DON'T WANT TO MISS A THING?

Certification Exam Passing Tips

Latest exam news and discount info

Curated and up-to-date by our experts

Yes, send me the newsletter

Free Cisco 300-615 Actual Exam Questions | Practice Tests & Study Materials

Preparing for the Cisco 300-615 exam becomes more effective with access to free actual exam questions and answers. These resources provide candidates with a realistic idea of the types of questions they will face on the exam. By utilizing exam practice questions, candidates can assess their understanding of key concepts while identifying areas that need further study. Practice exams simulate the real exam environment, helping to build confidence and improve time management skills. Certification practice tests and other exam preparation materials are essential tools for achieving success. Real exam questions provide insight into the exam structure, helping candidates to focus on the most important topics. Take advantage of these free resources to enhance your study plan and increase your chances of passing the Cisco 300-615 exam on the first try.
Take other online exams
Question #1
An engineer troubleshoots a Cisco UCS B-Series environment and discovers that the status of the CNA is degraded in the CLI and the Cisco UCS Manager GUI. What should be done to resolve the issue?
A. nstall the adapter firmware version that is compatible with Cisco UCs Manager
B. eat the blade server correctly in the chassis
C. se the supported adapter on that server model
D. nstall the server air baffles correctly
View answer
Correct Answer: A
Question #2
After an upgrade, the standby supervisor of the Cisco N9K-C9504 Series Switch fails to boot and displays the message SYSMGR-2-STANDBY_BOOT_FAILED. Which action resolves the issue?
A. eload the standby supervisor from the TFTP server
B. eload the active supervisor from the bootflash
C. eload the active supervisor from the TFTP server
D. eload the standby supervisor from the bootflash
View answer
Correct Answer: D
Question #3
An engineer is upgrading the Cisco UCS C240 M5 server's firmware using the Non-Interactive Host Upgrade Utility (NIHUU) tool and the Python script. The ISO mapping is configured as CIFS and the mount option parameter is specified in the NIHU configuration file. However, the NIHUU fails to upgrade due to the ISO mapping error. Which action resolves the issue?
A. nter BIOS setup and change the admin password
B. nable TLS 1
C. pdate and activate Cisco IMC firmware using XML API
D. ownload the software from USB flash drive
View answer
Correct Answer: B
Question #4
A Cisco UCS B-Series Blade Server is configured to boot a VMware ESXi host from an EMC VNX storage array by using a Fibre Channel SAN. The boot order is confirmed to be configured as expected, but the server fails to boot from the SAN. Which action resolves the problem?
A. et the same WWNN pools for vHBA adapters
B. et the same WWPN pools for vHBA adapters
C. et the boot LUN to the highest LUN ID in the storage array
D. et the boot LUN to the lowest LUN ID in the storage array
View answer
Correct Answer: D
Question #5
Cisco UCS Manager raises a critical error message that indicates that the system has overlapping Ethernet and FCoE VLANs. All of the Ethernet traffic on the overlapping VLANs drops. Which action resolves the issue?
A. odify the VLAN assignment to vNICs
B. hange the PIN groups on the vHBAs
C. odify the FCoE VLAN
D. et the FCoE VLAN as the native VLAN on server uplinks
View answer
Correct Answer: C
Question #6
An engineer configures role-based access control for the Cisco UCS Manager. UserA must be allowed read-only access to the system. These events occur after the system is implemented:UserA attempts to log in but receives an "Authentication Failed" message.UserB successfully logs in by using an administrator role.Both users use valid LDAP passwords.Which action resolves the issue?
A. nable primary group rules for LDAP providers
B. dd locales to the LDAP group map of UserB
C. ssign a default role policy for remote users
D. dd locales to the LDAP group map of UserB
View answer
Correct Answer: C
Question #7
A network engineer troubleshoots an issue at a Cisco data center environment with these conditions:The data center has Cisco Nexus 9000 Series Switches running the vPC setup.The gateway of the servers is an HSRP IP address between the VLAN interfaces configured on both Cisco Nexus switches.Some of the client application servers are implementing fast-path forwarding for the return traffic.Those servers are sending the return traffic to the VLAN interface MAC address instead of the HSRP MAC address.The networ
A. eer-gateway
B. rp synchronize
C. eer-switch
D. panning-tre
View answer
Correct Answer: A
Question #8
An engineer deploys a Cisco fabric network based on spine-leaf architecture. Cisco DCNM has been integrated to support the automation of a virtual network service of a firewall. After integration, the engineer observes that the host traffic does not reach the firewall node. Which action resolves the issue?
A. pdate the host node IP address in DCNM
B. elete the service node IP address in DCNM
C. omplete the service configuration parameters
D. onfigure the required profile for the host network
View answer
Correct Answer: D
Question #9
An engineer performs a Cisco B-Series firmware upgrade using a host firmware pack and AutoInstall server feature on an adapter. The adapter activation stops at the pending-next-boot state. The issue occurs at the adapter activation stage during the BIOS and adapter update process. Which set of actions resolves the issue?
A. et the Activate status on the adapter to Ready
B. og in to Cisco UCS Manager
C. isable the fabric services
D. evert the BIOS to the prior working version
E. eboot the operating syste
View answer
Correct Answer: A
Question #10
A network engineer must configure SNMP monitoring on the Cisco Nexus 5000 Series Switch. The engineer issues the SNMP-server user testuser enforcePriv command but receives this message: "Unable to update CLI users database" Which change to permissions for testuser resolves the issue?
