Free CompTIA SK0-005 Practice Questions & Answers 2026 Part3 | CompTIA Server+

Which of the following describes the installation of an OS contained entirely within another OS installation?

Which of the following BEST describes a security control that requires validating the user's physical characteristics?

Users at a company work with highly sensitive data. The security department implemented an administrative and technical control to enforce least-privilege access assigned to files. However, the security department has discovered unauthorized data exfiltration.Which of the following is the BEST way to protect the data from leaking?

Hosting data in different regional locations but not moving it for long periods of time describes:

Which of the following is typical of software licensing in the cloud?

Which of the following DR testing scenarios is described as verbally walking through each step of the DR plan in the context of a meeting?

Network connectivity to a server was lost when it was pulled from the rack during maintenance.Which of the following should the server administrator use to prevent this situation in the future?

Users in an office lost access to a file server following a short power outage. The server administrator noticed the server was powered off.Which of the following should the administrator do to prevent this situation in the future?

A technician is configuring a server that requires secure remote access.Which of the following ports should the technician use?

A technician is trying to determine the reason why a Linux server is not communicating on a network. The returned network configuration is as follows:

The management team at a healthcare organization is concerned about being able to access the dairy vital records if there is an IT disaster that causes both servers and the network lo be offline. Which of the following backup types can the organization use to mitigate this risk? A print backup is a type of backup that can be used to mitigate the risk of being unable to access the daily vital records if there is an IT disaster that causes both servers and the network to be offline. A print backup is a backup that involves printing out the data on paper and storing it in a secure location. A print backup can provide offline access to the data without relying on any hardware or software components that may be affected by the disaster. However, a print backup has some drawbacks such as high cost, low efficiency, low security, and environmental impact. A tape backup is a type of backup that involves storing the data on magnetic tape cartridges that can be accessed using a tape drive or a tape library. A tape backup can provide offline access to the data with high capacity, low cost, and long durability, but it requires special equipment and software that may not be available during a disaster. A cloud backup is a type of backup that involves storing the data on remote servers or platforms that can be accessed over the internet using a web browser or an application. A cloud backup can provide online access to the data with high scalability, flexibility, and security, but it requires network connectivity and bandwidth that may not be available during a disaster. A disk backup is a type of backup that involves storing the data on hard disk drives or solid state drives that can be accessed using a computer or a device. A disk backup can provide online or offline access to the data with high performance, reliability, and portability, but it requires compatible hardware and software that may not be available during a disaster. Reference: https://www.howtogeek.com/428483/what-is-end-to-end-encryption-and-why-does-it-matter/ https://www.howtogeek.com/443611/how-to-encrypt-your-macs-system-drive-removable-devices-and-individual-files/ https://www.howtogeek.com/199068/how-to-upgrade-your-existing-hard-drive-in-under-an-hour/https://www.howtogeek.com/202794/what-is-the-difference-between-127

Which of the following BEST describes the concept of right to downgrade?

Which of the following licenses would MOST likely include vendor assistance? Maintenance and support is a type of license that would most likely include vendor assistance. Maintenance and support is a contract that defines the level and scope of service and assistance that a vendor provides to a customer for using their software product. Maintenance and support may include technical support, bug fixes, patches, updates, upgrades, documentation, training, and other benefits. Maintenance and support licenses usually have an annual fee based on the number of users or devices covered by the contract. Open-source is a type of license that allows free access to the source code and modification and distribution of the software product, but does not guarantee vendor assistance. Version compatibility is not a type of license, but a feature that ensures software products can work with different versions of operating systems or other software products. Subscription is a type of license that allows access to software products for a limited period of time based on recurring payments, but does not necessarily include vendor assistance.Reference: https://www.techopedia.com/definition/1440/software-licensinghttps://www.techopedia.com/definition/1032/business-impact-analysis-bia

A server administrator is installing a new server that uses 40G0 network connectivity. The administrator needs to find the proper cables to connect the server to the switch. Which of the following connectors should the administrator use?

A technician runs top on a dual-core server and notes the following conditions:top ­- 14:32:27, 364 days, 14 users load average 60.5 12.4 13.6Which of the following actions should the administrator take?

A technician is preparing a deployment of servers to be used by staff at a remote location. Which of the following should the technician do to prevent access to the hardware configuration?

A server administrator mounted a new hard disk on a Linux system with a mount point of /newdisk. It was later determined that users were unable to create directories or files on the new mount point.Which of the following commands would successfully mount the drive with the required parameters?

A security analyst suspects a remote server is running vulnerable network applications. The analyst does not have administrative credentials for the server.Which of the following would MOST likely help the analyst determine if the applications are running?

