DON'T WANT TO MISS A THING?

Certification Exam Passing Tips

Latest exam news and discount info

Curated and up-to-date by our experts

Yes, send me the newsletter

Free Cisco 300-615 DCIT Practice Questions 2026 Part3 | Cisco Data Center

Are you preparing for the Cisco 300-615 certification exam? SPOTO offers the Cisco 300-615 Premium File; all questions are aligned with the latest exam content and come with expert-provided answers. Our question banks cover the latest question types, core concepts, and detailed explanations, helping you familiarize yourself with the exam format and difficulty level. Whether you are reviewing core concepts or simulating a real exam environment, these resources will rapidly boost your confidence and readiness.
For over two decades, SPOTO has successfully helped numerous IT professionals secure their ideal positions at Fortune 500 companies. Download now to start practicing efficiently and ensure a high score on the actual exam. Don't miss this opportunity to pass your certification exam with ease!
Take other online exams
Question #1
Refer to the exhibit.A Cisco VXLAN must use bidirectional PIM so that:•Spine2 is the active RP for multicast group 225.0.0.0/24.•Loopback 254 is used as a logical interface for PIM configuration.After configuration was applied, Spine1 became the active RP for multicast group 225.0.0.0/24 instead of Spine2. Which action resolves the issue?
A. Delete the bidir keyword from ip pim rp address command on Spine1
B. Configure the IP pim ssm range 232
C. Modify the subnet mask of Loopback 254 to /30 on Spine2
D. Change the IP address of Loopback 254 to 10
View answer
Correct Answer: D

View The Updated 300-615 Exam Questions

SPOTO Provides 100% Real 300-615 Exam Questions for You to Pass Your 300-615 Exam!

