IPSec tunnel

C. Virtual system (VSYS)

D. Autonomous Digital Experience Manager (ADEM)

View answer

Correct Answer: D

Question #26

An NGFW engineer is configuring multiple Panorama-managed firewalls to start sending all logs to Strata Logging Service. The Strata Logging Service instance has been provisioned, the required device certificates have been installed, and Panorama and the firewalls have been successfully onboarded to Strata Logging Service.Which configuration task must be performed to start sending the logs to Strata Logging Service and continue forwarding them to the Panorama log collectors as well?

A. Modify all active Log Forwarding profiles to select the “Cloud Logging” option in each profile match list in the appropriate device groups

B. Enable the “Panorama/Cloud Logging” option in the Logging and Reporting Settings section under Device --> Setup --> Management in the appropriate templates

C. Select the “Enable Duplicate Logging” option in the Cloud Logging section under Device --> Setup --> Management in the appropriate templates

D. Select the “Enable Cloud Logging” option in the Cloud Logging section under Device --> Setup --> Management in the appropriate templates

View answer

Correct Answer: C

Question #27

When integrating Kubernetes with Palo Alto Networks NGFWs, what is used to secure traffic between microservices?

A. Service graph

B. Ansible automation modules

C. Panorama role-based access control (RBAC)

D. CN-Series firewalls

View answer

Correct Answer: D

Question #28

What are the phases of the Palo Alto Networks AI Runtime Security: Network Intercept solution?

A. Scanning, Isolation, Whitelisting, Logging

B. Discovery, Deployment, Detection, Prevention

C. Policy Generation, Discovery, Enforcement, Logging

D. Profiling, Policy Generation, Enforcement, Reporting

View answer

Correct Answer: B

Question #29

Which statement describes the role of Terraform in deploying Palo Alto Networks NGFWs?

A. It acts as a logging service for NGFW performance metrics

B. It orchestrates real - time traffic inspection for network segments

C. It provides Infrastructure - as - Code (IaC) to automate NGFW deployment

D. It manages threat intelligence data synchronization with NGFWs

View answer

Correct Answer: C

Question #30

Which two zone types are valid when configuring a new security zone? (Choose two.)

A. Tunnel

B. Intrazone

C. Internal

D. Virtual Wire

View answer

Correct Answer: AD

Question #31

During an upgrade to the routing infrastructure in a customer environment, the network administrator wants to implement Advanced Routing Engine (ARE) on a Palo Alto Networks firewall.Which firewall models support this configuration?

A. A-5280, PA-7080, PA-3250, VM-Series

B. A-455, VM-Series, PA-1410, PA-5450

C. A-3260, PA-5410, PA-850, PA-460

D. A-7050, PA-1420, VM-Series, CN-Series

View answer

Correct Answer: A

Question #32

An NGFW engineer is configuring multiple Layer 2 interfaces on a Palo Alto Networks firewall, and all interfaces must be assigned to the same VLAN. During initial testing, it is reported that clients located behind the various interfaces cannot communicate with each other.Which action taken by the engineer will resolve this issue?

A. Configure each interface to belong to the same Layer 2 zone and enable IP routing between them

B. Assign each interface to the appropriate Layer 2 zone and configure a policy that allows traffic within the VLAN

C. Assign each interface to the appropriate Layer 2 zone and configure Security policies for interfaces not assigned to the same zone

D. Enable IP routing between the interfaces and configure a Security policy to allow traffic between interfaces within the VLAN

View answer

Correct Answer: B

Question #33

In a Palo Alto Networks environment, GlobalProtect has been enabled using certificate-based authentication for both users and devices. To ensure proper validation of certificates, one or more certificate profiles are configured.What function do certificate profiles serve in this context?

