DON'T WANT TO MISS A THING?

Certification Exam Passing Tips

Latest exam news and discount info

Curated and up-to-date by our experts

Yes, send me the newsletter

Free Cisco 300-515 SPVI Practice Questions 2026 Part2

Are you preparing for the Cisco 300-515 certification exam? SPOTO offers the Cisco 300-515 Premium File; all questions are aligned with the latest exam content and come with expert-provided answers. Our question banks cover the latest question types, core concepts, and detailed explanations, helping you familiarize yourself with the exam format and difficulty level. Whether you are reviewing core concepts or simulating a real exam environment, these resources will rapidly boost your confidence and readiness.
For over two decades, SPOTO has successfully helped numerous IT professionals secure their ideal positions at Fortune 500 companies. Download now to start practicing efficiently and ensure a high score on the actual exam. Don't miss this opportunity to pass your certification exam with ease!
Take other online exams
Question #1
An engineer needs to improve MPLS network management by implementing a set of tools to supportthe NOC engineers in troubleshooting network failures. Which feature should the engineerimplement to check the connectivity of the MPLS LSP between the ingress and egress PE routers?
A. PLS OAM
B. PLS-TP
C. DP autodiscovery
D. xtended ping
View answer
Correct Answer: A

View The Updated 300-515 Exam Questions

SPOTO Provides 100% Real 300-515 Exam Questions for You to Pass Your 300-515 Exam!

