DON'T WANT TO MISS A THING?

Certification Exam Passing Tips

Latest exam news and discount info

Curated and up-to-date by our experts

Yes, send me the newsletter

Best CCNA 200-301 Practice Exams and Exam Preparation Materials, Cisco Certified Network Associate | SPOTO

SPOTO offers the best 200-301 practice exams and exam preparation materials to ensure your success in the Cisco Certified Network Associate (CCNA) exam. Our comprehensive resources cover theoretical knowledge and practical aspects of networking, providing you with exam dumps, sample questions, and mock exams for effective preparation. Dive into our exam materials to familiarize yourself with router and switch configurations, crucial for the exam. Understanding theoretical topics is equally essential, and our exam questions and answers help solidify your grasp. With our online exam questions and exam simulator, you can simulate the testing environment and enhance your exam practice. Trust SPOTO for top-notch exam preparation, guiding you towards success in your CCNA certification journey.
Take other online exams
Question #1
Which two are NOT features of Cisco NAT implementation? (Choose two.)
A. overload
B. override
C. overrule
D. static NAT
E. dynamic NAT
View answer
Correct Answer: BC

View The Updated 200-301 Exam Questions

SPOTO Provides 100% Real 200-301 Exam Questions for You to Pass Your 200-301 Exam!

Get 200-301 Practice Test
Question #2
When transmitting to a remote destination, what two things will occur after a host has determined the IP address of the destination to which it is transmitting? (Choose two.)
A. The sending host will perform an ARP broadcast in its local subnet using the IP address of the destination host
B. The sending host will perform an ARP broadcast in its local subnet using the IP address of the local router interface
C. The local router interface will respond with the MAC address of the destination host
D. The local router interface will respond with its own MAC address
E. The destination host will respond with its own MAC address
View answer
Correct Answer: BD
Question #3
Which Cisco IOS command configures the clock rate to 64,000 bits per second on an interface?
A. clock-rate 64000
B. clock rate 64k
C. clock rate 64000
D. clockrate 64000
View answer
Correct Answer: C
Question #4
Which of the following commands sets the local router to serve as an authoritative time source?
A. ntp server
B. ntp master
C. ntp authenticate
D. ntp peer
View answer
Correct Answer: B
Question #5
Which three statements are TRUE regarding a Local Area Network (LAN)? (Choose three.)
A. A LAN is confined to one building or campus
B. A LAN can cover great distances
C. A LAN provides fast data transmission
D. A LAN is easily expandable
E. LANs require the use of a router to communicate between local hosts
View answer
Correct Answer: ACD
Question #6
What is the term used for the Ethernet communication mechanism by which hosts can send and receive data simultaneously?
A. full-duplex
B. multiplex
C. half-duplex
D. duplex
View answer
Correct Answer: A
Question #7
You are the network administrator for your company. The network at the company's office is due to be upgraded, and you have been assigned the responsibility of identifying the requirements for designing the network. You need to provide network connectivity to 200 client computers that will reside in the same sub network, and each client computer must be allocated dedicated bandwidth. Which device should you use to accomplish the task?
A. router
B. hub
C. switch
D. firewall
View answer
Correct Answer: C
Question #8
Which of the following is NOT a packet type used by Enhanced Interior Gateway Routing Protocol (EIGRP)?
A. Query
B. Reply
C. Ack
D. Response
View answer
Correct Answer: D
Question #9
Which 802.11 frame type is association response?
A. management
B. protected frame
C. action
D. control
View answer
Correct Answer: S
Question #10
Which of the following technologies allows a switch port to immediately transition to a forwarding state?
A. Rapid STP
B. PortFast
C. VTP
D. CDP
View answer
Correct Answer: B
Question #11
What is the default Administrative Distance (AD) value for an Enhanced Interior Gateway Routing Protocol (EIGRP) summary route?
A. 1
B. 5
C. 90
D. 20
View answer
Correct Answer: B
Question #12
The following is a partial output of the show interfaces command: What does the Serial 0 is up, line protocol is down statement signify in the output? (Choose all that apply.)
A. the shutdown interface command is present in the router configuration
B. a cable is unplugged
C. the interface is displaying normal operation
D. there are no problems with physical connectivity
E. there is a configuration problem in the local or remote router
View answer
Correct Answer: DE
Question #13
Which of the following statements are NOT part of the guidelines for configuring VLAN Trunking Protocol (VTP) to ensure that VLAN information is distributed to all Cisco switches in the network? (Choose all that apply.)
A. The VTP version must be the same on all switches in a VTP domain
B. The configuration revision number must be configured identically on all switches in a VTP domain
C. The VTP password must be the same on all switches in a VTP domain
