DON'T WANT TO MISS A THING?

Certification Exam Passing Tips

Latest exam news and discount info

Curated and up-to-date by our experts

Yes, send me the newsletter

Free Cisco 350-501 SPCOR Practice Questions 2026 Part4

Are you preparing for the Cisco 350-501 certification exam? SPOTO offers the Cisco 350-501 Premium File; all questions are aligned with the latest exam content and come with expert-provided answers. Our question banks cover the latest question types, core concepts, and detailed explanations, helping you familiarize yourself with the exam format and difficulty level. Whether you are reviewing core concepts or simulating a real exam environment, these resources will rapidly boost your confidence and readiness.
For over two decades, SPOTO has successfully helped numerous IT professionals secure their ideal positions at Fortune 500 companies. Download now to start practicing efficiently and ensure a high score on the actual exam. Don't miss this opportunity to pass your certification exam with ease!
Take other online exams
Question #1
Refer to the exhibit. Which two topology changes happen to the IS-IS routers? (Choose two.)
A. R1 and R4 are Level 2 neighbors
B. All four routers are operating as Level 1-2 routers
C. All four routers are operating as Level 2 routers only
D. R1 and R2 are Level 2 neighbors
E. All four routers are operating as Level 1 routers only
View answer
Correct Answer: BD

View The Updated 350-501 Exam Questions

SPOTO Provides 100% Real 350-501 Exam Questions for You to Pass Your 350-501 Exam!