Contact Us Get 300-515 Practice Test
Question #2
Which two statements describe primary differences between MPLS Layer 2 and Layer 3 VPNs? (Choose two.)
A. Layer 2 VPNs use IPsec tunneling, but Layer 3 VPNs use L2TPv3 tunneling
B. Layer 2 VPNs use AToM, but Layer 3 VPNs use MPLS/BGP
C. Layer 2 VPNs use BGP, but Layer 3 VPNs use VPLS
D. Layer 2 VPNs use L2TPv3 tunneling, but Layer 3 VPNs use GRE tunneling
E. Layer 2 VPNs use IPsec tunneling, but Layer 3 VPNs use pseudowires to provide tunneling
View answer
Correct Answer: BD
Question #3
Exhibit: What is the effect of this configuration?
A. AThe mroute table is cleared
B. BRouter 1 accepts multicast routes with a tag of 12:1
C. CA Cisco MPLS TE tunnel is generated with 192
D. DAn LSP virtual interface tunnel is created
View answer
Correct Answer: B
Question #4
An engineer is troubleshooting an ongoing network outage. Which command should he use that can display the live log files for a process or service running on a network device?
A. traceroute
B. show run
C. ping
D. debug
View answer
Correct Answer: D
Question #5
What is the primary function of a VRF on a router?
A. It enables the router to support multiple separate routing tables, which allows the device to handle overlapping IP addresses
B. It enables a router to run BGP and a distance vector routing protocol at the same time, which allows it to serve as a VPN endpoint between remote sites
C. It enables a router to configure VLANs locally, which provides segregation between networks
D. It enables the router to provide faster switching through the network by using labels to identify the input and output interfaces for neighbor routers
E. Reveal Answer
View answer
Correct Answer: A
Question #6
Which utility can you use to validate an LSP in an MPLS environment?
A. uRPF
B. MPLS LSP ping
C. logging
D. RSVP
View answer
Correct Answer: B
Question #7
An engineer is investigating an MPLS LDP issue. Which command should an engineer use on a Cisco IOS XE device to display the contents of the LFIB?
A. show mpls forwarding-table
B. show mpls ldp neighbors
C. show mpls ldp labels
D. show mpls ldp bindings
View answer
Correct Answer: A
Question #8
Refer to the exhibit.If the two devices are operating normally, which two conclusions can you draw from this configuration? (Choose two.)
A. CE1 must use OSPF to establish a neighbor relationship with PE1
B. PE1 labels the routes it learns from CE1 with the route - target 222:2 and shares them with its VPNv4 peers
C. PE1 labels the routes it learns from CE1 with the route - target 111:1 and shares them with its VPNv4 peers
D. The PE - CE routes between the devices are being exchanged by OSPF
E. CE1 is supporting CSC
View answer
Correct Answer: AD
Question #9
The network engineering group of a large ISP needs to harden the management plane of its Cisco 9000Series ASRs. While addressing IPv6 ICMP issues, they realized they have to limit the rate at which IPv6 ICMP error messages are sent out on the network. Which command do they need to apply?
A. icmp ipv6 rate-limit unreachable 1000
B. ipv6 rate-limit 1000
C. icmp ipv4 rate-limit unreachable 1000
D. ipv6 icmp error-interval 50 20
E. Reveal Answer
View answer
Correct Answer: D
Question #10
In a typical service provider environment, which two tools are used to help scale PE router connectivity requirements? (Choose two.)
A. route reflectors
B. VPNv4 address family
C. originator ID
D. cluster ID
E. confederations
View answer
Correct Answer: AE
Question #11
Which two BGP attributes prevent loops in a route reflector environment? (Choose two.)
A. cluster ID
B. local preference
C. origin
D. originator ID
E. AS_PATH
View answer
Correct Answer: AD
Question #12
Refer to the exhibit. A network engineer has been called to configure the four PE devices in order to enable full communication among the four CE devices connected to them. While starting to configure, he experienced a connectivity issue. Which two tasks should the engineer perform in order to begin the process correctly? (Choose two.)
A. onfigure PE3 to export route-targets 100:1 and 200:2
B. onfigure PE3 to import route-targets 100:1 and 200:2
C. onfigure PE4 to import route-targets 101:1 and 202:2
D. onfigure PE2 to export route-targets 300:3 and 400:4
E. onfigure PE1 to import route-targets 300:3 and 400:4
View answer
Correct Answer: AB
Question #13
An engineer is troubleshooting AToM on an IOS XE router and receives an error when creating the xconnect.
A. encapsulation mpls
B. encapsulation 12tpv3
C. protocol 12tpv3
D. protocol none
View answer
Correct Answer: A
Question #14
Which kind of traffic is supported in an MVPN Extranet?
A. APIM dense mode with Reverse Path Forwarding
B. BPIM dense mode
C. CPIM sparse mode
D. DBidirectional PIM
View answer
Correct Answer: C
Question #15
While troubleshooting EoMPLS configuration problems, which three parameters should an engineer match between the two ends of the pseudowire configurations? (Choose three.)
A. VLAN name
B. Xconnect group name
C. EFP subinterface number
D. pseudowire ID
E. MTU size
F. control word usage
View answer
Correct Answer: DEF
Question #16
Which two statements about MPLS L3 VPN RDs are true? (Choose two.)
A. They enable EIGRP to use address families to separate traffic between IPv4 and VPNv4
B. They are represented as 32-bit values
C. They are represented as 64-bit values
D. They enable OSPF to import and export routes into the global routing table of a router
E. They allow BGP to uniquely identify duplicate routes
View answer
Correct Answer: CE
Question #17
Refer to the exhibit. A network engineer has been called to configure the four PE devices in order to enable full communication among the four CE devicesconnected to them. While starting to configure, he experienced a connectivity issue. Which two tasks should the engineer perform in order to begin the processcorrectly? (Choose two.)
A. Configure PE3 to export route-targets 100:1 and 200:2