Contact Us Get 300-615 Practice Test
Question #2
Refer to the exhibit.An engineer must restore the connectivity issue between NEXUS-SW-3 and NEXUS-SW-4. The engineer can ping the physical and loopback interfaces used in the underlay from VTEP-1. However, communication between the SVIs in NEXUS-SW-3 and NEXUS-SW-4 fails. Which action resolves the issue?
A. Change the VNI to VLAN mapping on the NEXUS-SW-2
B. Reload the NEXUS-SW-2 to enable the hardware Ethernet store-and-fwd-switching feature
C. Manually set the interface MTU to support jumbo frames on the NEXUS-SW-2
D. Reconfigure the VXLAN features in the VTEP switches on the NEXUS-SW-2
View answer
Correct Answer: A
Question #3
Refer to the exhibit.An engineer must restore the connectivity issue between NEXUS-SW-3 and NEXUS-SW-4. The engineer can ping the physical and loopback interfaces used in the underlay from VTEP-1. However, communication between the SVIs in NEXUS-SW-3 and NEXUS-SW-4 fails. Which action resolves the issue?
A. Change the VNI to VLAN mapping on the NEXUS-SW-2
B. Reload the NEXUS-SW-2 to enable the hardware Ethernet store-and-fwd-switching feature
C. Manually set the interface MTU to support jumbo frames on the NEXUS-SW-2
D. Reconfigure the VXLAN features in the VTEP switches on the NEXUS-SW-2
View answer
Correct Answer: A
Question #4
Refer to the exhibit.An engineer configures EVPN on Switch-1. but the neighbors fail to exchange EVPN routes. Which action resolves the issue?
A. Configure neighbor 192
B. Activate the IPv4 unicast address family for neighbor 192
C. Enable the send extended community option for the L2VPN EVPN address family
D. Advertise L2VPN EVPN under the IPv4 unicast address family
View answer
Correct Answer: C
Question #5
Refer to the exhibit. A network engineer connects the Cisco Nexus switch management port to the Internet using DHCP to allow the Guest shell that runs on theswitch to download Python packages. The engineer can ping google.com from the Cisco Nexus switch, but the Guest shell fails to download Python packages.Which action resolves the problem?
A. Update the Python packages directly on the Cisco Nexus switch
B. Manually configure DNS in the Guest shell, even if it is claimed on the Cisco Nexus switch through DHCP
C. Manually configure NTP in the Guest shell
D. Connect Guest shell to data plane interfaces to be able to connect to the networks outside of the Cisco Nexus switch
View answer
Correct Answer: B
Question #6
Refer to the exhibit.A Cisco UCS B-Series Blade Server is configured to boot from a shared storage via an iSCSI network. When a service profile is associated with the blade, the blade fails to attach the LUN. Which action resolves the issue?
A. egister the blade as an initiator on the storage array
B. stablish a Layer 2 connection between the blade and the storage
C. lace VLAN 0 on the interface that connects to the storage
D. mplement a Layer 3 connection between the blade and the storage
View answer
Correct Answer: C
Question #7
Refer to the exhibit.A switch is being downgraded to an earlier release because of a problem with the current release.After the switch is downgraded, it can no longer forward traffic. Which action resolves the issue?
A. nable ISSD after the downgrade is complete
B. oll back to the original image
C. eload the switch
D. hut and no shut the interfaces to the FEX
View answer
Correct Answer: A
Question #8
The Cisco Nexus switch is connected to a peer switch that is not running Cisco NX-OS. The switches are connected using port channel and are experiencing packet loss. Which action should be performed on the Cisco Nexus switch ports to resolve this issue?
A. urn on lacp suspend-individual
B. urn on lacp graceful-convergence
C. urn off lacp graceful-convergence
D. urn off lacp suspend-individual
View answer
Correct Answer: C
Question #9
Refer to the exhibit.Server A and Server B experience inter-L2VN reachability issues. A BGP L2VPN session is up on both leaf switches and each leaf switch learns the host routes of its local server, but the remote host routes are not in the VRF routing table. Which configuration resolves the issue?
A. Associate Layer 3 VNI to VRF on the NVE interface for both leaf switches
B. Modify multicast groups on Leaf1 to be unique per VNI
C. Apply an anycast gateway to each SVI gateway on both leaf switches
D. Configure BGP VPNv4 neighborship between the leaf switches and the spine
View answer
Correct Answer: A
Question #10