A. dd read permission
B. estrict read permission
C. dd write permission
D. estrict write permissio
View answer
Correct Answer: C
Question #11
A network engineer is implementing the Cisco ACI Fabric and notices that the Leaf-1 switch is registered has an assigned name, but is displayed as inactive in the APIC. After further investigation, it became clear that the leaf switch was recently moved from another Cisco ACI environment. Which action resolves the problem?
A. efine the new TEP address for Leaf-1
B. lean reload the Leaf-1 switch
C. hange the clock offset from low to high between apic1 and Leaf-1
D. odify the ISIS interface peering IP address between apic1 and Leaf-1
View answer
Correct Answer: B
Question #12
An engineer configures FCoE between a set of ESXi hosts and a Cisco Nexus 5000 Series Switch. The Converged Network Adapter of the host fails to receive the response from the Cisco Nexus device. Also, the VFC interface is in a down state, and the FIP adapter fails to receive 802.1q tagged frames. The host interface is configured for VLAN trunking. Which action resolves the issue?
A. et the bound Ethernet trunk interface to non-FCoE native VLAN
B. ctivate the reception of Xoff pause frames from the server
C. nable the active STP port state on the bound Ethernet interface
D. onfigure the UF link as a spanning-tree edge port
View answer
Correct Answer: A
Question #13
An engineer troubleshoots a Cisco UCS B-Series environment and discovers that the status of the CNA is degraded in the CLI and the Cisco UCS Manager GUI. What should be done to resolve the issue?
A. nstall the adapter firmware version that is compatible with Cisco UCs Manager
B. eat the blade server correctly in the chassis
C. se the supported adapter on that server model
D. nstall the server air baffles correctly
View answer
Correct Answer: A
Question #14
After an upgrade, the standby supervisor of the Cisco N9K-C9504 Series Switch fails to boot and displays the message SYSMGR-2-STANDBY_BOOT_FAILED. Which action resolves the issue?
A. eload the standby supervisor from the TFTP server
B. eload the active supervisor from the bootflash
C. eload the active supervisor from the TFTP server
D. eload the standby supervisor from the bootflash
View answer
Correct Answer: D
Question #15
An engineer is upgrading the Cisco UCS C240 M5 server's firmware using the Non-Interactive Host Upgrade Utility (NIHUU) tool and the Python script. The ISO mapping is configured as CIFS and the mount option parameter is specified in the NIHU configuration file. However, the NIHUU fails to upgrade due to the ISO mapping error. Which action resolves the issue?
A. nter BIOS setup and change the admin password
B. nable TLS 1
C. pdate and activate Cisco IMC firmware using XML API
D. ownload the software from USB flash drive
View answer
Correct Answer: B
Question #16
A Cisco UCS B-Series Blade Server is configured to boot a VMware ESXi host from an EMC VNX storage array by using a Fibre Channel SAN. The boot order is confirmed to be configured as expected, but the server fails to boot from the SAN. Which action resolves the problem?
A. et the same WWNN pools for vHBA adapters
B. et the same WWPN pools for vHBA adapters
C. et the boot LUN to the highest LUN ID in the storage array
D. et the boot LUN to the lowest LUN ID in the storage array
View answer
Correct Answer: D
Question #17
Cisco UCS Manager raises a critical error message that indicates that the system has overlapping Ethernet and FCoE VLANs. All of the Ethernet traffic on the overlapping VLANs drops. Which action resolves the issue?
A. odify the VLAN assignment to vNICs
B. hange the PIN groups on the vHBAs
C. odify the FCoE VLAN
D. et the FCoE VLAN as the native VLAN on server uplinks
View answer
Correct Answer: C
Question #18
An engineer configures role-based access control for the Cisco UCS Manager. UserA must be allowed read-only access to the system. These events occur after the system is implemented:UserA attempts to log in but receives an "Authentication Failed" message.UserB successfully logs in by using an administrator role.Both users use valid LDAP passwords.Which action resolves the issue?
A. nable primary group rules for LDAP providers
B. dd locales to the LDAP group map of UserB
C. ssign a default role policy for remote users
D. dd locales to the LDAP group map of UserB
View answer
Correct Answer: C
Question #19
An engineer upgrades Cisco UCS firmware from release 3.1(2) to release 3.1(3) using AutoInstall. Both fabric interconnects go offline during the software upgrade installation and issue multiple FSM retries in the DeployPollActivate stage. Which set of actions resolves the issue?
A. cknowledge the error and reboot the primary fabric interconnect
B. lear the startup version of the default infrastructure and server pack
C. pgrade with the Force attribute through AutoInstall
D. nable the management interface monitoring policy on the fabric interconnects
E. ommit the pending fabric interconnect reboot activity
F. ix the rights to 666 with the debug plugin on the primary fabric interconnect
G. ontinue the upgrade on both fabric interconnects
View answer
Correct Answer: B
Question #20
A network engineer troubleshoots an issue at a Cisco data center environment with these conditions:The data center has Cisco Nexus 9000 Series Switches running the vPC setup.The gateway of the servers is an HSRP IP address between the VLAN interfaces configured on both Cisco Nexus switches.Some of the client application servers are implementing fast-path forwarding for the return traffic.Those servers are sending the return traffic to the VLAN interface MAC address instead of the HSRP MAC address.The networ
A. eer-gateway
B. rp synchronize
C. eer-switch
D. panning-tre
View answer
Correct Answer: A

View Answers after Submission

Please submit your email and WhatsApp to get the answers of questions.

Note: Please make sure your email ID and Whatsapp are valid so that you can get the correct exam results.

Email:
Whatsapp/phone number:


Copyright © 2024. Designer by SPOTO Official Website. All Rights Reserved.