B. Configure PE3 to import route-targets 100:1 and 200:2
C. Configure PE4 to import route-targets 101:1 and 202:2
D. Configure PE2 to export route-targets 300:3 and 400:4
E. Configure PE1 to import route-targets 300:3 and 400:4
View answer
Correct Answer: AB
Question #18
Which two statements describe primary differences between MPLS Layer 2 and Layer 3 VPNs? (Choose two.)
A. ayer 2 VPNs use IPsec tunneling, but Layer 3 VPNs use L2TPv3 tunneling
B. ayer 2 VPNs use AToM, but Layer 3 VPNs use MPLS/BGP
C. ayer 2 VPNs use BGP, but Layer 3 VPNs use VPLS
D. ayer 2 VPNs use L2TPv3 tunneling, but Layer 3 VPNs use GRE tunneling
E. ayer 2 VPNs use IPsec tunneling, but Layer 3 VPNs use pseudowires to provide tunneling
View answer
Correct Answer: BD
Question #19
An engineer is troubleshooting an ongoing network outage. Which command should he use that candisplay the live log files for a process or service running on a network device?
A. raceroute
B. how run
C. ing
D. ebug
View answer
Correct Answer: D
Question #20
Refer to the exhibit. Which result occurs when PE1 learns a new MAC address and all three PEs are enabled with EVPN native?
A. AA system notification is sent to the network administrator that triggers the manual configuration of the new MAC address on PE2 and PE3
B. BThe new MAC address is sent by BGP to PE2 and PE3 as a Type 2 BGP route
C. CThe MAC address is entered into the CAM table and is classified for use on the native VLAN
D. DThe MAC address is entered into the CAM table only if it is learned on the native VLAN
View answer
Correct Answer: B
Question #21
Which utility can you use to validate an LSP in an MPLS environment?
A. uRPF
B. MPLS LSP ping
C. logging
D. RSVP
View answer
Correct Answer: B
Question #22
Refer to the exhibit.If the two devices are operating normally, which two conclusions can you draw from this configuration? (Choose two.)
A. CE1 must use OSPF to establish a neighbor relationship with PE1
B. PE1 labels the routes it learns from CE1 with the route-target 222:2 and shares them with its VPNv4 peers
C. PE1 labels the routes it learns from CE1 with the route-target 111:1 and shares them with its VPNv4 peers
D. The PE-CE routes between the devices are being exchanged by OSPF
E. CE1 is supporting CSC
View answer
Correct Answer: AD
Question #23
Refer to the exhibit. A customer with a single site requested additional monitoring for Ethernet connections to its service provider. Ethernet OAM has been implemented on the link between CE1 and PE2.Which command must be implemented on PE2?
A. thernet oam max-rate 8
B. thernet oam remote-loopback supported
C. thernet oam min-rate 8
D. thernet uni id 2004-20
View answer
Correct Answer: B
Question #24
Refer to the exhibit.A network engineer has been called to configure the four PE devices in order to enable full communication among the four CE devices connected to them. While starting to configure, he experienced a connectivity issue. Which two tasks should the engineer perform in order to begin the process correctly? (Choose two.)
A. Configure PE3 to export route-targets 100:1 and 200:2
B. Configure PE3 to import route-targets 100:1 and 200:2
C. Configure PE4 to import route-targets 101:1 and 202:2
D. Configure PE2 to export route-targets 300:3 and 400:4
E. Configure PE1 to import route-targets 300:3 and 400:4
View answer
Correct Answer: AB
Question #25
Which utility can you use to validate an LSP in an MPLS environment?
A. uRPF
B. MPLS LSP ping
C. logging
D. RSVP
View answer
Correct Answer: B
Question #26
Refer to the exhibit.A network engineer has been called to configure the four PE devices in order to enable full communication among the four CE devices connected to them. While starting to configure, he experienced a connectivity issue. Which two tasks should the engineer perform in order to begin the process correctly? (Choose two.)
A. Configure PE3 to export route-targets 100:1 and 200:2
B. Configure PE3 to import route-targets 100:1 and 200:2
C. Configure PE4 to import route-targets 101:1 and 202:2
D. Configure PE2 to export route-targets 300:3 and 400:4
E. Configure PE1 to import route-targets 300:3 and 400:4
View answer
Correct Answer: AB
Question #27
Refer to the exhibit. An engineer is implementing an MPLS P2MP TE solution. Which type of router can serve as the midpoint router and the tailend router in thisP2MP TE network implementation?
A. headend
B. source
C. transit
D. bud
View answer
Correct Answer: D
Question #28
Refer to the exhibit.A network engineer has been called to configure the four PE devices in order to enable full communication among the four CE devices connected to them. While starting to configure, he experienced a connectivity issue. Which two tasks should the engineer perform in order to begin the process correctly? (Choose two.)
A. Configure PE3 to export route-targets 100:1 and 200:2
B. Configure PE3 to import route-targets 100:1 and 200:2
C. Configure PE4 to import route-targets 101:1 and 202:2
D. Configure PE2 to export route-targets 300:3 and 400:4
E. Configure PE1 to import route-targets 300:3 and 400:4
View answer
Correct Answer: AB
Question #29
What do EVPN single-active and all-active have in common?
A. They are default gateway redundancy options
B. They are multihoming mechanisms used for CE devices
C. They are used to provide single connection from a CE device to a service provider
D. They are both roles that a designated router can take when MPLS is used with EVPN
View answer
Correct Answer: D
Question #30
Which tool identifies the point of failure in a P2MP LSP from the ingress LSR?
A. itter TLV
B. PAN
C. 2MP traceroute
D. 2MP ping
View answer
Correct Answer: C

View Answers after Submission

Please submit your email and WhatsApp to get the answers of questions.

Note: Please make sure your email ID and Whatsapp are valid so that you can get the correct exam results.

Email:
Whatsapp/phone number:
Contact Us


Copyright © 2024. Designer by SPOTO Official Website. All Rights Reserved.