Fortinet NSE4_FGT-7.2 Certification Pracatice Questions & Mock Tests, Fortinet NSE 4 FortiOS 7.2 | SPOTO

The highly-regarded Fortinet NSE4_FGT-7.2 certification validates expertise in deploying, configuring and troubleshooting Fortinet's powerful FortiOS network security operating system. Earning this credential requires thorough preparation for the challenging certification exams. High-quality practice tests are the best material for exam preparation, allowing you to effectively reinforce your skills and knowledge. SPOTO offers a comprehensive array of Fortinet NSE4_FGT-7.2 practice questions, mock tests, exam dumps and an exam simulator containing hundreds of realistic sample questions and exam questions and answers. These invaluable online exam questions and exam materials precisely mirror the actual FortiOS 7.2 certification exams, ensuring you can identify knowledge gaps and maximize your exam readiness. Utilize SPOTO's exceptional exam practice resources, including free test opportunities, to confidently secure this elite Fortinet certification.

Take other online exams

Question #1

- (Exam Topic 2) How do you format the FortiGate flash disk?

A. Load a debug FortiOS image

B. Load the hardware test (HQIP) image

C. Execute the CLI command execute formatlogdisk

D. Select the format boot device option from the BIOS menu

View answer

Correct Answer: D

View The Updated NSE4_FGT-7.2 Exam Questions

SPOTO Provides 100% Real NSE4_FGT-7.2 Exam Questions for You to Pass Your NSE4_FGT-7.2 Exam!

Get NSE4_FGT-7.2 Practice Test

Question #2

- (Exam Topic 2) A team manager has decided that, while some members of the team need access to a particular website, the majority of the team does not Which configuration option is the most effective way to support this request?

A. Implement a web filter category override for the specified website

B. Implement a DNS filter for the specified website

C. Implement web filter quotas for the specified website

D. Implement web filter authentication for the specified website

View answer

Correct Answer: ACE

Question #3

- (Exam Topic 1) Which two statements are true about the FGCP protocol? (Choose two.)

A. Not used when FortiGate is in Transparent mode

B. Elects the primary FortiGate device

C. Runs only over the heartbeat links

D. Is used to discover FortiGate devices in different HA groups

View answer

Correct Answer: D

Question #4

- (Exam Topic 2) In which two ways can RPF checking be disabled? (Choose two )

A. Enable anti-replay in firewall policy

B. Disable the RPF check at the FortiGate interface level for the source check

C. Enable asymmetric routing

D. Disable strict-arc-check under system settings

View answer

Correct Answer: CD

Question #5

- (Exam Topic 1) Given the security fabric topology shown in the exhibit, which two statements are true? (Choose two.)

A. There are five devices that are part of the security fabric

B. Device detection is disabled on all FortiGate devices

C. This security fabric topology is a logical topology view

D. There are 19 security recommendations for the security fabric

View answer

Correct Answer: D

Question #6

- (Exam Topic 1) The exhibit contains the configuration for an SD-WAN Performance SLA, as well as the output of diagnose sys virtual-wan-link health-check. Which interface will be selected as an outgoing interface?

A. port2

B. port4

C. port3

D. port1

View answer

Correct Answer: D

Question #7

- (Exam Topic 2) Which two statements are correct regarding FortiGate HA cluster virtual IP addresses? (Choose two.)

A. Heartbeat interfaces have virtual IP addresses that are manually assigned

B. A change in the virtual IP address happens when a FortiGate device joins or leaves the cluster

C. Virtual IP addresses are used to distinguish between cluster members

D. The primary device in the cluster is always assigned IP address 169

View answer

Correct Answer: AC

Question #8

- (Exam Topic 2) Which CLI command will display sessions both from client to the proxy and from the proxy to the servers?

A. diagnose wad session list

B. diagnose wad session list | grep hook-pre&&hook-out

C. diagnose wad session list | grep hook=pre&&hook=out

D. diagnose wad session list | grep "hook=pre"&"hook=out"

View answer

Correct Answer: C

Question #9

- (Exam Topic 1) Which statement correctly describes NetAPI polling mode for the FSSO collector agent?

A. The collector agent uses a Windows API to query DCs for user logins

B. NetAPI polling can increase bandwidth usage in large networks

C. The collector agent must search security event logs

D. The NetSession Enum function is used to track user logouts

View answer

Correct Answer: D

Question #10

- (Exam Topic 1) FortiGuard categories can be overridden and defined in different categories. To create a web rating override for example.com home page, the override must be configured using a specific syntax. Which two syntaxes are correct to configure web rating for the home page? (Choose two.)

A. www

B. www

C. example

D. www

View answer

Correct Answer: B

Question #11

- (Exam Topic 1) An administrator is running a sniffer command as shown in the exhibit. Which three pieces of information are included in the sniffer output? (Choose three.)