Contact Us Get 350-501 Practice Test
Question #2
A network engineer must enable the helper router to terminate the OSPF graceful restart process if it detects any changes in the LSA.Which command enables this feature?
A. nsf ietf helper disable
B. nsf cisco helper disable
C. nsf ietf helper strict-lsa-checking
D. nsf cisco enforce global
View answer
Correct Answer: C
Question #3
Refer to the exihibit.Refer to the exhibit. ISP A provides MPLS L3VPN service to customer A with BGP as the external routing protocol. Customer A has just opened a new branch office in London and requested the service provider to implement lossless service between its two offices. The LDP is enabled over the MPLS backbone and label exchange is working normally. Which action must the ISP engineering team take to enable the service?
A. Configure LDP and redistribute the route from EIGRP
B. Configure BGP address family VPNv4
C. Configure IGP and redistribute the route from BGP
D. Configure IGP LDP synchronization
View answer
Correct Answer: D
Question #4
Refer to the exhibit. A network engineer is implementing OSPF multiarea. Which command on interface G0/1 resolves adjacency issues in the new area?
A. ip ospf network point-to-point
B. ip ospf network broadcast
C. ip ospf network non-broadcast
D. ip ospf network point-to-multipoint
View answer
Correct Answer: A
Question #5
Which additional feature does MPLS DiffServ tunneling support?
A. matching EXP and DSCP values
B. PHB layer management
C. using GRE tunnels to hide markings
D. interaction between MPLS and IGP
View answer
Correct Answer: B
Question #6
Refer to the exihibit. Refer to the exhibit. All BGP peering in AS 65101 and 65201 is enabled. The operations team is told that traffic destined to 192.168.1.1/32 from R4 does not use the path R3-R2-R1 as expected. An engineer debugs the issue and determines that 192.168.1.1/32 is advertised in the BGP routing table on R1. Which action resolves the issue?
A. AEnable no synchronization on R2 m AS65101
B. BApply route-map High-LP out for prefix 192
C. CApply redistribute ospf 10 on R1 in BGP AS 65101
D. DConfigure network 192
View answer
Correct Answer: B
Question #7
What are two factors to consider when implementing NSR High Availability on an MPLS PE router? (Choose two.)
A. It requires all PE-CE sessions to support NSR
B. It requires routing protocol extensions
C. It consumes more memory and CPU resources than NSF
D. It operates normally without NSR support on the PE peers
E. It cannot sync state information across redundant RPs
View answer
Correct Answer: CD
Question #8
A remote operation center is deploying a set of I-BGP and E-BGP connections for multiple IOS-XR platforms using the same template. The I-BGP sessions exchange prefixes with no apparent issues, but the E-BGP sessions do not exchange routes. What causes this issue?
A. The I-BGP neighbors are mistyped and HELLO packets cannot be exchanged successfully between routers
B. The E-BGP neighbors are not allowed to exchange Information due to the customer platform's default policy
C. A PASS ALL policy has not been implemented for the I-BGP neighbors
D. The next-hop-self command is not implemented on both E-BGP neighbors
View answer
Correct Answer: B
Question #9
Refer to the exhibit:BGPsec is implemented on R1. R2. R3. and R4 BGP peering is established between neighboring autonomous systems Which statement about implementation is true?
A. BGP updates from the eBGP peers are appended with an additional AS path value that is statically set by the domain administrator
B. BGP updates from the iBGP peers are appended with a community of local-as
C. BGP updates from the all BGP peers are appended with a community of no export
D. BGP updates from the eBGP peers are appended with a BGPsec attribute sequence that includes a public key hash and digital signature
View answer
Correct Answer: D
Question #10
Refer to the exhibits. Which information is provided for traceback analysis when this configuration is applied?
A. source interface
B. packet size distribution
C. IP sub flow cache
D. BGP version
View answer
Correct Answer: A
Question #11
Which QoS model allows hosts to report their QoS needs to the network?
A. IntServ
B. CB-WFQ
C. DiffServ
D. MQC
View answer
Correct Answer: A
Question #12
Which configuration mode do you use to apply the mpls Idp graceful-restart command in IOS XE Software? MPLS
A. MPLS
B. LDP neighbor
C. global
D. interface
View answer
Correct Answer: C
Question #13
Refer to the exhibit.Refer to the exhibit. An ISP provides shared VoIP Extranet services to a customer in VRF-100 with these settings:The VoIP services are hosted in the 198.19.100.0/24 space.The customer has been assigned the 198.18.1.0/29 IP address block.VRF-100 is assigned import and export route target 65010:100.Which configuration must the engineer apply to PE-1 to provision VRF-100 and provide access to the shared services?
A. vrf definition VRF-100rd 172
B. vrf definition VRF-100rd 172
C. vrf definition VRF-100rd 172
D. vrf definition VRF-100rd 172
View answer
Correct Answer: D
Question #14
Company A must increase throughput between two non-IEEE 802.3ad switches located in the access and distribution layers. A network engineer must create a link group with the same speed and duplex. The STP protocol must not block any of the group ports. Which action completes the implementation?
A. AGroup Ethernet interfaces with mode desirable under the physical interfaces
B. BEnable Port Aggregation Protocol with mode auto under the logical group interface