Refer to the exhibit.The VXLAN fabric with BGP EVPN control plane experiences connectivity issues. The hosts in the initial deployed VLAN fail to communicate. The environment is configured as follows:Private BGP ASN 65122 is used across the whole fabric.Each leaf node has iBGP peers with each spine node with default values.Address family L2VPN EVPN is enabled on all leaf and spine BGP speakers.Which BGP feature is required on the spines for all EVPN routes to be advertised throughout the VXLAN fabric?
A. ebgp-multihop
B. allowas-in
C. route-reflector-client
D. remove-private-as
View answer
Correct Answer: C
Question #11
Refer to the exhibit.An engineer must restore the connectivity issue between NEXUS-SW-3 and NEXUS-SW-4. The engineer can ping the physical and loopback interfaces used in the underlay from VTEP-1. However, communication between the SVIs in NEXUS-SW-3 and NEXUS-SW-4 fails. Which action resolves the issue?
A. Change the VNI to VLAN mapping on the NEXUS-SW-2
B. Reload the NEXUS-SW-2 to enable the hardware Ethernet store-and-fwd-switching feature
C. Manually set the interface MTU to support jumbo frames on the NEXUS-SW-2
D. Reconfigure the VXLAN features in the VTEP switches on the NEXUS-SW-2
View answer
Correct Answer: A
Question #12
Refer to the exhibit.The EEM script overrides all events in the system policy. What should be added to the script to resolve the issue?
A. event statement
B. environment variable
C. event-default action statement
D. configure terminal action
View answer
Correct Answer: A
Question #13
The Cisco Nexus switch is connected to a peer switch that is not running Cisco NX-OS. The switches are connected using port channel and are experiencingpacket loss. Which action should be performed on the Cisco Nexus switch ports to resolve this issue?
A. Turn on lacp suspend-individual
B. Turn on lacp graceful-convergence
C. Turn off lacp graceful-convergence
D. Turn off lacp suspend-individual
View answer
Correct Answer: C
Question #14
Refer to the exhibit. A network engineer configures an authentication domain through an LDAP provider on the Cisco UCS Manager for users from different companies to log into their respective organizations created in the UCS Manager. The engineer tests the configuration and notices that any user has login access to any organization in the UCS Manager. Which action should be taken to resolve the issue?
A. onfigure the Filter field with the company
B. onfigure the Attribute field with the company
C. onfigure the Attribute field with sAMAccountName=$company
D. onfigure the Filter field with sAMAccountName=$company
View answer
Correct Answer: D
Question #15
An IOM fails during a firmware upgrade and is unresponsive. Which action recovers the module?
A.
B.
C.
View answer
Correct Answer: A
Question #16
An engineer troubleshoots a packet flow from an access leaf to a spine. Which EVPN routes are expected on this connection?
A. EVPN Type 1-5
B. EVPN Type 0, 9, and 15
C. EVPN Type 9-15
D. EVPN Type 0 and 16
View answer
Correct Answer: A
Question #17
Refer to the exhibit A customer network uses OSPFv2 and MP-BGP protocols A network administrator installs a new Cisco Nexus Switch in the data center but experiences a BGP RIB failure Which action solves theissue?
A. Change the administrative distance of OSPF to 220
B. Configure the route as a BGP backdoor
C. Use a filter list for OSPF to filter both routes
D. Implement next-hop-self
View answer
Correct Answer: D
Question #18
Refer to the exhibit.Refer to the exhibit. An engineer troubleshoots an OSPF neighborship problem between Router R2 and Router R10. Which action resolves the problem?
A. Change area ID on Router R10
B. Resolve unicast reply from Router R2
C. Resolve authentication type on Router R10
D. Change router ID on Router R10
View answer
Correct Answer: B
Question #19
A customer configures HSRP between two data centers that are interconnected with OTV. The configuration succeeds, but traffic between two ESXi virtual hosts on the same site is routed suboptimally through the OTV overlay. Which two actions optimize the traffic? (Choose two.)
A. Disable first-hop redundancy
B. Filter HSRP traffic by using a Layer 3 VACL on the OTV edge devices
C. Filter HSRP by using a Layer 2 MAC-list on the ESXi vSwitch
D. Filter HSRP traffic by using a Layer 3 VACL on the ESXi vSwitch
E. Filter HSRP by using a Layer 2 MAC-list on the OTV edge devices
F. Reveal Answer
View answer
Correct Answer: AB
Question #20
Refer to the exhibit. A network engineer is implementing an RBAC on the Cisco Nexus 9000 Series Switch. The role called Host A fails to clear LACP counters on the port channel 20. Which configuration resolves the issue?
A. APermit rule number 3 and read-write L3 operation
B. BDelete rule 3 and create new rule 3 to allow the permit command
C. CChange the sequence of rule 2 and rule 3
D. DDelete rule 2 and create a new rule 4
View answer
Correct Answer: B
