DON'T WANT TO MISS A THING?

Certification Exam Passing Tips

Latest exam news and discount info

Curated and up-to-date by our experts

Yes, send me the newsletter

CCNA 200-301 Exam Questions | Real Exam Practice & Study Material

Getting ready for the CCNA 200-301 certification exam requires the right resources and preparation. Our CCNA 200-301 exam questions and answers provide real exam insights, helping you feel confident on exam day. With a variety of practice exams and certification practice tests, you'll gain hands-on experience that mirrors the actual exam format. The exam preparation materials we offer are tailored to cover essential topics, ensuring that you’re fully prepared. By working through our test questions and answers, along with focused exam practice questions, you’ll strengthen your understanding of key concepts. Don’t miss out on the opportunity to use free practice tests to track your progress and focus on areas needing improvement. With actual exam questions and comprehensive study material, you’ll be on the right track to success in your CCNA 200-301 exam preparation.
Take other online exams
Question #1
Which CRUD operation corresponds to the HTTP GET method?
A. reate
B. pdate
C. elete
D. ea
View answer
Correct Answer: D
Question #2
What is a feature of WPA?
A. mall Wi-Fi application
B. reshared key
C. KIP/IMC encryption
D. 02
View answer
Correct Answer: B
Question #3
Which two protocols are supported on service-port interfaces?
A. CP
B. ADIUS
C. SH
D. ACACS+
E. elne
View answer
Correct Answer: CE
Question #4
What is the role of disaggregation in controller-based networking?
A. t divides the control-plane and data-plane functions
B. t enables a network topology to quickly adjust from a ring network to a star network
C. t streamlines traffic handling by assigning individual devices to perform either Layer 2 or Layer 3 functions
D. t summarizes the routes between the core and distribution layers of the network topology
View answer
Correct Answer: A
Question #5
Which interface or port on the WLC is the default for in-band device administration and communications between the controller and access points?
A. anagement interface
B. irtual interface
C. ervice port
D. onsole por
View answer
Correct Answer: A
Question #6
What is the purpose of using First Hop Redundancy Protocol on a specific subnet?
A. orwards multicast hello messages between routers
B. ilters traffic based on destination IP addressing
C. nsures a loop-free physical topology
D. ends the default route to the hosts on a networ
View answer
Correct Answer: A
Question #7
What is the benefit of using private IPv4 addressing?
A. o be routable over an external network
B. o provide reliable connectivity between like devices
C. o shield internal network devices from external access
D. o enable secure connectivity over the Interne
View answer
Correct Answer: C
Question #8
What are two differences between optical-fiber cabling and copper cabling?
A. he data can pass through the cladding
B. BNC connector is used for fiber connections
C. iber connects to physical interfaces using RJ-45 connections
D. ight is transmitted through the core of the fiber
E. he glass core component is encased in a cladding
View answer
Correct Answer: DE
Question #9
Which security program element involves installing badge readers on data-center doors to allow workers to enter and exit based on their job roles?
A. ole-based access control
B. iometrics
C. ultifactor authentication
D. hysical access contro
View answer
Correct Answer: D
Question #10
Which two capabilities of Cisco DNA Center make it more extensible as compared to traditional campus device management?
A. ustomized versions for small, medium, and large enterprises
B. dapters that support all families of Cisco IOS software
C. EST APIS that allow for external applications to interact natively with Cisco DNA Center
D. odular design that is upgradable as needed
E. DKs that support interaction with third-party network equipmen
View answer
Correct Answer: CE
Question #11
Which statement compares traditional networks and controller-based networks?
A. nly traditional networks natively support centralized management
B. nly traditional networks offer a centralized control plane
C. raditional and controller-based networks abstract policies from device configurations
D. nly controller-based networks decouple the control plane and the data plan
View answer
Correct Answer: D
Question #12
When OSPF learns multiple paths to a network, how does it select a route?
A. t multiplies the active K values by 256 to calculate the route with the lowest metric
B. t divides a reference bandwidth of 100 Mbps by the actual bandwidth of the exiting interface to calculate the route with the lowest cost
C. t counts the number of hops between the source router and the destination to determine the route with the lowest metric
D. or each existing interface, it adds the metric from the source router to the destination to calculate the route with the lowest bandwidth
View answer
Correct Answer: B
Question #13
Which two conditions must be met before SSH operates normally on a Cisco IOS switch?