C. CConfigure a group logical interface with mode active enabled
D. DBundle the physical interfaces with mode lacp configured on each of them
View answer
Correct Answer: A
Question #15
Which configuration enables BGP FlowSpec client function and installation of policies on all local interfaces?
A. flowspecaddress-family ipv4local-install interface-all
B. flowspecaddress-family ipv4install interface-all local
C. flowspecaddress-family ipv4install interface-all
D. flowspecaddress-family ipv4local-install all-interface
View answer
Correct Answer: A
Question #16
Refer to the exhibit. BGPsec is implemented on R1, R2, R3, and R4. BGP peering is established between neighboring autonomous systems.Which statement about implementation is true?
A. BGP updates from the iBGP peers are appended with a community of local-as
B. BGP updates from the all BGP peers are appended with a community of no-export
C. BGP updates from the eBGP peers are appended with an additional AS path value that is statically set by the domain administrator
D. BGP updates from the eBGP peers are appended with a BGPsec attribute sequence that includes a public key hash and digital signature
View answer
Correct Answer: D
Question #17
What Is the primary role of Ansible In a network?
A. It is used as a debugging tool for connectivity issues between the DMZ and an enterprise intranet
B. It Is used to diagnose Layer 11ssues In data centers that span more than one city block
C. It is used to deploy IPv6 configuration is networks That are dual slack
D. It is used as a network automation provisioning and configuration tool
E. Reveal Answer
View answer
Correct Answer: D
Question #18
While implementing TTL security, you issue the PE(config-router-af)#neighbor 2.2.2.2 ttl-security hops 2 command.After you issue this command, which BGP packets does the PE accept?
A. o 2
B. rom 2
C. o 2
D. rom 2
View answer
Correct Answer: D
Question #19
Refer to the exihibit. Refer to the exhibit Routers R1 and R2 are connected via a seal link and use the IS-IS routing protocol for route exchange After a configuration change on R2. IS-IS connectivity is interrupted A network engineer confirmed that the interfaces are in the UP state and connectivity exists between the two routers. Which two actions must the engineer perform to resolve the problem? (Choose two.)
A. ADisable padding for hello packets under the serial interface on R2 DUMPS
B. BChange the hello interface timer to 10 seconds on R1
C. CChange the MTU to 1500 bytes on R2
D. DEnable hello packet padding globally on R1
E. EChange R2 to an IS-IS Level 1 router
View answer
Correct Answer: AC
Question #20
Refer to the exhibit. Router 4 is added to the network and must be in the same area as router 1. Which NET should the engineer assign?
A. 49
B. 49
C. 49
D. 49
View answer
Correct Answer: D
Question #21
Refer to the exhibit. While troubleshooting the OSPF adjacency between routers R1 and R2, an engineer noticed that both routers are stuck in the EXCHANGE/EXSTART state. What should the engineer fix to solve the ongoing issue?
A. match OSPF network types
B. match IPv4 addresses
C. match MTU values
D. match OSPF areas
View answer
Correct Answer: C
Question #22
Refer to the exhibit. An engineer needs to implement this QoS policy on customer's network due to ongoing slow network issues. What will be the effect on the network when the engineer implements this configuration?
A. Traffic that is identified in the ciscopolicy class map will be remarked from IP precedence 1 to DSCP AF11 when it exits the pos0/2/0/0 interface
B. Traffic that is identified in the ciscotest class map will be marked with IP precedence 1 when it exits the pos0/2/0/0 interface
C. Traffic that is identified in the ciscopolicy class map will be marked with IP precedence 1 when it enters the pos0/2/0/0 interface
D. Traffic that is identified in the ciscotest class map will be remarked from IP precedence 1 to DSCP AF11 when it enters the pos0/2/0/0 interface
View answer
Correct Answer: B
Question #23
What is the function of the FEC field within the OTN signal structure?
A. It allows the sending devices to apply QoS within the OTN forwarding structure
B. It allows deep inspection of data payload fields
C. It allows receivers to correct errors upon data arrival
D. It allows source nodes to discard payload errors before transmitting data on the network
View answer
Correct Answer: C
Question #24
Refer to the exhibit. To protect in - band management access to CPE - R7, an engineer wants to allow only SSH management and provisioning traffic from management network 192.168.0.0/16. Which infrastructure ACL change must be applied to router PE - R9 to complete this task?A) B) C) D)
A. Option A
B. Option B
C. Option C
D. Option D
View answer
Correct Answer: C
Question #25
http://www.justcerts.comP-Refer to the exhibit:A network engineer is implementing a BGP protocol. Which effect of the local-as keyword in this configuration is true?
A. t enables peer 192
B. t enables peer 192
C. t enables peer 192
D. t enables peer 192
View answer
Correct Answer: D
Question #26
Refer to the exhibit. Which show command should be implemented to display per-interface statistics about uRPF drops and suppressed drops?
A. show cef interface
B. show ip traffic
C. show ip interface
D. show ip interface brief
View answer
Correct Answer: C
Question #27
Refer to the exhibit. A network engineer is implementing an OSPF configuration. Based on the output, which statement is true?