A. They store private keys for users and devices, effectively allowing the firewall to issue or reissue certificates if the primary Certificate Authority (CA) becomes unavailable, providing a built-in fallback CA to maintain continuous certificate issuance and authentication

B. They define trust anchors (root / intermediate Certificate Authorities (CAs)), specify revocation checks (CRL/OCSP), and map certificate attributes (e

C. They allow the firewall to bypass certificate validation entirely, focusing only on username / password-based authentication

D. They provide a one-click mechanism to distribute certificates to all endpoints without relying on external enrollment methods

View answer

Correct Answer: B

Question #34

An NGFW engineer is configuring multiple Panorama-managed firewalls to start sending all logs to Strata Logging Service. The Strata Logging Service instance has been provisioned, the required device certificates have been installed, and Panorama and the firewalls have been successfully onboarded to Strata Logging Service.Which configuration task must be performed to start sending the logs to Strata Logging Service and continue forwarding them to the Panorama log collectors as well?

A. Modify all active Log Forwarding profiles to select the "Cloud Logging" option in each profile match list in the appropriate device groups

B. Enable the "Panorama/Cloud Logging" option in the Logging and Reporting Settings section under Device -- > Setup --> Management in the appropriate templates

C. Select the "Enable Duplicate Logging" option in the Cloud Logging section under Device --> Setup --> Management in the appropriate templates

D. Select the "Enable Cloud Logging" option in the Cloud Logging section under Device --> Setup --> Management in the appropriate templates

View answer

Correct Answer: D

Question #35

Which configuration in the LACP tab will enable pre-negotiation for an Aggregate Ethernet (AE) interface on a Palo Alto Networks high availability (HA) active/passive pair?

A. Set Transmission Rate to "fast

B. Set passive link state to "Auto

C. Set "Enable in HA Passive State

D. Set LACP mode to "Active

View answer

Correct Answer: C

Question #36

An administrator must perform several actions on a fleet of firewalls from a central Panorama instance. To maintain efficiency, the administrator wants to only perform actions that do not require switching context into each firewall's individual web interface.Which set of actions is available to the administrator directly from the Panorama UI?

A. Creating a new VLAN -Assigning an interface to the new VLANConfiguring a new DHCP server on the firewall

B. Modifying a pre-rule -Editing a shared service object -Creating a new certificate profile

C. Accessing the CLI -Restarting the device -Installing the latest content and software versions

D. Configuring a new IPSec tunnel -Modifying the IKE gateway -Changing the DNS server settings of the firewall

View answer

Correct Answer: B

Question #37

An NGFW engineer is configuring multiple Layer 2 interfaces on a Palo Alto Networks firewall, and all interfaces must be assigned to the same VLAN. During initial testing, it is reported that clients located behind the various interfaces cannot communicate with each other.Which action taken by the engineer will resolve this issue?

A. Configure each interface to belong to the same Layer 2 zone and enable IP routing between them

B. Assign each interface to the appropriate Layer 2 zone and configure a policy that allows traffic within the VLAN

C. Assign each interface to the appropriate Layer 2 zone and configure Security policies for interfaces not assigned to the same zone

D. Enable IP routing between the interfaces and configure a Security policy to allow traffic between interfaces within the VLAN

View answer

Correct Answer: B

Question #38

When integrating Kubernetes with Palo Alto Networks NGFWs, what is used to secure traffic between microservices?

A. Service graph

B. Ansible automation modules

C. Panorama role-based access control (RBAC)

D. CN-Series firewalls

View answer

Correct Answer: D

Question #39

During an upgrade to the routing infrastructure in a customer environment, the network administrator wants to implement Advanced Routing Engine (ARE) on a Palo Alto Networks firewall. Which firewall models support this configuration?

A. PA - 5280, PA - 7080, PA - 3250, VM - Series

B. PA - 455, VM - Series, PA - 1410, PA - 5450

C. PA - 3260, PA - 5410, PA - 850, PA - 460

D. PA - 7050, PA - 1420, VM - Series, CN - Series

View answer

Correct Answer: C

Question #40

How does a Palo Alto Networks NGFW respond when the preemptive hold time is set to 0 minutes during configuration of route monitoring?

A. It does not accept the configuration

B. It accepts the configuration but throws a warning message

C. It removes the static route because 0 is a NULL value

D. It reinstalls the route into the routing information base (RIB) as soon as the path comes up

View answer

Correct Answer: D

Question #41

Which configuration in the LACP tab will enable pre-negotiation for an Aggregate Ethernet (AE) interface on a Palo Alto Networks high availability (HA) active/passive pair?

