Free HP HPE6-A66 Practice Questions 2026 Part1 | Aruba Certified

A company has two buildings on a campus that are approximately 700 feet (214 meters) apart with aclear line of site. No fiber exists between the buildings; however, there is a need for connecting thenetworks in the buildings together. The connection between the two buildings will need to supportpeak rates over 1 Gbps.Which solution should the company choose that will meet their requirements as well as being cost-effective?

A network architect is creating a new wired design for a warehouse building. As a best practice, whatlength should the architect allow for the service loop in the wiring closets in this environment?

A network architect is given the task to design a new network solution for NewStellar Company, Inc.NewSteiiar has a main corporate campus in a business park with two adjacent buildings. Thenetwork architect has given one floor to analyze, Building 1 Floor 2, shown in the attached exhibit.Each building has three floors and each floor is 322 x 175 feet (98 x 53 meters) for 56,350 square feet(5,235 square meters) total, which results in a total of 338,100 feet (31,410 square meters) for theentire building space. Each floor has a central main corridor with washrooms, stairs, elevators andsupply and network cabinets. There are cubicles around the perimeter of the floor. The central partmain corridor's dimensions contain 9,350 square feet {870 square meters).Because of security concerns, video cameras will be installed throughout the facility. There are 16 ofthese per floor, 8 per wiring closet. The cameras are non-WiFi capable and require POE 802.3af-capable switch ports from which to draw power.A wireless capacity design is required. Assuming that wireless coverage is required across theBuilding 1, Floor 2, including the central area, and that half the required APs will connect to eachwiring closet, approximately how many POE+ ports will be required per wiring closet for all devicesthat have POE or POE+ needs?

A network architect wants to estimate the number of Aruba APs that will be needed Tor a new wireless design and determine the wireless coverage using VisualRF. The company requires a high- density design. The building has 200.000 square feet.

A customer requires a campus core virtualization solution that supports a dual control andmanagement planes, as well as active-active forwarding paths. Which solution would meet thecustomer's requirements?

A company is redesigning their wireless network and will be upgrading all devices to support thelatest wireless standards. The company is not near any radar installations. In order to keep wirelessNIC power levels as low as possible to reduce interference issues and to take advantage of radarfrequency ranges, what IEEE standard should APs support?

When determining a customer's agenda and clarifying their expectations for a new HPE/Aruba deployment, which two questions should be asked during the stakeholder checklist? (Select two.)

A company has two buildings on a campus, where each building has three floors, which two wiring closets per floor Assume that there will be 24 APs connected via POE+ to each wiring closet, along with 128 wired user connections.

A company needs an upgrade of its access layer switches. The solution requires that devicesconnected to the access layer by authenticated and their traffic processed by the firewall features ofthe Aruba Mobility Controllers. Which solution should the company implement?

Refer to the exhibit.When planning the use of Cat7 cabling for a SmartRate connection between an ArubaOS AP and anArubaOS switch, which sections should be considered when calculating distance?

A customer placed an order for an ArubaOS 5406R switch and plans to rack mount it in a wiring closet. The dimensions of the switch are 17.5 inches wide (44.45 cm), 6.9 inches high (17.5 cm), and 17.75 inches deep (45.1 cm). How many rack units should a customer plan for this switch?

A network architect is designing a wireless solution for a company that is leasing one floor in a multi - floor building in a downtown area. The customer is concerned about ensuring complete Wi - Fi coverage and pin - pointing RF hazards. What type of survey should the network architect perform?

A network architect is creating a new wired design for a warehouse building. As a best practice, what length should the architect allow for the service loop in the wiring closets in this environment?

Which must you perform in IRIS to assign a device to a Design Group?

A network architect imports a floorplan defined in a PNG file format What is the function of themeasurement tool in Aruba's VisualRF?

A network designer is documenting the number of physical sites for a customer that is within the scope of a redesign project. When determining the network purpose at each site, on what should the designer focus at each site? (Select two.)

A wiring closet with a POE+ switch is 250 feet (76 meters) away from an AP on a building floor. The AP's smart-rate port is connected to a smart-rate port on the switch, which is capable of 10 Gbps. The cable type is Cat5e STP. What is the maximum speed that the customer can expect from the connected AP?

A network architect is redesigning the access layer in a data center for a customer. The access layer requires fixed-port switches that support VSF and data center features like L2 VXLAN and REST-API. Which switching solution should the network architect recommend?

Which feature does the Aruba AP 387 support?

A network architect has created two sites in IRIS and defined network devices for each site. Fromwhich window would a network architect connect the two sites together?

A network architect plans to use two ArubaOS 5406 switches in a wiring closet configured in a VSF domain The VSF link requires a 40 GDps connection. Which SFP+ transceiver solutions would meet this requirement?

A university department has a program in video processing and editing. Students in the departmentuse Wi-Fi to interact with the video servers. The editing and processing is done by the studentsaccessing and using the video servers. However, the students must then stream their results, via Wi-Fi to their laptops to verify the results. A network architect has determined that no more than 20 APswill be needed for the Wi-Fi solution. Because of the large amount of bandwidth used during thestreaming, the Aruba mobility controller solution will need to support 10 Gbps links.Which solution would cost-effectively meet this customer's requirements?

When a WLAN has to support nomadic devices, a network architect must primarily plan for which component in their design?

A company has hired a network architect to replace an existing legacy wireless and wired network The building is one-story and contains four wiring closets Based on the information the network architect gathered from the company, one 48-port POE+ switch and three 48-port non-POE+ switches will be placed in each wiring closet. One stacking domain should be created for each wiring closet that supports 40 Gbps uplinks.Which stacking solution should the architect implement for the floor that meets the requirements and is the most cost-effective'?

Which two challenges do802.1ig barcode scanners present to a WLAN design? (Select two.)

A company needs to replace an existing legacy wireless and wired solution with one that supports features like 802 11 ax for APs and logical switching for switches. The company is located on a single floor with two wiring closets. Assume that there will be 10 APs connected via POE+ to each wiring closet, along with 36 wired user connections All switches on a floor should be configured in a single stack. The distance between wiring closets is 100 feet (31 meters).Which switching solution will minimally provide 10 Gbps uplinks at the most cost-effective price, while still meeting the company's requirements?

Which IRIS option will automatically create a project with a blank preconfigured Site-1 ?

A customer requires Aruba switches that support Smart Rate ports to connect to Aruba APs.

A network architect is designing a wireless solution for a company that is leasing one floor in a multi- floor building in a downtown area. The customer is concerned about ensuring complete Wi-Fi coverage and pin-pointing RF hazards. What type of survey should the network architect perform?

A network architect is creating a new wireless solution for a customer. Wireless coverage is required throughout all four floors of two buildings on the same campus. Dynamic RF capabilities, including AirMatch, are required. Seamless roaming is required within and between the two buildings. Each floor will have approximately 20 APs and 6 external APs are required for connectivity between the two buildings.