A. P routing must be enabled on the switch
B. elnet must be disabled on the switch
C. console password must be configured on the switch
D. he switch must be running a k9 (crypto) IOS image
E. he ip domain-name command must be configured on the switch
View answer
Correct Answer: DE
Question #14
Which mode must be used to configure EtherChannel between two switches without using a negotiation protocol?
A. ctive
B. esirable
C. n
D. ut
View answer
Correct Answer: C
Question #15
What is the primary effect of the spanning-tree portfast command?
A. t minimizes spanning-tree convergence time
B. t enables BPDU messages
C. t immediately enables the port in the listening state
D. t immediately puts the port into the forwarding state when the switch is reloaded
View answer
Correct Answer: A
Question #16
R1 has learned route 192.168.12.0/24 via IS-IS, OSPF, RIP, and Internal EIGRP. Under normal operating conditions, which routing protocol is installed in therouting table?
A. SPF
B. S-IS
C. IP
D. nternal EIGR
View answer
Correct Answer: D
Question #17
What makes Cisco DNA Center different from traditional network management applications and their management of networks?
A. ts modular design allows someone to implement different versions to meet the specific needs of an organization
B. t does not support high availability of management functions when operating in cluster mode
C. t abstracts policy from the actual device configuration
D. t only supports auto-discovery of network elements in a greenfield deployment
View answer
Correct Answer: C
Question #18
What are two benefits of network automation?
A. educed hardware footprint
B. educed operational costs
C. ewer network failures
D. ncreased network security
E. aster changes with more reliable result
View answer
Correct Answer: BE
Question #19
Which set of actions satisfy the requirement for multifactor authentication?
A. he user enters a user name and password, and then re-enters the credentials on a second screen
B. he user enters a PIN into an RSA token, and then enters the displayed RSA key on a login screen
C. he user swipes a key fob, then clicks through an email link
D. he user enters a user name and password, and then clicks a notification an authentication app on a mobile device
View answer
Correct Answer: D
Question #20
Which two outcomes are predictable behaviors for HSRP?
A. he two routers synchronize configurations to provide consistent packet forwarding
B. he two routers negotiate one router as the active router and the other as the standby router
C. he two routers share a virtual IP address that is used as the default gateway for devices on the LAN
D. he two routers share the same interface IP address, and default gateway traffic is load-balanced between them
E. ach router has a different IP address, both routers act as the default gateway on the LAN, and traffic is load-balanced between them
View answer
Correct Answer: BC
Question #21
Which two capabilities of Cisco DNA Center make it more extensible as compared to traditional campus device management?
A. ustomized versions for small, medium, and large enterprises
B. dapters that support all families of Cisco IOS software
C. EST APIS that allow for external applications to interact natively with Cisco DNA Center
D. odular design that is upgradable as needed
E. DKs that support interaction with third-party network equipmen
View answer
Correct Answer: CE
Question #22
An engineer must configure the IPv6 address 2001:0db8:0000:0000:0700:0003:400F:572B on the serial0/0 interface of the HQ router and wants to compress it for easier configuration. Which command must be issued on the router interface?
A. pv6 address 2001:db8::700:3:400F:572B
B. pv6 address 2001:db8:0::700:3:4F:572B
C. pv6 address 2001:0db8::7:3:4F:572B
D. pv6 address 2001::db8:0000::700:3:400F:572
View answer
Correct Answer: A
Question #23
What are two recommendations for protecting network ports from being exploited when located in an office space outside of an IT closet?
A. onfigure static ARP entries
B. nable the PortFast feature on ports
C. mplement port-based authentication
D. onfigure ports to a fixed speed
E. hut down unused port
View answer
Correct Answer: CE
Question #24
What is the role of the root port in a switched network?
A. t replaces the designated port when the designated port fails
B. t replaces the designated port when the root port fails
C. t is administratively disabled until a failover occurs
D. t is the best path to the root from a nonroot switch
View answer
Correct Answer: D
Question #25
When the active router in an HSRP group fails, what router assumes the role and forwards packets?
A. ackup
B. tandby
C. istening
D. orwardin
View answer
Correct Answer: B
Question #26
What are two advantages of implementing a controller-based architecture instead of a traditional network architecture?
A. t enables configuration task automation
B. t increases security against denial-of-service attacks
C. t provides increased scalability and management options
D. t supports complex and high-scale IP addressing schemes