A. OSPFv3 does not run for IPv4 on FastEthernet0/0 until IPv6 routing is enabled on the router and IPv6 is enabled on interface FastEthernet0/0
B. In the ospfv3 1 area 1 ipv4 command, area 0 must be configured instead of area 1
C. OSPFv3 cannot be configured for IPv4; OSPFv3 works only for IPv6
D. "IPv6 routing not enabled" is just an informational message and OSPFv3 runs for IPv4 on interface FastEthernet0/0 anyway
View answer
Correct Answer: A
Question #28
Which configuration mode do you use to apply the mpls ldp graceful-restart command in IOS XE Software?
A. PLS LDP neighbor
B. nterface
C. PLS
D. lobal
View answer
Correct Answer: D
Question #29
Refer to the exhibit. While troubleshooting the OSPF adjacency between routers R1 and R2, an engineer noticed that both routers are stuck in the EXCHANGE/EXSTART state. What should the engineer fix to solve the ongoing issue?
A. match OSPF network types
B. match IPv4 addresses
C. match MTU values
D. match OSPF areas
View answer
Correct Answer: C
Question #30
While implementing TTL security, you issue the PE(config-router-af)#neighbor 2.2.2.2 ttl-security hops 2 command.After you issue this command, which BGP packets does the PE accept?
A. to 2
B. from 2
C. to 2
D. from 2
View answer
Correct Answer: D
Question #31
You are configuring MPLS traffic-engineering tunnels in the core. Which two ways exist for the tunnel path across the core? (Choose two.)
A. The dynamic path option is supported only with IS-IS
B. Tunnels can be configured with dynamic path or explicitly defined path
C. A zero bandwidth tunnel is not a valid option
D. The bandwidth statement creates a ג€hardג€ reservation on the link
E. Tunnel links inherit IGP metrics by default unless overridden
View answer
Correct Answer: BE
Question #32
A network engineer is configuring RIP as the routing protocol between multiple PEs and CEs. The engineer must avoid advertising the same routes back to their sources. Which action should be performed on the routers to accomplish this task?
A. Configure a different route distinguisher for each prefix
B. Define the site of origin on each interface
C. Define VRFs on each device to separate the traffic
D. Enable bidirectional forwarding detection on each device
E. Reveal Answer
View answer
Correct Answer: B
Question #33
Which MPLS design attribute can you use to provide Internet access to a major customer through a separate dedicated VPN?
A. The Internet gateway router is connected as a PE router to the MPLS backbone
B. The CE router supports VRF-Lite and the full BGP routing table
C. The Internet gateway inserts the full Internet BGP routing table into the Internet access VPN
D. The customer that needs the Internet access service is assigned to the same RTs as the Internet gateway
View answer
Correct Answer: D
Question #34
Refer to the exhibit. Router 1 is missing the route for the router 2 loopback 0. What should the engineer change to fix the problem?
A. Router 1 to be an ABR
B. the wildcard mask network statement in OSPF of Router 2
C. the hello timers on Router 1 and Router 2 to be different
D. the area numbers on Router 1 and Router 2 to be similar
View answer
Correct Answer: D
Question #35
Which three OSPF parameters must match before two devices can establish an OSPF adjacency? (Choose three.)
A. IP address
B. subnet mask
C. interface cost
D. process ID
E. area number
F. hello timer setting
View answer
Correct Answer: BEF
Question #36
You are creating new Cisco MPLS TE tunnels. Which type of RSVP message does the headend router send to reserve bandwidth on the path to the tailend router?
A. path
B. tear
C. error
D. reservation
View answer
Correct Answer: A
Question #37
Which regular expression query modifier function indicates the start of a string?
A. +
B. ^
C. $
D. [^]
View answer
Correct Answer: B
Question #38
A network team has failed to implement IS-IS multitopology. What is the reason for it?
A. The routing process supported Level 1 only
B. The router did not support VRFs
C. The routing process did not support extended metrics
D. The router did not have Cisco Discovery Protocol and Cisco Express Forwarding disabled
View answer
Correct Answer: C
Question #39
Which component is similar to an EVPN instance?
A. router distinguisher
B. MPLS label
C. IGP router ID
D. VRF
View answer
Correct Answer: D
Question #40
An engineer is configuring IEEE 802. 1ad on the access port on a new Cisco router. The access port handles traffic from multiple customer VLANs, and it is expected to mark allcustomer traffic to the same VLAN without dropping any traffic. Which configuration must the engineer apply?
A. nterface gigabitethernet0/0/1 encapsulation dot1q 10
B. nterface gigabitethernet0/0/1 ethernet dot1ad uni s-port
C. nterface gigabitethernet0/0/1 ethernet dot1ad uni nni
D. nterface gigabitethernet0/0/1 ethernet dot1ad uni c-port
View answer
Correct Answer: B
Question #41
What are two factors to consider when implementing NSR High Availability on an MPLS PE router? (Choose two.)
A. It requires all PE-CE sessions to support NSR
B. It requires routing protocol extensions
C. It consumes more memory and CPU resources than NSF
D. It operates normally without NSR support on the PE peers
E. It cannot sync state information across redundant RPs
View answer
Correct Answer: CD

View Answers after Submission

Please submit your email and WhatsApp to get the answers of questions.

Note: Please make sure your email ID and Whatsapp are valid so that you can get the correct exam results.

Email:
Whatsapp/phone number:
Contact Us


Copyright © 2024. Designer by SPOTO Official Website. All Rights Reserved.