D. The VTP domain name must be the same on all switches in a VTP domain
E. VLANs configured on clients should exist on the server switch
F. The switch(s) that will share VLAN information is(are) operating in VTP server mode
G. The switches must be configured to use the same method of VLAN tagging
H. The switches must be connected with trunk links
View answer
Correct Answer: BE
Question #14
You apply the following commands to a router named R2: R2(config)# interface Tunnel1 R2(config-if)# ip address 172.16.1.2 255.255.255.0 R2(config-if)# ip mtu 1400 R2(config-if)# ip tcp adjust-mss 1360 R2(config-if)# tunnel source 2.2.2.2 R2(config-if)# tunnel destination 1.1.1.1 Which statement is NOT true with regard to this configuration?
A. The physical IP address of R2 is 2
B. The connection will operate in IP mode
C. The configuration will increase packet fragmentation
D. The configuration alters the maximum segment size
View answer
Correct Answer: C
Question #15
After the switch configuration, the ping test fails between PC A and PC
B. Based on the output for switch 1, which error must be corrected?
A. The PCs are in the incorrect VLAN
B. All VLANs are not enabled on the trunk
C. Access mode is configured on the switch ports
D. There is a native VLAN mismatch
View answer
Correct Answer: C
Question #16
Which Cisco Internetwork Operating System (IOS) command is used to copy the configuration stored in Random Access Memory (RAM) to Non-Volatile Random Access Memory (NVRAM)?
A. router# copy running-config startup-config
B. router(config)# copy running-config startup-config
C. router# copy startup-config running-config
D. router(config)# copy startup-config running-config
View answer
Correct Answer: A
Question #17
Which action do the switches take on the trunk link?
A. The trunk does not form, and the ports go into an err-disabled status
B. The trunk forms, but the mismatched native VLANs are merged into a single broadcast domain
C. The trunk forms, but VLAN 99 and VLAN 999 are in a shutdown state
D. The trunk does not form, but VLAN 99 and VLAN 999 are allowed to traverse the link
View answer
Correct Answer: C
Question #18
You manage the EIGRP subnet in your organization. You have enabled EIGRP for IPv6 on all the routers in the EIGRP AS 260 using the following commands on all the routers: During verification, you discover that EIGRP for IPv6 is not running on the routers. Which of the following should be done to fix the issue?
A. The ipv6 address command should be executed in interface configuration mode
B. The ipv6 address command should be executed in router configuration mode
C. The eigrp router-id command should be executed in interface configuration mode
D. The eigrp router-id command should be executed in router configuration mode
View answer
Correct Answer: D
Question #19
Which of the following commands would allow you to determine the bandwidth of an interface?
A. show interfaces
B. show interfaces accounting
C. show cdp
D. show cdp neighbors
View answer
Correct Answer: A
Question #20
You know that Router2 is configured for RIP. Which Cisco Internetwork Operating System (IOS) command is used to view the current state of all active routing protocols?
A. show ip arp
B. debug ip rip
C. show ip protocols
D. show ip routing process
E. show arp
F. show interfaces
View answer
Correct Answer: C
Question #21
What IOS command produced the following output?
A. show interface mac
B. show mac
C. show mac-address-table
D. show ip interface
View answer
Correct Answer: C
Question #22
Which of the following is NOT a dynamic table maintained by a router running the EIGRP routing protocol?
A. topology table
B. CAM table
C. routing table
D. neighbor table
View answer
Correct Answer: B
Question #23
The workstation at 10.0.1.3 sends a packet to the workstation at 10.1.1.3. When the packet leaves the R2 router, what addresses will be located in the header? (Choose two.)
A. Source MAC bb
B. Source MAC dd
C. Source MAC ee
D. Source IP 10
E. Source IP 10
F. Source IP 10
G. Source IP 10
View answer
Correct Answer: BD
Question #24
You are considering a candidate for a job as a Cisco network technician. As part of the assessment process, you ask the candidate to write down the commands required to configure a serial interface, in the proper order with the correct command prompts. The candidate submits the set of commands shown below (line numbers are for reference only): 1 Router# configure terminal 2 Router(config)# interface S0 3 Router(config)# ip address 192.168.5.5 4 Router(config-if)# enable interface 5 Router(config-if)# descri
A. The prompt is incorrect on line 1
B. The IP address is missing a subnet mask
C. The prompt is incorrect on line 5
D. The prompt is incorrect on line 3
E. The command on line 4 is incorrect
F. The prompt is incorrect on line 4
G. The description command must be executed before the interface is enabled
View answer
Correct Answer: BDE
Question #25
Which statement explains the configuration error message that is received?
A. It belongs to a private IP address range
B. The router does not support /28 mask
C. It is a network IP address
D. It is a broadcast IP address
View answer
Correct Answer: A
Question #26
