DON'T WANT TO MISS A THING?

Certification Exam Passing Tips

Latest exam news and discount info

Curated and up-to-date by our experts

Yes, send me the newsletter

Cisco 300-710 SNCF Exam Questions - Practice Tests, Study Guide, Dumps

Exam NameSecuring Networks with Cisco Firepower
Exam Number300-710 SNCF
Exam Price$300 USD
Number of Questions55-65
Passing Score750-850 / 1000
Exam Duration90 minutes

Preparing for the Cisco 300-710 SNCF exam requires a focused and strategic approach, especially given its significance in the field of network security. Our preparation guide is meticulously designed to encompass a wide array of exam questions, mirroring the actual test to provide a realistic practice experience. The practice questions included are specifically selected to cover all essential topics, ensuring a thorough understanding of the exam material.

In addition to the practice questions, we offer a valuable collection of dumps questions. These are crafted to give insights into the exam pattern and frequently asked concepts, offering an extra edge in your preparation. Our question-and-answer segments are tailored to enhance your learning experience, clarifying complex topics and solidifying your knowledge base.

Engaging with our well-structured practice exams allows you to assess your readiness and identify areas for improvement. Consistent practice and deep engagement with the material are crucial for excelling in the Cisco 300-710 SNCF exam. Embrace our comprehensive guide and step confidently towards achieving your certification.

 

Take other online exams
Question #1
An administrator is working on a migration from Cisco ASA to the Cisco FTD appliance and needs to test the rules without disrupting the traffic. Which policy type should be used to configure the ASA rules during this phase of the migration?
A. Prefilter
B. Intrusion
C. Access Control
D. Identity
View answer
Correct Answer: A
Question #2
An engineer has been tasked with providing disaster recovery for an organization's primary Cisco FMC. What must be done on the primary and secondary Cisco FMCs to ensure that a copy of the original corporate policy is available if the primary Cisco FMC fails?
A. Restore the primary Cisco FMC backup configuration to the secondary Cisco FMC device when the primary device fails
B. Connect the primary and secondary Cisco FMC devices with Category 6 cables of not more than 10 meters in length
C. Configure high-availability in both the primary and secondary Cisco FMCs
D. Place the active Cisco FMC device on the same trusted management network as the standby device
View answer
Correct Answer: C
Question #3
An engineer is attempting to add a new FTD device to their FMC behind a NAT device with a NAT ID of ACME001 and a password of Cisco0391521107. Which command set must be used in order to accomplish this?
A. configure manager add ACME001
B. configure manager add ACME001
C. configure manager add ACME001
D. configure manager add DONTRESOLVE AMCE001
View answer
Correct Answer: A
Question #4
A user within an organization opened a malicious file on a workstation which in turn caused a ransomware attack on the network. What should be configured within the Cisco FMC to ensure the file is tested for viruses on a sandbox system?
A. Spero analysis
B. capacity handling
C. local malware analysis
D. dynamic analysis
View answer
Correct Answer: D
Question #5
An engineer configures a network discovery policy on Cisco FMC. Upon configuration, it is noticed that excessive and misleading events are filling the database and overloading the Cisco FMC. A monitored NAT device is executing multiple updates of its operating system in a short period of time. What configuration change must be made to alleviate this issue?
A. Exclude load balancers and NAT devices
B. Leave default networks
C. Increase the number of entries on the NAT device
D. Change the method to TCP/SYN
View answer
Correct Answer: A
Question #6
What is a result of enabling Cisco FTD clustering?
A. For the dynamic routing feature, if the master unit fails, the newly elected master unit maintains all existing connections
B. Integrated Routing and Bridging is supported on the master unit
C. Site-to-site VPN functionality is limited to the master unit, and all VPN connections are dropped if the master unit fails
D. All Firepower appliances support Cisco FTD clustering
View answer
Correct Answer: C
Question #7
Which two conditions are necessary for high availability to function between two Cisco FTD devices? (Choose two.)
A. The units must be the same version
B. Both devices can be part of a different group that must be in the same domain when configured within the FMC
C. The units must be different models if they are part of the same series
D. The units must be configured only for firewall routed mode
E. The units must be the same model
View answer
Correct Answer: AE
Question #8
On the advanced tab under inline set properties, which allows interfaces to emulate a passive interface?
A. transparent inline mode
B. TAP mode
C. strict TCP enforcement
D. propagate link state
View answer
Correct Answer: D
Question #9
A network administrator notices that remote access VPN users are not reachable from inside the network. It is determined that routing is configured correctly; however, return traffic is entering the firewall but not leaving it. What is the reason for this issue?
A. A manual NAT exemption rule does not exist at the top of the NAT table
B. An external NAT IP address is not configured
C. An external NAT IP address is configured to match the wrong interface
D. An object NAT exemption rule does not exist at the top of the NAT table
View answer
Correct Answer: D
Question #10
An organization is using a Cisco FTD and Cisco ISE to perform identity-based access controls. A network administrator is analyzing the Cisco FTD events and notices that unknown user traffic is being allowed through the firewall. How should this be addressed to block the traffic while allowing legitimate user traffic?
A. Modify the Cisco ISE authorization policy to deny this access to the user
B. Modify Cisco ISE to send only legitimate usernames to the Cisco FTD
C. Add the unknown user in the Access Control Policy in Cisco FTD
D. Add the unknown user in the Malware & File Policy in Cisco FTD
View answer
Correct Answer: C
Question #11
What are the minimum requirements to deploy a managed device inline?
A. inline interfaces, security zones, MTU, and mode
B. passive interface, MTU, and mode
C. inline interfaces, MTU, and mode
D. passive interface, security zone, MTU, and mode
View answer
Correct Answer: C
Question #12
What is the difference between inline and inline tap on Cisco Firepower?
A. Inline tap mode can send a copy of the traffic to another device
B. Inline tap mode does full packet capture
C. Inline mode cannot do SSL decryption
D. Inline mode can drop malicious traffic
View answer
Correct Answer: D
Question #13
After deploying a network-monitoring tool to manage and monitor networking devices in your organization, you realize that you need to manually upload an MIB for the Cisco FMC. In which folder should you upload the MIB file?
A. /etc/sf/DCMIB
B. /sf/etc/DCEALERT
C. /etc/sf/DCEALERT
D. system/etc/DCEALERT
View answer
Correct Answer: C
Question #14
Which command is run at the CLI when logged in to an FTD unit, to determine whether the unit is managed locally or by a remote FMC server?
A. system generate-troubleshoot
B. show configuration session
C. show managers
D. show running-config | include manager
View answer
Correct Answer: C

View Answers after Submission

Please submit your email and WhatsApp to get the answers of questions.

Note: Please make sure your email ID and Whatsapp are valid so that you can get the correct exam results.

Email:
Whatsapp/phone number:


Copyright © 2024. Designer by SPOTO Official Website. All Rights Reserved.