DON'T WANT TO MISS A THING?

Certification Exam Passing Tips

Latest exam news and discount info

Curated and up-to-date by our experts

Yes, send me the newsletter

Fortinet NSE7_SDW-7.2 Certification Exam Questions & Practice Tests, Fortinet NSE 7 SD-WAN | SPOTO

Prepare effectively for the Fortinet NSE 7 - SD-WAN 7.2 certification exam with SPOTO's comprehensive exam questions and practice tests. This certification validates your proficiency in the Fortinet SD-WAN solution, evaluating your knowledge in integration, administration, troubleshooting, and central management within secure SD-WAN environments using FortiOS 7.2. SPOTO's exam questions and sample questions are meticulously designed to cover all exam topics, ensuring thorough preparation. Our practice tests simulate real exam conditions, helping you familiarize yourself with the exam format and optimize your exam performance. With SPOTO's high-quality practice tests, exam practice, and exam simulator, you'll gain the confidence and skills needed to ace the certification exam with a 100% pass rate. Trust SPOTO for top-notch resources that guarantee your success in the Fortinet NSE7_SDW-7.2 exam.
Take other online exams
Question #1
Refer to exhibits. Exhibit A shows the performance SLA exhibit B shows the SD-WAN diagnostics output. Based on the exhibits, which statement is correct?
A. Port1 became dead because no traffic was offload through the egress of port1
B. SD-WAN member interfaces are affected by the SLA state of the inactive interface
C. Both SD-WAN member interfaces have used separate SLA targets
D. The SLA state of port1 is dead after five unanswered requests by the SLA servers
View answer
Correct Answer: C
Question #2
Multiple IPsec VPNs are formed between two hub-and-spokes groups, and site-to-site between Hub 1 and Hub 2. The administrator configured ADVPN on the dual regions topology. Which two statements are correct if a user in Toronto sends traffic to London? (Choose two.)
A. Toronto needs to establish a site-to-site tunnel with Hub 2 to bypass Hub 1
B. The first packets from Toronto to London are routed through Hub 1 then to Hub 2
C. London generates an IKE information message that contains the Toronto public IP address
D. Traffic from Toronto to London triggers the dynamic negotiation of a direct site-to-site VPN
View answer
Correct Answer: AD
Question #3
Which statement about the trace evaluation by FortiGate is true?
A. Packets exceeding the configured maximum concurrent connection limit are denied by the per-IP shaper
B. The packet exceeded the configured bandwidth and was dropped based on the priority configuration
C. The packet exceeded the configured maximum bandwidth and was dropped by the shared shaper
D. Packets exceeding the configured concurrent connection limit are dropped based on the priority configuration
View answer
Correct Answer: AB
Question #4
Refer to exhibits. Exhibit A shows the traffic shaping policy and exhibit B shows the firewall policy. FortiGate is not performing traffic shaping as expected, based on the policies shown in the exhibits. To correct this traffic shaping issue on FortiGate, what configuration change must be made on which policy?
A. The URL category must be specified on the traffic shaping policy
B. The shaper mode must be applied per-IP shaper on the traffic shaping policy
C. The web filter profile must be enabled on the firewall policy
D. The application control profile must be enabled on the firewall policy
View answer
Correct Answer: C
Question #5
An administrator is troubleshooting VoIP quality issues that occur when calling external phone numbers. The SD-WAN interface on the edge FortiGate is configured with the default settings, and is using two upstream links. One link has random jitter and latency issues, and is based on a wireless connection. Which two actions must the administrator apply simultaneously on the edge FortiGate to improve VoIP quality using SD-WAN rules? (Choose two.)
A. Select the corresponding SD-WAN balancing strategy in the SD-WAN rule
B. Choose the suitable interface based on the interface cost and weight
C. Use the performance SLA targets to detect latency and jitter instantly
D. Place the troublesome link at the top of the interface preference list
E. Configure an SD-WAN rule to load balance all traffic without VoIP
View answer
Correct Answer: AC
Question #6
Which components make up the secure SD-WAN solution?
A. FortiGate, FortiManager, FortiAnalyzer, and FortiDeploy
B. Application, antivirus, and URL, and SSL inspection
C. Datacenter, branch offices, and public cloud
D. Telephone, ISDN, and telecom network
View answer
Correct Answer: C
Question #7
Based on the output shown in the exhibit, which two criteria on the SD-WAN member configuration can be used to select an outgoing interface in an SD-WAN rule? (Choose two.)
A. set cost 15
B. set source 100
C. set priority 10
D. set load-balance-mode source-ip-based
View answer
Correct Answer: A
Question #8
Which statement about the command route-tag in the SD-WAN rule is true?