A. Set Transmission Rate to "fast

B. Set passive link state to "Auto

C. Set "Enable in HA Passive State

D. Set LACP mode to "Active

View answer

Correct Answer: C

Question #42

An organization is securing its cloud workloads using the Palo Alto Networks platform. The goal is to use a fully managed firewall service that integrates with Panorama for consistent policy management. The solution must be scalable and require minimal changes to the existing routing fabric. * The AWS cloud uses a distributed architecture where each application virtual private cloud (VPC) routes internet traffic through its own internet gateway. * The Azure cloud is built around a Virtual WAN (vWAN) hub for centralized connectivity. Which two deployments meet these criteria? (Choose two.)

A. ANative cloud provider firewalls in both cloud environments and connected to Panorama for management

B. BCloud NGFW in each spoke VNet with User-Defined Routes (UDRs) to redirect traffic bypassing the vWAN hub

C. CCloud NGFW endpoints in each application VPC, updating the VPC route tables to direct traffic through the endpoints

D. DCloud NGFW as a security partner in the vWAN hub with routing configured to send traffic through the NGFW

View answer

Correct Answer: CD

Question #43

After an engineer configures an IPSec tunnel with a Cisco ASA, the Palo Alto Networks firewall generates system messages reporting the tunnel is failing to establish.Which of the following actions will resolve this issue?

A. Ensure that an active static or dynamic route exists for the VPN peer with next hop as the tunnel interface

B. Configure the Proxy IDs to match the Cisco ASA configuration

C. Check that IPSec is enabled in the management profile on the external interface

D. Validate the tunnel interface VLAN against the peer's configuration

View answer

Correct Answer: B

Question #44

When integrating Kubernetes with Palo Alto Networks NGFWs, what is used to secure traffic between microservices?

A. Service graph

B. Ansible automation modules

C. Panorama role-based access control (RBAC)

D. CN-Series firewalls

View answer

Correct Answer: D

Question #45

An NGFW engineer is configuring multiple Layer 2 interfaces on a Palo Alto Networks firewall, and all interfaces must be assigned to the same VLAN. During initial testing, it is reported that clients located behind the various interfaces cannot communicate with each other.Which action taken by the engineer will resolve this issue?

A. Configure each interface to belong to the same Layer 2 zone and enable IP routing between them

B. Assign each interface to the appropriate Layer 2 zone and configure a policy that allows traffic within the VLAN

C. Assign each interface to the appropriate Layer 2 zone and configure Security policies for interfaces not assigned to the same zone

D. Enable IP routing between the interfaces and configure a Security policy to allow traffic between interfaces within the VLAN

View answer

Correct Answer: B

Question #46

Which initial action is required to configure logical routers?

A. Changing the virtual router type from 'default' to 'advanced'

B. Activating an advanced routing subscription

C. Committing a new advanced routing software module

D. Checking 'advanced routing' in general settings

View answer

Correct Answer: D

Question #47

To maintain security efficacy of its public cloud resources by using native tools, a company purchases Cloud NGFW credits to replicate the Panorama, PA-Series, and VM-Series devices used in physical data centers. Resources exist on AWS and Azure:The AWS deployment is architected with AWS Transit Gateway, to which all resources connectThe Azure deployment is architected with each application independently routing trafficThe engineer deploying Cloud NGFW in these two cloud environments must account for the following:Minimize changes to the two cloud environmentsScale to the demands of the applications while using the least amount of compute resourcesAllow the company to unify the Security policies across all protected areasWhich two implementations will meet these requirements? (Choose two.)

