DON'T WANT TO MISS A THING?

Certification Exam Passing Tips

Latest exam news and discount info

Curated and up-to-date by our experts

Yes, send me the newsletter

Free HP HPE6-A86 Practice Questions & Answers 2026 Part1 | Aruba Certified

Are you preparing for the Aruba HPE6-A86 certification exam? SPOTO offers the Aruba HPE6-A86 Premium File; all questions are aligned with the latest exam content and come with expert-provided answers. Our question banks cover the latest question types, core concepts, and detailed explanations, helping you familiarize yourself with the exam format and difficulty level. Whether you are reviewing core concepts or simulating a real exam environment, these resources will rapidly boost your confidence and readiness.
For over two decades, SPOTO has successfully helped numerous IT professionals secure their ideal positions at Fortune 500 companies. Download now to start practicing efficiently and ensure a high score on the actual exam. Don't miss this opportunity to pass your certification exam with ease!
Take other online exams
Question #1
You have access to the CLI of an HPE Aruba Networking CX switch.How can you output the switch make, model, and serial number displayed on the session?
A. Issue command:show support-information
B. Issue command:diag dump basic
C. Issue command:show configuration
D. Issue command:show system
View answer
Correct Answer: D
Question #2
Which statement is true given the IP address 10.64.0.240 and subnet mask 255.255.254.0?
A. The network portion of the address is 10
B. There are more than 8 bits in the host portion
C. 10
D. The prefix length of the network is /25
View answer
Correct Answer: B
Question #3
A customer requires a network upgrade to replace their existing core switches. The new solution must support 100G speeds to the aggregation layer, with the ability to scale to a 12U chassis.
A. CX 6400
B. CX 10000
C. CX 9300
D. CX 8325
View answer
Correct Answer: A
Question #4
A newly connected 500R series access point is not visible in HPE Aruba Networking Central. You have run the following commands to troubleshoot.Based on the output, what could be the problem?
A. The AP does not support DHCP
B. The DHCP server is not available
C. The DHCP server must be in the same subnet as the AP
D. The switch port should be configured as an access port
View answer
Correct Answer: B
Question #5
A technician installed a new 550 series access point, which is cabled back to a CX 6000 series switch. However, there are no lights on the AP.What could cause this?
A. STP has not been configured
B. PoE is disabled on the interface
C. The AP can’t connect to HPE Aruba Networking Central
D. The wrong VLAN has been configured
View answer
Correct Answer: B
Question #6
How do you configure an IP address for the management interface on a CX 6300?
A. nterface mgmtno shutdownip static 10
B. nterface mgmtno shutdownip address 10
C. nterface mgmtno shutdownip address 10
D. rf mgmt!interface mgmtno shutdownip static 10
View answer
Correct Answer: A
Question #7
Which statement is true when creating VLANs on an HPE Aruba Networking CX switch?
A. A VLAN range can be created with a syntax of:vlan 100:110
B. A VLAN range can be created with a syntax of:vlan 100-110
C. A newly created VLAN needs to be enabled with a command:vlan 100enable
D. A newly created VLAN needs to be enabled with a command:vlan 100no shutdown
View answer
Correct Answer: B
Question #8
After testing a new HPE Aruba Networking 6200M switch deployment for a small office, you discovered that hosts in different VLANs cannot reach each other.
A. Configure an SVI for each VLAN
B. Enable IP forwarding on the switch
C. Trunk the VLANs to a Layer 2 switch
D. Enable inter-VLAN bridging
View answer
Correct Answer: A
Question #9
Which commands can ensure the current configuration persists after a reboot? (Choose two.)
A. commit confirm
B. write memory
C. save force
D. copy startup-config running-config
E. copy running-config startup-config
View answer
Correct Answer: BE
Question #10
Which user group exists by default on a CX 8400 series switch?
A. perators
B. elpdesk
C. ervicedesk
D. upport
View answer
Correct Answer: A
Question #11
A customer is about to connect a new CX 6200 switch using ports 1/1/47 and 1/1/48 to an existing 5406R in a VSF configuration. The VSF is already configured with the following settings:trunk 1/A24, 2/A24 trk2trk2vlan tagged 100,200,300vlan untagged 50What needs to be configured on the new CX 6200 switch?
A. interface lag 27vlan trunk allowed 50,100,200,300vlan trunk native 50!
B. interface lag 27lacp mode staticvlan trunk allowed 50,100,200,300vlan trunk native untagged 50!
C. interface lag 27lacp mode staticvlan trunk allowed 50,100,200,300vlan trunk native tagged 50!
