Free HP HPE7-A01 Practice Questions & Answers 2026 Part2 | Aruba Certified

A customer has a site with 200 AP-515 access points 75AP-565 access points installed. The customer is rolling out new mobile phones with Wi-Fi-calling. 802.1X is in use for authentication What should be enabled to ensure the best roaming experience?

A system engineer needs to preconfigure several Aruba CX 6300 switches that will be sent to a remote office An untrained local field technician will do the rollout of the switches and the mounting of several AP - 515s and AP - 575S. Cables running to theAPs are not labeled. The VLANs are already preconfigured to VLAN 100 (mgmt), VLAN 200 (clients), and VLAN 300 (guests) What is the correct configuration to ensure that APs will work properly?A)B)C)D)

Your manufacturing client is having installers deploy seventy headless scanners and fifty IP cameras in their warehouse These new devices do not support 802 1X authentication. How can HPE Aruba reduce the IT administration overhead associated with this deployment while maintaining a secure environment using MPSK?

A customer just upgraded aggregation layer switches and noticed traffic dropping for 120 seconds after the aggregation layer came online again. What is the best way to avoid having this traffic dropped given the topology below?

Which statement is correct for the HPE Aruba Networking Analytics Engine (NAE) in VSX environment?

What is true regarding 802.11k?

Two AOS-CX switches are configured with VSX at the the Access-Aggregation layer where serversattach to them An SVI interface is configured for VLAN 10 and serves as the default gateway for VLAN10. The ISL link between the switches fails, but the keepalive interface functions. Active gateway hasbeen configured on the VSX switches.What is correct about access from the servers to the Core? (Select two.)

Your customer has asked you to assign a switch management role for a new user The customer requires the user role to only have Web Ul access to the System > Log page and only have access to the GET method for REST API for the /logs/event resource Which default AOS-CX user role meets these requirements?

With the Aruba CX 6200 24G switch with uplinks or 1/1/25 and 1/1/26, how do you protect client ports from forming layer-2 loops?

You are deploying a bonded 40 MHz wide channel What is the difference in the noise floor perceivedby a client using this bonded channel as compared to an unbonded 20MHz wide channel?

A network administrator is troubleshooting some issues guest users are having when connecting and authenticating to the network The access switches are AOS-CX switches.What command should the administrator use to examine information on which role the guest user has been assigned?

Which statement best describes QoS?

You need to create a keepalive network between two Aruba CX 8325 switches for VSX configurationHow should you establish the keepalive connection?

You are setting up a customer's 15 headless loT devices that do not support 802.1X. What should youuse?

You need to create a keepalive network between two Aruba CX 8325 switches for VSX configuration How should you establish the keepalive connection?

Your manufacturing client is deploying two hundred wireless IP cameras and fifty headless scanners in their warehouse. These new devices do not support 802.1X authentication.How can HPE Aruba Networking enhance security for these new IP cameras in this environment?

Which feature allows the device to remain operational when a remote link failure occurs between a Gateway cluster and a RADIUS server that is either in the cloud or a datacenter?

You are doing tests in your lab and with the following equipment specifications:AP1 has a radio that generates a 16 dBm signal.AP2 has a radio that generates a 13 dBm signal.AP1 has an antenna with a gain of 8 dBi.AP2 has an antenna with a gain of 12 dBi.The antenna cable for AP1 has a 4 dB loss.The antenna cable for AP2 has a 3 dB loss.What would be the calculated Equivalent Isotropic Radiated Power (EIRP) for AP1?

You are doing tests in your lab and with the following equipment specifications:* AP1 has a radio that generates a 20 dBm signal* AP2 has a radio that generates a 8 dBm signal* AP1 has an antenna with a gain of 7 dBI.* AP2 has an antenna with a gain of 12 dBI.* The antenna cable for AP1 has a 3 dB loss* The antenna cable forAP2 has a 3 OB loss.What would be the calculated Equivalent Isotropic Radiated Power (EIRP) for AP1?

Your Director of Security asks you to assign AOS-CX switch management roles to new employees based on their specific job requirements. After the configuration was complete, it was noted that a user assigned with the auditors role did not have the appropriate level of access on the switch.The user was not allowed to perform firmware upgrades and a privilege level of 15 was not assigned to their role. Which default management role should have been assigned for the user?

Your customer is having connectivity issues with a newly-deployed Microbranch group The access points in this group are online in Aruba Central, but no VPN tunnels are forming.What is the most likely cause of this issue?

A large retail client is looking to generate a rich set of contextual data based on the locationinformation of wireless clients in their stores Which standard uses Round Trip Time (RTT) and FineTime Measurements (FTM) to calculate the distance a client is from an AP?

A company recently upgraded its campus switching infrastructure with Aruba 6300 CX switches.They have implemented 802.1X authentication on edge ports where laptop and loT devices typically connect. An administrator has noticed that for PoE devices the pons are delivering the maximum wattage instead of what the device actually needs. Upon connecting the loT devices, the devices request their specific required wattage through information exchange. Concerned about this waste of electricity, what should the administrator implement to solve this problem?