A. eploy a VM-Series firewall in AWS in each VPC, create an IPSec tunnel between AWS and Azure, and manage the policy with Panorama

B. eploy Cloud NGFW for Azure in vNET/s, update the vNET/s routing to path traffic through the deployed NGFWs, and manage the policy with Panorama

C. eploy Cloud NGFW for Azure in vWAN, create a vWAN to route all appropriate traffic to the Cloud NGFW attached to the vWAN, and manage the policy with local rules

D. eploy Cloud NGFW for AWS in a centralized Security VPC, update the Transit Gateway to route all appropriate traffic through the Security VPC, and manage the policy with Panorama

View answer

Correct Answer: BD

Question #48

In a Palo Alto Networks environment, GlobalProtect has been enabled using certificate-based authentication for both users and devices. To ensure proper validation of certificates, one or more certificate profiles are configured.What function do certificate profiles serve in this context?

A. They store private keys for users and devices, effectively allowing the firewall to issue or reissue certificates if the primary Certificate Authority (CA) becomes unavailable, providing a built-in fallback CA to maintain continuous certificate issuance and authentication

B. They define trust anchors (root / intermediate Certificate Authorities (CAs)), specify revocation checks (CRL/OCSP), and map certificate attributes (e

C. They allow the firewall to bypass certificate validation entirely, focusing only on username / password-based authentication

D. They provide a one-click mechanism to distribute certificates to all endpoints without relying on external enrollment methods

View answer

Correct Answer: B

Question #49

An NGFW engineer is configuring multiple Layer 2 interfaces on a Palo Alto Networks firewall, and all interfaces must be assigned to the same VLAN. During initial testing, it is reported that clients located behind the various interfaces cannot communicate with each other.Which action taken by the engineer will resolve this issue?

A. Configure each interface to belong to the same Layer 2 zone and enable IP routing between them

B. Assign each interface to the appropriate Layer 2 zone and configure a policy that allows traffic within the VLAN

C. Assign each interface to the appropriate Layer 2 zone and configure Security policies for interfaces not assigned to the same zone

D. Enable IP routing between the interfaces and configure a Security policy to allow traffic between interfaces within the VLAN

View answer

Correct Answer: C

Question #50

To maintain security efficacy of its public cloud resources by using native tools, a company purchases Cloud NGFW credits to replicate the Panorama, PA - Series, and VM - Series devices used in physical data centers. Resources exist on AWS and Azure The AWS deployment is architected with AWS Transit Gateway, to which all resources connect The Azure deployment is architected with each application independently routing traffic The engineer deploying Cloud NGFW in these two cloud environments must account for the following Minimize changes to the two cloud environments Scale to the demands of the applications while using the least amount of compute resources Allow the company to unify the Security policies across all protected areas Which two implementations will meet these requirements? (Choose two.)

A. Deploy a VM - Series firewall in AWS in each VPC, create an IPSec tunnel between AWS and Azure, and manage the policy with Panorama

B. Deploy Cloud NGFW for Azure in vNET/s, update the vNET/s routing to path traffic through the deployed NGFWs, and manage the policy with Panorama

C. Deploy Cloud NGFW for Azure in vWAN, create a vWAN to route all appropriate traffic to the Cloud NGFW attached to the vWAN, and manage the policy with local rules

D. Deploy Cloud NGFW for AWS in a centralized Security VPC, update the Transit Gateway to route all appropriate traffic through the Security VPC, and manage the policy with Panorama

View answer

Correct Answer: BD

Question #51

During an upgrade to the routing infrastructure in a customer environment, the network administrator wants to implement Advanced Routing Engine (ARE) on a Palo Alto Networks firewall.Which firewall models support this configuration?

A. A-5280, PA-7080, PA-3250, VM-Series

B. A-455, VM-Series, PA-1410, PA-5450

C. A-3260, PA-5410, PA-850, PA-460

D. A-7050, PA-1420, VM-Series, CN-Series

View answer

Correct Answer: A

Question #52

When configuring a Zone Protection profile, in which section (protection type) would an NGFW engineer configure options to protect against activities such as spoofed IP addresses and split handshake session establishment attempts?

A. Flood Protection

B. Protocol Protection

C. Packet-Based Attack Protection

D. Reconnaissance Protection

View answer

Correct Answer: B

Question #53

A firewall administrator uses Panorama to manage a fleet of firewalls. After successfully onboarding the firewalls to Strata Logging Service and enabling cloud logging via a template, the security operations team reports that they can no longer see new logs on the on-premises Panorama log collectors. Logs are appearing correctly in Strata Logging Service. Which setting was likely missed in the Panorama template configuration?