Question #21
An engineer is investigating traffic loss on a Cisco UCS B-Series blade server. The engineer discovers high rates of RX CRC STOMPED errors on the fabric interconnect ports to which the server traffic is pinned Which action resolves the issue?
A. hange the cables to fix physical connections
B. hange the flow control settings on the l/O module
C. pdate the firmware version on the virtual interface card adapter
D. onfigure the VLANs on the fabric interconnect
View answer
Correct Answer: A
Question #22
Refer to the exhibit.A port channel on a Cisco Nexus 9000 Series Switch uplink experiences connectivity issues. Which configuration resolves the issue?
A. channel-group 100 mode passive
B. channel-group 100 force mode on
C. channel-group 100 mode on
D. channel-group 100 mode active
View answer
Correct Answer: D
Question #23
Refer to the exhibit.Sw1 and Sw2 are two Cisco Nexus 9000 Series Switches that run Cisco NX-OS. They are VTEPs in thesame vPC domain. Which statement describes what happens in this scenario?
A. w1 drops all traffic because there is no (S, G) OIF list to encapsulate VXLAN multicast packets and send them out to the underlay network through the uplink interfaces
B. w1 performs the VxLAN multicast encapsulation and decapsulation for all traffic associated with the VxLAN VNIs
C. w1 and switch 2 perform the VxLAN multicast encapsulation and decapsulation for all traffic associated with the VxLAN VNIs, depending on the hashing
D. w2 did not send an IP PIM register to the rendezvous point for the multicast group of the VXLAN VNI
View answer
Correct Answer: C
Question #24
An engineer discovers that an NPV/NPIV uplink experiences a heavy load and plans to add more uplinks. What occurs when the new uplinks are added to the uplink?
A. Only new connections automatically use the new uplinks
B. Paths must be defined before new connections use the new uplinks
C. All connections must be reset before the new uplinks are used
D. New and existing connections automatically use the new uplinks
View answer
Correct Answer: D
Question #25
Refer to the exhibit.The administrator set up two pairs of Cisco Nexus switches. The administrator set different vPC priorities on all four Nexus switches. As soon as the administrator activates the vPC between the two pairs the network faces different issues. The problems range from both Nexus pairs declare themselves as root bridge, as well as spanning-tree inconsistencies and traffic forwarding issues. Which action resolves these issues?
A. Change the role priority on one pair
B. Configure a vPC peer link between both peers
C. Change domain ID on one pair to a different ID
D. Configure peer-config-check-bypass on both pairs
View answer
Correct Answer: C
Question #26
Refer to the exhibit.A port channel on a Cisco Nexus 9000 Series Switch uplink experiences connectivity issues. Which configuration resolves the issue?
A. channel-group 100 mode passive
B. channel-group 100 force mode on
C. channel-group 100 mode on
D. channel-group 100 mode active
View answer
Correct Answer: D
Question #27
An engineer must upgrade all components in a Cisco UCS domain to the same package version, but the upgrade process fails to complete. Which set of Auto Install actions resolves the problem?
A. nstall Hypervisor Firmware, then Install Infrastructure Firmware
B. nstall infrastructure Firmware, then Install Hypervisor Firmware
C. nstall Server Firmware, then Install Infrastructure Firmware
D. nstall Infrastructure Firmware, then Install Server Firmware
View answer
Correct Answer: D
Question #28
Refer to the exhibit.A network engineer must use BGP to route IPv4 and IPv6 routes between R1 and R2. The IPv4 addresses are exchanged as expected between the routers through BGP. The routers have reached an Established BGP state. However, the IPv6 routes from R2 fail to show in the routing table of R1. Which action resolves the issue?
A. Enable IPv6 routing on R1
B. Create a route map that sets the IPv6 next hop
C. Configure an IPv6 BGP neighbor on R1
D. Advertise L2VPN EVPN under IPv4 unicast address family
View answer
Correct Answer: B
Question #29
A mission-critical server is connected to site A. Connectivity to this server is lost from site B because the MAC route is missing in the OTV VDC of the Cisco Nexus7000 in site B due to MAC aging. Which action allows the flooding of the unknown unicast MAC on the Nexus 7000 in the OTV VDC?
A. se route map to statically advertise this MAC and redistribute with IS-IS
B. nknown unicast flooding is not allowed
C. se the otv flood mac <> command to selectively flood traffic for a given MAC
D. se the otv isis bfd <> command to configure BFD protocol
View answer
