Free HP HPE6-A85 Practice Questions & Answers 2026 Part3 | Aruba Certified

When using the OSFP dynamic routing protocol on an AOS-CX switch, what must match on the neighboring devices to exchange routes?

The noise floor measures 000000001 milliwatts, and the receiver's signal strength is -65dBm. What is the Signal to Noise Ratio?

You need to troubleshoot a CX 6200 4-node VSF stack switch that fails to boot correctly. Select the option that allows you to access the switch and see the boot options available for OS images and ServiceOS.

Describe the purpose of the administrative distance.

Which Aruba technology will allow for device-specific passphrases to securely add headless devices to the WLAN?

A network technician is using Aruba Central to troubleshoot network issues Which dashboard can be used to view and acknowledge issues when beginning the troubleshooting process? The Alerts and Events dashboard displays all types of alerts and events generated for events pertaining to device provisioning, configuration, and user management.You can use the Config icon to configure alerts and notifications for different alert categories and severities1.You can also view the alerts and events in the List view and Summary view2. Reference:1https://www.arubanetworks.com/techdocs/central/latest/content/nms/alerts/configuring-alerts.htm2https://www.arubanetworks.com/techdocs/central/latest/content/nms/alerts/viewing-alerts.htm

You need to ensure that voice traffic sent through an ArubaOS-CX switch arrives with minimal latency. What is the best scheduling technology to use for this task?

Based on the "snow ip route" output on an AruDaCX 8400. what type of route is "10.1 20 0/24, vrfdefault via 10.1.12.2. [1/0]"?

Two independent ArubaOS-CX 6300 switches with Spanning Tree (STP) settings are interconnectedwith two cables between ports 1/1/1 and 1/1/2 All four ports have "no shutdown" and "no routing"commandsHow will STP forward or discard traffic on these ports?

Describe the functionality of ARP.

What is indicated by a solid amber radio status LED on an HPE Aruba Networking AP?

After having configured the edge switch uplink as requested your colleague says that they have failed to ping the core You ask your colleague to verify the connection is plugged in and the switch is powered on They confirm that both are correct You attempt to ping the core switch and confirm that the ping is failing. Knowing the nature of this deployment, what commands might you use to troubleshoot this issued

Which authentication does Aruba's Captive Portal use?

A network technician has successfully connected to the employee SSID via 802 1X Which RADIUS message should you look for to ensure a successful connection?

What is the correct command to add a static route to a class-c-network 10.2.10.0 via a gateway of 172.16.1.1? The correct command to add a static route to a class-c-network 10.2.10.0 via a gateway of 172.16.1.1 is ip-route 10.2.10.0/24 172.16.1.1 . This command specifies the destination network address (10.2.10.0) and prefix length (/24) and the next-hop address (172.16.1 .1) for reaching that network from the switch. The other commands are either incorrect syntax or incorrect parameters for adding a static route. Reference: https://www.arubanetworks.com/techdocs/AOS-CX_10_04/NOSCG/Content/cx-noscg/ip-routing/static-routes.htm To add a static route in network devices, including Aruba switches, the correct command format generally includes the destination network, subnet mask (or CIDR notation for the mask), and the next-hop IP address. The command 'ip route 10.2.10.0/24 172.16.1.1' correctly specifies the destination network '10.2.10.0' with a class C subnet mask indicated by '/24', and '172.16.1.1' as the next-hop IP address. This command is succinct and follows the standard syntax for adding a static route in many network operating systems, including ArubaOS-CX. The other options either have incorrect syntax or include additional unnecessary parameters that are not typically part of the standard command to add a static route.

Describe the purpose of the administrative distance

How does a single Aruba CX 6300M switch configuration use L3 connectivity to establish routing traffic between switch virtual interfaces 120 and 130?

What does WPA3-Personal use as the source to generate a different Pairwise Master Key (PMK) each time a station connects to the wireless network?

What happens when the signal from an AP weakens by being absorbed as it moves through an object?

Review the configuration below. Why would you configure OSPF to use the IP address10.1.200.1 as the router ID?

A hospital uses a lot of mobile equipment for the diagnosis and documentation of patient data WhatIs the ideal access switch for this large hospital with distribution racks of over 400 ports in a singleVSF stack?

When using an Aruba standalone AP you select “Native VLAN” for the Client VLAN Assignment.In which subnet will the client IPs reside?

You need to troubleshoot a CX 6200 4-node VSF stack switch that fails to boot correctly. Select the option that allows you to access the switch and see the boot options available for OS images and ServiceOS.

A client connects to an Aruba AP in tunnel mode and is assigned to a VLAN based on the client's MAC address.Which client VLAN assignment was configured?

What does the status of “ALFOE” mean when checking LACP with “show lacp interfaces”?

Which part of the WPA Key Hierarchy is used to encrypt and/or decrypt data''

Describe the purpose of the administrative distance.

What is used by network devices to send error and operational information related to IP communications?

You are in a meeting with a customer where you are asked to explain the network redundancy feature Multiple Spanning Tree (MSTP). What is the correct statement for this feature?

Which type of device type and group persona is required to manage a Microbranch environment?