A. AThe device certificates for the Panorama log collectors were not renewed after enabling the cloud logging connection

B. BDuplicate logging (cloud and on-premises) is disabled under Device --> Setup --> Management

C. CThe Log Forwarding profile was modified to send logs only to the Strata Logging Service and no longer includes the on-premises Panorama log collectors

D. DThe Panorama log collectors were not defined as primary destinations within the collector group configuration for the managed firewalls

View answer

Correct Answer: B

Question #54

Which configuration in the LACP tab will enable pre-negotiation for an Aggregate Ethernet (AE) interface on a Palo Alto Networks high availability (HA) active/passive pair?

A. Set Transmission Rate to "fast

B. Set passive link state to "Auto

C. Set "Enable in HA Passive State

D. Set LACP mode to "Active

View answer

Correct Answer: C

Question #55

Which statement describes the role of Terraform in deploying Palo Alto Networks NGFWs?

A. t acts as a logging service for NGFW performance metrics

B. t orchestrates real-time traffic inspection for network segments

C. t provides Infrastructure-as-Code (IaC) to automate NGFW deployment

D. t manages threat intelligence data synchronization with NGFWs

View answer

Correct Answer: C

Question #56

To comply with new directives mandating the use of quantum-resistant cryptography for all data-in-transit a network engineer is tasked with reconfiguring existing IKEv2 VPN tunnels between PA-Series firewalls to meet this requirement. Which two actions should the engineer take to ensure compliance? (Choose two.)

A. AConfigure an IKE Crypto profile with one or more post-quantum rounds selected and apply it to an IKE Gateway configured for the post-quantum key exchange mechanism

B. BEstablish a shared secret of at least 64 characters and configure it as a post-quantum pre-shared key (PPK) within an IKEv2-only IKE Gateway

C. CGenerate a post-quantum pre-shared key (PPK) and apply it within the IPSec tunnel configuration's advanced settings

D. DEnable GlobalProtect with quantum-resistant tunneling and apply the profile to the IKE Gateway

View answer

Correct Answer: AB

Question #57

Which two zone types are valid when configuring a new security zone? (Choose two.)

A. Tunnel

B. Intrazone

C. Internal

D. Virtual Wire

View answer

Correct Answer: AD

Question #58

In regard to the Advanced Routing Engine (ARE), what must be enabled first when configuring a logical router on a PAN-OS firewall?

A. License

B. Plugin

C. Content update

D. General setting

View answer

Correct Answer: D

Question #59

After an engineer configures an IPSec tunnel with a Cisco ASA, the Palo Alto Networks firewall generates system messages reporting the tunnel is failing to establish.Which of the following actions will resolve this issue?

A. Ensure that an active static or dynamic route exists for the VPN peer with next hop as the tunnel interface

B. Configure the Proxy IDs to match the Cisco ASA configuration

C. Check that IPSec is enabled in the management profile on the external interface

D. Validate the tunnel interface VLAN against the peer's configuration

View answer

Correct Answer: B

Question #60

Which interface types should be used to configure link monitoring for a high availability (HA) deployment on a Palo Alto Networks NGFW?

A. HA, Virtual Wire, and Layer 2

B. Tap, Virtual Wire, and Layer 3

C. Virtual Wire, Layer 2, and Layer 3

D. HA, Layer 2

View answer

Correct Answer: C

DON'T WANT TO MISS A THING?

Latest Cisco, PMP, AWS, CompTIA, Microsoft Materials on SALE
Get Now

Free Palo Alto Networks NGFW-Engineer Practice Questions & Answers 2026 Part2

View Answers after Submission

DON'T WANT TO MISS A THING?

Latest Cisco, PMP, AWS, CompTIA, Microsoft Materials on SALE Get Now

Free Palo Alto Networks NGFW-Engineer Practice Questions & Answers 2026 Part2

View Answers after Submission

Latest Cisco, PMP, AWS, CompTIA, Microsoft Materials on SALE
Get Now