D. interface lag 27vlan trunk allowed 100,200,300vlan trunk native 50!
View answer
Correct Answer: A
Question #12
What is considered a secure protocol?
A. TTP
B. elnet
C. NMPv3
D. FTP
View answer
Correct Answer: C
Question #13
You are trying to configure VSF on a pair of HPE Aruba Networking CX 8100 Series switches.
A. VSF ports must be physically connected first
B. CX 8100 Series switches do not support VSF
C. VSF must be enabled globally on both switches first
D. Both switches require a firmware update
View answer
Correct Answer: B
Question #14
When explaining the HPE Aruba Networking Virtual Switching features, which statement about VSX is true?
A. he configuration can vary between two and ten members
B. he management plane is shared
C. he switch member ID changes on members other than the primary
D. he switch control plane operates independently
View answer
Correct Answer: D
Question #15
What is considered a secure protocol?
A. HTTP
B. Telnet
C. SNMPv3
D. TFTP
View answer
Correct Answer: C
Question #16
What describes the use of the Network Analytics Engine?
A. reates support events for the HPE Aruba Networking Support Portal
B. chedules automated backups of the switch config
C. utomatically creates tech support diagnostics in the event of a failure
D. utomates root cause analytics
View answer
Correct Answer: D
Question #17
Which statement is true when creating VLANs on an HPE Aruba Networking CX switch?
A. A VLAN range can be created with a syntax of: vlan 100:110
B. A VLAN range can be created with a syntax of: vlan 100-110
C. A newly created VLAN needs to be enabled with a command: vlan 100 enable
D. A newly created VLAN needs to be enabled with a command: vlan 100 no shutdown
View answer
Correct Answer: B
Question #18
An administrator wants remote management access to network devices using encrypted communications. Which protocol should be used?
A. SH
B. FTP
C. elnet
D. TP
View answer
Correct Answer: A
Question #19
Which firewall port needs to be opened between your Network Monitoring System and CX switches to collect monitoring data using SNMP?
A. UDP 161
B. UDP 1157
C. TCP 162
D. TCP 1156
View answer
Correct Answer: A
Question #20
Which is at the Transport Layer of the OSI model?
A. IP Address
B. TCP Port
C. MAC Address
D. Switch Port
View answer
Correct Answer: B
Question #21
How do you configure an IP address for the management interface on a CX 6300?
A. interface mgmtno shutdownip static 10
B. interface mgmtno shutdownip address 10
C. interface mgmtno shutdownip address 10
D. vrf mgmt!interface mgmtno shutdownip static 10
View answer
Correct Answer: A
Question #22
Which user group exists by default on a CX 8400 series switch?
A. operators
B. helpdesk
C. servicedesk
D. support
View answer
Correct Answer: A
Question #23
A technician installed a new 550 series access point, which is cabled back to a CX 6000 series switch. However, there are no lights on the AP.What could cause this?
A. TP has not been configured
B. oE is disabled on the interface
C. he AP can’t connect to HPE Aruba Networking Central
D. he wrong VLAN has been configured
View answer
Correct Answer: B
Question #24
Which transport protocol is most commonly used for an application that needs ordered delivery, retransmission, and session-oriented communication?
A. TCP
B. UDP
C. ARP
D. ICMP
View answer
Correct Answer: A
Question #25
You have configured the following on a Core-1 HPE Aruba Networking CX switch for primary and secondary ISP connectivity:
A. When uplink-failure-detection enables the 10
B. When the BFD session terminates on 10
C. When the default route graceful-restart timer expires
D. When 10
View answer
Correct Answer: D
Question #26
When multiple routes exist to the same destination, which would be installed in the routing table?
A. Default route
B. Static route
C. Lowest administrative distance
D. Highest administrative distance
View answer
Correct Answer: C
Question #27
A security auditor asks whether you use any insecure management protocols to configure your HPE Aruba Networking CX 6200 switches from their factory-default state.
A. No, Telnet and HTTPS are enabled by default
B. Yes, Telnet is enabled by default
C. No, SSH and HTTPS are enabled by default
D. Yes, HTTP is enabled by default
View answer
Correct Answer: C

View The Updated Aruba Exam Questions

SPOTO Provides 100% Real Aruba Exam Questions for You to Pass Your Aruba Exam!

Get Aruba Practice Test

View Answers after Submission

Please submit your email and WhatsApp to get the answers of questions.

Note: Please make sure your email ID and Whatsapp are valid so that you can get the correct exam results.

Email:
Whatsapp/phone number:
Contact Us


Copyright © 2024. Designer by SPOTO Official Website. All Rights Reserved.