Which of the following tools will analyze network logs in real time to report on suspicious log events?

A systems administrator is setting up a server on a LAN that uses an address space that follows the RFC 1918 standard. Which of the following IP addressesshould the administrator use to be in compliance with the standard?

Which of the following can be BEST described as the amount of time a company can afford to be down during recovery from an outage?

A server administrator is tasked with resolving an issue with the server's local storage. The administrator turns on the server and only two out of the four drives are found. After several reboots, an additional hard drive connects and disconnects randomly. Which of the following is most likely the cause?

Which of the following BEST describes the concept of right to downgrade?

A server administrator has been creating new VMs one by one. The administrator notices the system requirements are very similar, even with different applications.Which of the following would help the administrator accomplish this task in the SHORTEST amount of time and meet the system requirements?

A company has implemented a requirement to encrypt all the hard drives on its servers as part of a data loss prevention strategy.Which of the following should the company also perform as a data loss prevention method?

Following a recent power outage, a server in the datacenter has been constantly going offline and losing its configuration. Users have been experiencing access issues while using the application on the server. The server technician notices the date and time are incorrect when the server is online. All other servers are working.Which of the following would MOST likely cause this issue? (Choose two.)

A technician is installing a variety of servers in a rack. Which of the following is the BEST course ofaction for the technician to take while loading the rack?

Which of the following is typical of software licensing in the cloud?

A server technician notices a server is very low on disk space. Upon inspecting the disk utilization, the technician discovers server logs are taxing up a large amount of space. There is no central log server. Which of the following would help free up disk space?

A server technician has received reports of database update errors. The technician checks the server logs and determines the database is experiencing synchronization errors. To attempt to correct the errors, the technician should FIRST ensure:

A technician is connecting a Linux server to a share on a NAS.Which of the following is the MOST appropriate native protocol to use for this task?

A newly installed server is accessible to local users, but remote users are unable to connect. Which of the following is MOST likely misconfigured?

A systems administrator is setting up a server on a LAN that uses an address space that follows the RFC 1918 standard.Which of the following IP addresses should the administrator use to be in compliance with the standard?

Which of the following steps in the troubleshooting theory should be performed after a solution has been implemented? (Choose two.)

A snapshot is a feature that can be used in hypervisors to:

A systems administrator is performing maintenance on 12 Windows servers that are in different racks at a large datacenter.Which of the following would allow the administrator to perform maintenance on all 12 servers without having to physically be at each server? (Choose two.)

A server administrator is configuring the IP address on a newly provisioned server in the testing environment.The network VLANs are configured as follows:The administrator configures the IP address for the new server as follows:IP address: 192.168.1.1/24Default gateway: 192.168.10.1A ping sent to the default gateway is not successful.Which of the following IP address/default gateway combinations should the administrator have used for the new server?

A technician is configuring a server that requires secure remote access. Which of the following portsshould the technician use?

An administrator needs to perform bare-metal maintenance on a server in a remote datacenter. Which of the following should the administrator use to access the server's console?

Which of the following is an example of load balancing?

After configuring IP networking on a newly commissioned server, a server administrator installs a straight- through network cable from the patch panel to the switch. The administrator then returns to the server to test network connectivity using the ping command. The partial output of the ping and ipconfig commands are displayed below:The administrator returns to the switch and notices an amber link light on the port where the server is connected.Which of the following is the MOST likely reason for the lack of network connectivity?

A server that recently received hardware upgrades has begun to experience random BSOD conditions.Which of the following are likely causes of the issue? (Choose two.)

A user cannot save large files to a directory on a Linux server that was accepting smaller files a few minutes ago.Which of the following commands should a technician use to identify the issue?

Users in an office lost access to a file server following a short power outage. The server administrator noticed the server was powered off. Which of the following should the administrator do to prevent this situation in the future?

Which of the following server types would benefit MOST from the use of a load balancer?

Which of the following tools will analyze network logs in real time to report on suspicious log events?

A technician needs to install a Type 1 hypervisor on a server. The server has SD card slots, a SAS controller, and a SATA controller, and it is attached to a NAS. On which of the following drive types should the technician install the hypervisor?

An administrator is upgrading a group of legacy blade servers to the latest version of the hypervisor. After restarting the server, the upgrade is interrupted. The hypervisor is not available, and the update is not successful. Which of the following should the administrator do next to accomplish this upgrade?

Which of the following will correctly map a script to a home directory for a user based on username?

A server administrator needs to deploy five VMs, all of which must have the same type of configuration.Which of the following would be the MOST efficient way to perform this task?