E. t allows for seamless connectivity to virtual machines
View answer
Correct Answer: AC
Question #27
Which CRUD operation corresponds to the HTTP GET method?
A. reate
B. pdate
C. elete
D. ea
View answer
Correct Answer: D
Question #28
When configuring a WLAN with WPA2 PSK in the Cisco Wireless LAN Controller GUl, which two formats are available to select?
A. exadecimal
B. ecimal
C. ase64
D. SCII
E. inar
View answer
Correct Answer: AD
Question #29
What is the effect when loopback interfaces and the configured router ID are absent during the OSPF Process configuration?
A. he router ID 0
B. o router ID is set, and the OSPF protocol does not run
C. he lowest IP address is incremented by 1 and selected as the router ID
D. he highest up/up physical interface IP address is selected as the router ID
View answer
Correct Answer: D
Question #30
When a WPA2-PSK WLAN is configured in the Wireless LAN Controller, what is the minimum number of characters that is required in ASCII format?
A.
B.
C. 2
D.
View answer
Correct Answer: B
Question #31
Which field within the access-request packet is encrypted by RADIUS?
A. assword
B. uthorized services
C. uthenticator
D. sernam
View answer
Correct Answer: A
Question #32
Which WLC management connection type is vulnerable to man-in-the-middle attacks?
A. elnet
B. TTPS
C. SH
D. onsol
View answer
Correct Answer: A
Question #33
What is the definition of backdoor malware?
A. alicious code that infects a user machine and then uses that machine to send spam
B. alicious program that is used to launch other malicious programs
C. alicious code with the main purpose of downloading other malicious code
D. alicious code that is installed onto a computer to allow access by an unauthorized use
View answer
Correct Answer: D
Question #34
When a switch receives a frame for an unknown destination MAC address, how is the frame handled?
A. looded to all ports except the origination port
B. roadcast to all ports on the switch
C. orwarded to the first available port
D. nspected and dropped by the switc
View answer
Correct Answer: A
Question #35
Which HTTP status code is returned after a successful REST API request?
A. 00
B. 01
C. 04
D. 0
View answer
Correct Answer: A
Question #36
What is the same for both copper and fiber interfaces when using SFP modules?
A. hey support an inline optical attenuator to enhance signal strength
B. hey provide minimal interruption to services by being hot-swappable
C. hey offer reliable bandwidth up to 100 Mbps in half duplex mode
D. hey accommodate single-mode and multi-mode in a single modul
View answer
Correct Answer: B
Question #37
Which WPA mode uses PSK authentication?
A. ersonal
B. lient
C. nterprise
D. oca
View answer
Correct Answer: A
Question #38
What describes a northbound REST API for SDN?
A. etwork-element-facing interface for the control and data planes
B. pplication-facing interface for GET, POST, PUT, and DELETE methods
C. etwork-element-facing interface for GET, POST, PUT, and DELETE methods
D. pplication-facing interface for SNMP GET request
View answer
Correct Answer: B
Question #39
Why is UDP more suitable than TCP for applications that require low latency, such as VoIP?
A. DP reliably guarantees delivery of all packets, and TCP drops packets under heavy load
B. CP uses congestion control for efficient packet delivery, and UDP uses flow control mechanisms for the delivery of packets
C. DP uses sequencing data for packets to arrive in order, and TCP offers the capability to receive packets in random order
D. CP sends an acknowledgment for every packet that is received, and UDP operates without acknowledgments
View answer
Correct Answer: D
Question #40
What occurs when overlapping Wi-Fi channels are implemented?
A. he wireless network becomes vulnerable to unauthorized access
B. ireless devices are unable to distinguish between different SSIDs
C. etwork communications are open to eavesdropping
D. sers experience poor wireless network performance
View answer
Correct Answer: D
Question #41
How do TCP and UDP fit into a query-response model?
A. CP uses error detection for packets, and UDP uses error recovery
B. CP encourages out-of-order packet delivery, and UDP prevents re-ordering
C. CP avoids using sequencing, and UDP avoids using acknowledgments
D. CP establishes a connection prior to sending data, and UDP sends immediately
View answer
Correct Answer: D
Question #42
What is a difference between local AP mode and FlexConnect AP mode?
A. ocal AP mode causes the AP to behave as if it were an autonomous AP
B. lexConnect AP mode bridges the traffic from the AP to the WLC when local switching is configured
C. ocal AP mode creates two CAPWAP tunnels per AP to the WLC
D. lexConnect AP mode fails to function if the AP loses connectivity with the WLC
View answer
Correct Answer: C

View Answers after Submission

Please submit your email and WhatsApp to get the answers of questions.

Note: Please make sure your email ID and Whatsapp are valid so that you can get the correct exam results.

Email:
Whatsapp/phone number:


Copyright © 2024. Designer by SPOTO Official Website. All Rights Reserved.