A. It ensures route tags match the SD-WAN rule based on the rule order
B. It tags each route and references the tag in the routing table
C. It enables the SD-WAN rule to load balance and assign traffic with a route tag
D. It uses route tags for a BGP community and assigns the SD-WAN rules with same tag
View answer
Correct Answer: BD
Question #9
In the default SD-WAN minimum configuration, which two statements are correct when traffic matches the default implicit SD-WAN rule? (Choose two.)
A. Traffic has matched none of the FortiGate policy routes
B. Matched traffic failed RPF and was caught by the rule
C. The FIB lookup resolved interface was the SD-WAN interface
D. An absolute SD-WAN rule was defined and matched traffic
View answer
Correct Answer: AB
Question #10
Refer to exhibits. Exhibit A shows the source NAT global setting and exhibit B shows the routing table on FortiGate. Based on the exhibits, which two statements about increasing the port2 interface priority to 20 are true? (Choose two.)
A. All the existing sessions that do not use SNAT will be flushed and routed through port1
B. All the existing sessions will continue to use port2, and new sessions will use port1
C. All the existing sessions using SNAT will be flushed and routed through port1
D. All the existing sessions will be blocked from using port1 and port2
View answer
Correct Answer: C
Question #11
Based on the exhibit, which statement about FortiGate re-evaluating traffic is true?
A. The type of traffic defined and allowed on firewall policy ID 1 is UDP
B. Changes have been made on firewall policy ID 1 on FortiGate
C. Firewall policy ID 1 has source NAT disabled
D. FortiGate has terminated the session after a change on policy ID 1
View answer
Correct Answer: BC
Question #12
Which two statements about the debug output are correct? (Choose two.)
A. The debug output shows per-IP shaper values and real-time readings
B. This traffic shaper drops traffic that exceeds the set limits
C. Traffic being controlled by the traffic shaper is under 1 Kbps
D. FortiGate provides statistics and reading based on historical traffic logs
View answer
Correct Answer: CD
Question #13
What is the lnkmtd process responsible for?
A. Flushing route tags addresses
B. Monitoring links for any bandwidth saturation
C. Logging interface quality information
D. Processing performance SLA probes
View answer
Correct Answer: AB
Question #14
FortiGate has multiple dial-up VPN interfaces incoming on port1 that match only FIRST_VPN. Which two configuration changes must be made to both IPsec VPN interfaces to allow incoming connections to match all possible IPsec dial-up interfaces? (Choose two.)
A. Specify a unique peer ID for each dial-up VPN interface
B. Use different proposals are used between the interfaces
C. Configure the IKE mode to be aggressive mode
D. Use unique Diffie Hellman groups on each VPN interface
View answer
Correct Answer: B
Question #15
Which statement is correct about the SD-WAN and ADVPN?
A. Spoke support dynamic VPN as a static interface
B. Dynamic VPN is not supported as an SD-WAN interface
C. ADVPN interface can be a member of SD-WAN interface
D. Hub FortiGate is limited to use ADVPN as SD-WAN member interface
View answer
Correct Answer: CDE
Question #16
What must you configure to enable ADVPN?
A. ADVPN should only be enabled on unmanaged FortiGate devices
B. Each VPN device has a unique pre-shared key configured separately on phase one
C. The protected subnets should be set to address object to all (0
D. On the hub VPN, only the device needs additional phase one settings
View answer
Correct Answer: CD
Question #17
Refer to exhibits. Exhibit A shows the SD-WAN rules and exhibit B shows the traffic logs. The SD-WAN traffic logs reflect how FortiGate processed traffic. Which two statements about how the configured SD-WAN rules are processing traffic are true? (Choose two.)
A. The implicit rule overrides all other rules because parameters widely cover sources and destinations
B. SD-WAN rules are evaluated in the same way as firewall policies: from top to bottom
C. The All_Access_Rules rule load balances Vimeo application traffic among SD-WAN member interfaces
D. The initial session of an application goes through a learning phase in order to apply the correct rule
View answer
Correct Answer: C
Question #18
Which two statements about the status of the VPN tunnel are true? (Choose two.)
A. There are separate virtual interfaces for each dial-up client
B. VPN static routes are prevented from populating the FortiGate routing table
C. FortiGate created a single IPsec virtual interface that is shared by all clients
D. 100
View answer
Correct Answer: D

View Answers after Submission

Please submit your email and WhatsApp to get the answers of questions.

Note: Please make sure your email ID and Whatsapp are valid so that you can get the correct exam results.

Email:
Whatsapp/phone number:


Copyright © 2024. Designer by SPOTO Official Website. All Rights Reserved.