A. Interface name

B. Ethernet header

C. IP header

D. Application header

E. Packet payload

View answer

Correct Answer: AB

Question #12

- (Exam Topic 2) The exhibit contains a network diagram, central SNAT policy, and IP pool configuration. The WAN (port1) interface has the IP address 10.200.1.1/24. The LAN (port3) interface has the IP address 10.0.1.254/24. A firewall policy is configured to allow to destinations from LAN (port3) to WAN (port1). Central NAT is enabled, so NAT settings from matching Central SNAT policies will be applied. Which IP address will be used to source NAT the traffic, if the user on Local-Client (10.0.1.10) pings t

A. 10

B. 10

C. 10

D. 10

View answer

Correct Answer: B

Question #13

- (Exam Topic 1) A network administrator wants to set up redundant IPsec VPN tunnels on FortiGate by using two IPsec VPN tunnels and static routes. * All traffic must be routed through the primary tunnel when both tunnels are up * The secondary tunnel must be used only if the primary tunnel goes down * In addition, FortiGate should be able to detect a dead tunnel to speed up tunnel failover Which two key configuration changes are needed on FortiGate to meet the design requirements? (Choose two,)

A. Configure a high distance on the static route for the primary tunnel, and a lower distance on the static route for the secondary tunnel

B. Enable Dead Peer Detection

C. Configure a lower distance on the static route for the primary tunnel, and a higher distance on the static route for the secondary tunnel

D. Enable Auto-negotiate and Autokey Keep Alive on the phase 2 configuration of both tunnels

View answer

Correct Answer: BC

Question #14

- (Exam Topic 2) View the exhibit. Which of the following statements are correct? (Choose two.)

A. This setup requires at least two firewall policies with the action set to IPsec

B. Dead peer detection must be disabled to support this type of IPsec setup

C. The TunnelB route is the primary route for reaching the remote sit

D. The TunnelA route is used only if the TunnelB VPN is down

E. This is a redundant IPsec setup

View answer

Correct Answer: CD

Question #15

- (Exam Topic 1) Which CLI command allows administrators to troubleshoot Layer 2 issues, such as an IP address conflict?

A. get system status

B. get system performance status

C. diagnose sys top

D. get system arp

View answer

Correct Answer: B

Question #16

- (Exam Topic 1) Refer to the web filter raw logs. Based on the raw logs shown in the exhibit, which statement is correct?

A. Social networking web filter category is configured with the action set to authenticate

B. The action on firewall policy ID 1 is set to warning

C. Access to the social networking web filter category was explicitly blocked to all users

D. The name of the firewall policy is all_users_web

View answer

Correct Answer: A

Question #17

- (Exam Topic 2) When a firewall policy is created, which attribute is added to the policy to support recording logs to a FortiAnalyzer or a FortiManager and improves functionality when a FortiGate is integrated with these devices?

A. Log ID

B. Universally Unique Identifier

C. Policy ID

D. Sequence ID

View answer

Correct Answer: A

Question #18

- (Exam Topic 1) An administrator does not want to report the logon events of service accounts to FortiGate. What setting on the collector agent is required to achieve this?

A. Add the support of NTLM authentication

B. Add user accounts to Active Directory (AD)

C. Add user accounts to the FortiGate group fitter

D. Add user accounts to the Ignore User List

View answer

Correct Answer: C

View The Updated Fortinet Exam Questions

SPOTO Provides 100% Real Fortinet Exam Questions for You to Pass Your Fortinet Exam!

Get Fortinet Practice Test

View Answers after Submission

Please submit your email and WhatsApp to get the answers of questions.

Note: Please make sure your email ID and Whatsapp are valid so that you can get the correct exam results.

Email:

Whatsapp/phone number:

DON'T WANT TO MISS A THING?

100% Pass Cisco, PMP, CISA, CISM, AWS Practice test on SALE!
Get Now

Fortinet NSE4_FGT-7.2 Certification Pracatice Questions & Mock Tests, Fortinet NSE 4 FortiOS 7.2 | SPOTO

View The Updated NSE4_FGT-7.2 Exam Questions

View The Updated Fortinet Exam Questions

View Answers after Submission

DON'T WANT TO MISS A THING?

100% Pass Cisco, PMP, CISA, CISM, AWS Practice test on SALE! Get Now

Fortinet NSE4_FGT-7.2 Certification Pracatice Questions & Mock Tests, Fortinet NSE 4 FortiOS 7.2 | SPOTO

View The Updated NSE4_FGT-7.2 Exam Questions

View The Updated Fortinet Exam Questions

View Answers after Submission

100% Pass Cisco, PMP, CISA, CISM, AWS Practice test on SALE!
Get Now