Correct Answer: C
Question #30
A Cisco uCs C-Series Server powers off due to a power outage. The server should turn on when the power is restored with a fixed delay of 3 minutes. However, it remained powered off for more than 3 minutes after the engineer powered it back online. Which two actions resolve the issue (Choose two.)
A. Configure the power-restore-policy
B. Configure the power restore last-state policy
C. Set the delay value to 180
D. Set the delay fixed value to 3
E. Configure power sync policy
F. Reveal Answer
View answer
Correct Answer: AC
Question #31
Refer to the exhibit. The HSRP instance on both switches is showing as active. Which action resolves the issue?
A. Configure the HSRP timers to be the same
B. Allow VLAN 100 between the switches
C. Configure the IP address of N9K-B on the same subnet as N9K-A
D. Configure preempt on only one of the switches
View answer
Correct Answer: B
Question #32
Refer to the exhibit.A Cisco VXLAN must use bidirectional PIM so that:•Spine2 is the active RP for multicast group 225.0.0.0/24.•Loopback 254 is used as a logical interface for PIM configuration.After configuration was applied, Spine1 became the active RP for multicast group 225.0.0.0/24 instead of Spine2. Which action resolves the issue?
A. Delete the bidir keyword from ip pim rp address command on Spine1
B. Configure the IP pim ssm range 232
C. Modify the subnet mask of Loopback 254 to /30 on Spine2
D. Change the IP address of Loopback 254 to 10
View answer
Correct Answer: D
Question #33
The Cisco Nexus switch is connected to a peer switch that is not running Cisco NX - OS. The switches are connected using port channel and are experiencing packet loss. Which action should be performed on the Cisco Nexus switch ports to resolve this issue?
A. Turn on lacp suspend - individual
B. Turn on lacp graceful - convergence
C. Turn off lacp graceful - convergence
D. Turn off lacp suspend - individual
View answer
Correct Answer: C
Question #34
Refer to the exhibit.The VXLAN fabric with BGP EVPN control plane experiences connectivity issues. The hosts in the initial deployed VLAN fail to communicate. The environment is configured as follows:Private BGP ASN 65122 is used across the whole fabric.Each leaf node has iBGP peers with each spine node with default values.Address family L2VPN EVPN is enabled on all leaf and spine BGP speakers.Which BGP feature is required on the spines for all EVPN routes to be advertised throughout the VXLAN fabric?
A. ebgp-multihop
B. allowas-in
C. route-reflector-client
D. remove-private-as
View answer
Correct Answer: C
Question #35
A vPC Type-1 inconsistency between two vPC peers in a VXLAN EVPN setup is discovered. Which two actions need to be attempted to resolve the issue?(Choose two.)
A. onfigure the NVE interfaces to be Up on both switches
B. et a different distributed gateway virtual MAC address
C. et a different secondary IP addresses on NVE source-interface
D. onfigure the same VNI to multicast group maping
E. et a different primary IP addresses on NVE source-interface
View answer
Correct Answer: AD
Question #36
Refer to the exhibit.A port channel on a Cisco Nexus 9000 Series Switch uplink experiences connectivity issues. Which configuration resolves the issue?
A. channel-group 100 mode passive
B. channel-group 100 force mode on
C. channel-group 100 mode on
D. channel-group 100 mode active
View answer
Correct Answer: D
Question #37
"A network engineer troubleshoots an issue at a Cisco data center environment with these conditions: * The data center has Cisco Nexus 9000 Series Switches running the vPC setup. * The gateway of the servers is an HSRP IP address between the VLAN interfaces configured on both Cisco Nexus switches. * Some of the client application servers are implementing fast-path forwarding for the return traffic. * Those servers are sending the return traffic to the VLAN interface MAC address instead of the HSRP MAC address. The network engineer discovers that some traffic is dropped because it passes the vPC peer link to be forwarded out the vPC interface. What must be configured on the vPC switches to resolve the issue?
A. Apeer-switch
B. Bpeer-gateway
C. Carp synchronize
D. Dspanning-tree
View answer
Correct Answer: B
Question #38
A mission-critical server is connected to siteA. Connectivity to this server is lost from site B because the MACroute is missing in the OTV VDC of the Cisco Nexus 7000 in site B due to MAC aging. Which action allows theflooding of the unknown unicast MAC on the Nexus 7000 in the OTV VDC?
A. Use route map to statically advertise this MAC and redistribute with IS-IS
B. Unknown unicast flooding is not allowed