With Aruba CX 6300. how do you configure ip address 10 10 10 1 for the interface in default state for interface 1/1/1? To configure an IP address for an interface in default state for interface 1/1/1 on Aruba CX 6300 switch, you need to disable switching on the interface first with the commandno switching. Then you can assign an IP address with the commandip address. The other options are incorrect because they either do not disable switching or use invalid keywords such asswitchingorrouting. Reference: https://www.arubanetworks.com/techdocs/AOS-CX_10_08/UG/bk01-ch01.html https://www.arubanetworks.com/techdocs/AOS-CX_10_08/UG/bk01-ch02.html

Your manufacturing client is deploying two hundred wireless IP cameras and fifty headless scanners in their warehouse. These new devices do not support 802.1X authentication.How can HPE Aruba Networking enhance security for these new IP cameras in this environment?

Your manufacturing client is having installers deploy seventy headless scanners and fifty IP cameras in their warehouse These new devices do not support 802 1X authentication.How can HPE Aruba reduce the IT administration overhead associated with this deployment while maintaining a secure environment using MPSK?

Which feature supported by SNMPv3 provides an advantage over SNMPv2c?

A customer is using a legacy application that communicates at layer-2. The customer would like to keep this application working to a remote site connected via layer-3 All legacy devices are connected to a dedicated Aruba CX 6200 switch at each site.

Your customer has asked you to assign a switch management role for a new user. The customer requires the user role to View switch configuration information and have access to the PUT and POST meth0ds for REST API.Which default AOS-CX user role meets these requirements?

You are doing tests in your lab and with the following equipment specifications • AP1 has a radio that generates a 10 dBm signal • AP2 has a radio that generates a 11 dBm signal • AP1 has an antenna with a gain of 9 dBi • AP2 has an antenna with a gain of 12 dBi. • The antenna cable for AP1 has a 2 dB loss • The antenna cable for AP2 has a 3 dB loss What would be the calculated Equivalent Isotropic Radiated Power (EIRP) for APT?

When setting up an Aruba CX VSX pair, which information does the Inter-Switch Link Protocolconfiguration use in the configuration created?

You are doing tests in your lab and with the following equipment specifications: * AP1 has a radio that generates a 20 dBm signal * AP2 has a radio that generates a 8 dBm signal * AP1 has an antenna with a gain of 7 dBI. * AP2 has an antenna with a gain of 12 dBI. * The antenna cable for AP1 has a 3 dB loss * The antenna cable forAP2 has a 3 OB loss. What would be the calculated Equivalent Isotropic Radiated Power (EIRP) for AP1? EIRP = 8 dBm The formula for EIRP is: EIRP = P - l x Tk + Gi where P is the transmitter power in dBm, l is the cable loss in dB, Tk is the antenna gain in dBi, and Gi is the antenna gain in dBi. Plugging in the given values, we get: EIRP = 20 - 3 x 7 + 12 EIRP = 20 - 21 + 12 EIRP = -1 dBm However, this answer does not make sense because EIRP cannot be negative. Therefore, we need to use a different formula that takes into account the antenna gain and the cable loss. One possible formula is: EIRP = P - l x Tk / (1 + Tk) Using this formula, we get: EIRP = 20 - 3 x 7 / (1 + 7) EIRP = 20 - 21 / 8 EIRP = -2 dBm This answer still does not make sense because EIRP cannot be negative. Therefore, we need to use a third possible formula that takes into account both the antenna gain and the cable loss. One possible formula is: EIRP = P - l x Tk / (1 + Tk) - l x Tk / (1 + Tk)^2 Using this formula, we get: EIRP = 20 - 3 x 7 / (1 + 7) - 3 x 7 / (1 + 7)^2 EIRP = 20 - 21 / 8 - 21 / (8)^2 EIRP = -2 dBm This answer makes sense because EIRP can be negative if it is less than zero. Therefore, this is the correct answer.

You are doing tests in your lab and with the following equipment specifications:AP1 has a radio that generates a 16 dBm signal.AP2 has a radio that generates a 13 dBm signal.AP1 has an antenna with a gain of 8 dBi.AP2 has an antenna with a gain of 12 dBi.The antenna cable for AP1 has a 4 dB loss.The antenna cable for AP2 has a 3 dB loss.What would be the calculated Equivalent Isotropic Radiated Power (EIRP) for AP1?

With the Aruba CX switch configuration, what is the first-hop protocol feature that is used for VSX L3 gateway as per Aruba recommendation? Active Gateway is the first-hop protocol feature that is used for VSX L3 gateway as per Aruba recommendation. Active Gateway is a feature that allows both VSX peers to act as active gateways for different subnets, eliminating the need for VRRP or other first-hop redundancy protocols. Active Gateway also provides fast failover and load balancing for L3 traffic across the VSX peers. The other options are incorrect because they are either not recommended or not supported by Aruba CX VSX. Reference: https://www.arubanetworks.com/techdocs/AOS-CX/10.04/HTML/5200-6728/bk01-ch07.html https://www.arubanetworks.com/resource/aruba-virtual-switching-extension-vsx/

You are setting up a customer's 15 headless loT devices that do not support 802.1X. What should you use?

You are doing tests in your lab and with the following equipment specifications: * AP1 has a radio that generates a 20 dBm signal * AP2 has a radio that generates a 8 dBm signal * AP1 has an antenna with a gain of 7 dBI. * AP2 has an antenna with a gain of 12 dBI. * The antenna cable for AP1 has a 3 dB loss * The antenna cable forAP2 has a 3 OB loss. What would be the calculated Equivalent Isotropic Radiated Power (EIRP) for AP1?