C. Use the otv flood mac <> command to selectively flood traffic for a given MA
D. Use the otvisisbfd<> command to configure BFD protocol
View answer
Correct Answer: B
Question #39
Refer to the exhibit.The VXLAN fabric with BGP EVPN control plane experiences connectivity issues. The hosts in the initial deployed VLAN fail to communicate. The environment is configured as follows:Private BGP ASN 65122 is used across the whole fabric.Each leaf node has iBGP peers with each spine node with default values.Address family L2VPN EVPN is enabled on all leaf and spine BGP speakers.Which BGP feature is required on the spines for all EVPN routes to be advertised throughout the VXLAN fabric?
A. ebgp-multihop
B. allowas-in
C. route-reflector-client
D. remove-private-as
View answer
Correct Answer: C
Question #40
Refer to the exhibit.A Cisco VXLAN must use bidirectional PIM so that:•Spine2 is the active RP for multicast group 225.0.0.0/24.•Loopback 254 is used as a logical interface for PIM configuration.After configuration was applied, Spine1 became the active RP for multicast group 225.0.0.0/24 instead of Spine2. Which action resolves the issue?
A. Delete the bidir keyword from ip pim rp address command on Spine1
B. Configure the IP pim ssm range 232
C. Modify the subnet mask of Loopback 254 to /30 on Spine2
D. Change the IP address of Loopback 254 to 10
View answer
Correct Answer: D
Question #41
An engineer is implementing a new BGP peering in their new data center. The engineer set up the BGP session that peers with the remote end. As soon as the BGP peers attempt to exchange routing prefixes, one of the BGP peers drops the connection. After reviewing the configuration, the engineer reviews the logging messages. The engineer discovers that the router is missing keepalives from the remote end and terminates the session. Which action resolves the issue?
A. Set the bgp transport path-mtu-discovery attribute on both peers
B. Set the higher values for the BGP keepalive and hold-down timers on both peers
C. Configure the matching BGP AS numbers between the peers
D. Configure the matching BGP passwords between the peers
View answer
Correct Answer: B
Question #42
Refer to the exhibit.An engineer must restore the connectivity issue between NEXUS-SW-3 and NEXUS-SW-4. The engineer can ping the physical and loopback interfaces used in the underlay from VTEP-1. However, communication between the SVIs in NEXUS-SW-3 and NEXUS-SW-4 fails. Which action resolves the issue?
A. Change the VNI to VLAN mapping on the NEXUS-SW-2
B. Reload the NEXUS-SW-2 to enable the hardware Ethernet store-and-fwd-switching feature
C. Manually set the interface MTU to support jumbo frames on the NEXUS-SW-2
D. Reconfigure the VXLAN features in the VTEP switches on the NEXUS-SW-2
View answer
Correct Answer: A
Question #43
Refer to the exhibit.An engineer configures EVPN on Switch-1. but the neighbors fail to exchange EVPN routes. Which action resolves the issue?
A. Configure neighbor 192
B. Activate the IPv4 unicast address family for neighbor 192
C. Enable the send extended community option for the L2VPN EVPN address family
D. Advertise L2VPN EVPN under the IPv4 unicast address family
View answer
Correct Answer: C
Question #44
Refer to the exhibit.An upgrade operation fails with an error displayed. Which action resolve the issue?
A. se a different system image
B. se a different kickstart image
C. llocate extra space on a flash drive to extract a kickstart image
D. llocate extra space on a flash drive to extract a system image
View answer
Correct Answer: A
Question #45
Refer to the exhibit.The LACP port channel fails between N9K-A and N9K-B. Which action resolves the issue?
A. Add the member interfaces to the port channel on N9K-B
B. Configure the port channel to be in active mode on N9K-
C. Add the member interfaces to the port channel on N9K-A
D. Configure the port channel to be in static mode on N9K-A
View answer
Correct Answer: C
Question #46
Refer to the exhibit.A Cisco VXLAN must use bidirectional PIM so that:•Spine2 is the active RP for multicast group 225.0.0.0/24.•Loopback 254 is used as a logical interface for PIM configuration.After configuration was applied, Spine1 became the active RP for multicast group 225.0.0.0/24 instead of Spine2. Which action resolves the issue?
A. Delete the bidir keyword from ip pim rp address command on Spine1
B. Configure the IP pim ssm range 232
C. Modify the subnet mask of Loopback 254 to /30 on Spine2
D. Change the IP address of Loopback 254 to 10
View answer
Correct Answer: D
Question #47
An engineer troubleshoots a fabric discovery failure. Which two requirements about switch connectivity must be verified to solve the problem? (Choose two.)
A. A Cisco APIC must be attached to a spine node only
B. A Cisco APIC must be attached to leaf nodes
C. Spine nodes must connect to other spine nodes
D. A Cisco APIC must be dual-attached to two separate spine nodes
E. Leaf nodes must connect to spine nodes only
View answer
Correct Answer: BE
Question #48
Refer to the exhibit.The VXLAN fabric with BGP EVPN control plane experiences connectivity issues. The hosts in the initial deployed VLAN fail to communicate. The environment is configured as follows:Private BGP ASN 65122 is used across the whole fabric.Each leaf node has iBGP peers with each spine node with default values.Address family L2VPN EVPN is enabled on all leaf and spine BGP speakers.Which BGP feature is required on the spines for all EVPN routes to be advertised throughout the VXLAN fabric?
A. ebgp-multihop
B. allowas-in
C. route-reflector-client
D. remove-private-as
View answer
Correct Answer: C
Question #49
An engineer discovers that an NPV/NPIV uplink experiences a heavy load and plans to add more uplinks. Which statement about what occurs when the new uplinks are added is true?
A. Only new connections use the new uplinks automatically
B. Paths must be defined before new connections can use the new uplinks
C. All connections must be reset before the new uplinks can be used
D. New and existing connections use the new uplinks automatically
View answer
Correct Answer: D
Question #50
Refer to the exhibit. The HSRP configuration in the exhibit fails to function. Which action resolves this issue?
A. Enable IP redirects
B. Set the MTU to 1500 bytes
C. Configure HSRP version 2
D. Configure the same HSRP group on both devices
View answer
Correct Answer: C
Question #51
A vPC Type - 1 inconsistency between two vPC peers in a VXLAN EVPN setup is discovered. Which two actions need to be attempted to resolve the issue? (Choose two.)
A. Configure the NVE interfaces to be Up on both switches
B. Set a different distributed gateway virtual MAC address
C. Set a different secondary IP addresses on NVE source - interface
D. Configure the same VNI to multicast group maping
E. Set a different primary IP addresses on NVE source - interface
View answer
Correct Answer: AD
Question #52
Refer to the exhibit.A port channel on a Cisco Nexus 9000 Series Switch uplink experiences connectivity issues. Which configuration resolves the issue?
A. channel-group 100 mode passive
B. channel-group 100 force mode on
C. channel-group 100 mode on
D. channel-group 100 mode active
View answer
Correct Answer: D
Question #53
An engineer troubleshoots a VXLAN EVPN data center. The applications in the data center fail to reach the DNS server that is located at IP 10.10.10.10. The engineer examines the BGP EVPN routing table and notes that the IP prefix route that covers the DNS server is missing. Which action resolves the issue?
A. Set the IP prefix route to represent [5]:[0]:[0]:[32]:[10
B. Set the IP prefix route to represent [2]:[0]:[0]:[48]:[0050
C. Configure an IP ARP entry to represent [2]:[0]:[0]:[48]:[0050
D. Configure an IP ARP entry to represent [4]:[0300
View answer
Correct Answer: A
Question #54
Refer to the exhibit.An engineer must restore the connectivity issue between NEXUS-SW-3 and NEXUS-SW-4. The engineer can ping the physical and loopback interfaces used in the underlay from VTEP-1. However, communication between the SVIs in NEXUS-SW-3 and NEXUS-SW-4 fails. Which action resolves the issue?
A. Change the VNI to VLAN mapping on the NEXUS-SW-2
B. Reload the NEXUS-SW-2 to enable the hardware Ethernet store-and-fwd-switching feature
C. Manually set the interface MTU to support jumbo frames on the NEXUS-SW-2
D. Reconfigure the VXLAN features in the VTEP switches on the NEXUS-SW-2
View answer
Correct Answer: A
Question #55
Refer to the exhibit.The VXLAN fabric with BGP EVPN control plane experiences connectivity issues. The hosts in the initial deployed VLAN fail to communicate. The environment is configured as follows:Private BGP ASN 65122 is used across the whole fabric.Each leaf node has iBGP peers with each spine node with default values.Address family L2VPN EVPN is enabled on all leaf and spine BGP speakers.Which BGP feature is required on the spines for all EVPN routes to be advertised throughout the VXLAN fabric?
A. ebgp-multihop
B. allowas-in
C. route-reflector-client
D. remove-private-as
View answer
Correct Answer: C

View Answers after Submission

Please submit your email and WhatsApp to get the answers of questions.

Note: Please make sure your email ID and Whatsapp are valid so that you can get the correct exam results.

Email:
Whatsapp/phone number:
Contact Us


Copyright © 2024. Designer by SPOTO Official Website. All Rights Reserved.