Which command provides this output?
A. show ip route
B. show cdp neighbor
C. show ip interface
D. show interface
View answer
Correct Answer: DE
Question #27
At which of the following layers of the Cisco three-tier architecture should port security be implemented?
A. Access layer
B. Distribution layer
C. Core layer
D. Edge layer
View answer
Correct Answer: A
Question #28
You have configured a router as shown in the following output: Hosts on the LAN cannot receive an IP address. What is wrong?
A. The IP address on the serial interface is incorrect
B. The default-router command in the DHCP pool is incorrect
C. An IP address needs to be configured on the FastEthernet interface
D. The NAT pool is not large enough
View answer
Correct Answer: C
Question #29
Which prefix does Router1 use to Host A?
A. 10
B. 10
C. 10
D. 10
View answer
Correct Answer: D
Question #30
The following shows the partial output of the show cdp neighbors command: DevicID Local Intrfce Holdtme Capability Platform Port ID lab-7206 Eth 0 157 R 7206VXR Fas 0/0/0 lab- as5300-1 Eth 0 163 R AS5300 Fas 0 lab-as5300- 2 Eth 0 159 R AS5300 Eth 0 lab-as5300-3 Eth 0 122 R AS5300 Eth 0 lab-as5300-4 Eth 0 132 R AS5300 Fas 0/0 lab-3621 Eth 0 140 R S 3631- telcoFas 0/0 008024 2758E0 Eth 0 132 T CAT3000 1/2 lab-400-1 Eth 0 130 r FH400 Fas 0/0 What does "r" represent in this output?
A. Router
B. Route bridge
C. Hub
D. Repeater
View answer
Correct Answer: D
Question #31
You have multiple departments sharing a common network. You are concerned about network traffic from one department reaching another department. What would be a solution for isolating the departments? (Choose all that apply.)
A. Configure separate VLANs for each department
B. Assign a unique VTP domain for each department
C. Put each department in a separate collision domain
D. Configure trunk links between departmental switches
E. Configure separate subnets for each department
View answer
Correct Answer: AE
Question #32
Which of the following statements are true when discussing link state and distance vector routing protocols? (Choose all that apply.)
A. After convergence, routing advertisements are only triggered by changes in the network with distance vector protocols
B. Packets are routed based upon the shortest path calculated by an algorithm with link state protocols
C. Only one router in an OSPF area can represent the entire topology of the network
D. Distance vector protocols send the entire routing table to a neighbor
E. Distance vector protocols send updates regarding the status of their own links to all routers in the network
F. Link-state protocols place a high demand on router resources running the link-state algorithm
G. Distance vector protocols require a hierarchical IP addressing scheme for optimal functionality
H. Link-state protocols use hello packets and LSAs from other routers to build and maintain the topological database I
View answer
Correct Answer: BDFH
Question #33
Which command enables HSRP on an interface?
A. hsrp
B. standby ip
C. standby mode hsrp
D. switchport mode hsrp
View answer
Correct Answer: B
Question #34
Which password must an engineer use to enter the enable mode?
A. adminadmin123
B. cisco123
C. default
D. testing1234
View answer
Correct Answer: C
Question #35
What configuration is needed to span a user defined Virtual LAN (VLAN) between two or more switches?
A. A VTP domain must be configured
B. VTP pruning should be enabled
C. The VTP mode of operation should be server
D. A trunk connection should be set up between the switches
View answer
Correct Answer: D
Question #36
The router interfaces for a network are configured as shown in the following exhibit. (Click the Exhibit(s) button.) Warehouse 1 is having trouble connecting to the Internet. After troubleshooting the issue, several other connectivity issues are discovered. What should you do to fix this problem?
A. Change the IP address of the Warehouse 1 LAN interface
B. Change the IP address of the Warehouse 1 WAN interface
C. Change the IP address of the Main Office LAN Interface
D. Change the IP address of the Main Office WAN interface
E. Change the IP address of the Main Office Internet interface
View answer
Correct Answer: D
Question #37
Which Cisco Internetwork Operating System (IOS) command is used to view information about Open Shortest Path First (OSPF) routing processes?
A. show ip ospf database
B. show ip ospf statistics
C. show ip ospf
D. show ip ospf traffic
View answer
Correct Answer: C
Question #38
Your network consists of one HSRP group of six routers. All of the routers are functioning properly. The network has been stable for several days. In which HSRP state are most of the routers?
A. Learn
B. Listen
C. Standby
D. Active
View answer
Correct Answer: B
Question #39
What command produced the following output?
A. show ip process
B. show ip route
C. show ip protocols
D. show ip routing process
View answer
Correct Answer: C
Question #40
Which type of route does R1 use to reach host 10.10.13.10/32?
A. default route
B. network route
C. host route
D. floating static route
View answer
Correct Answer: B
Question #41
You have successfully configured a router, but it prompts you to run Setup mode every time the router is restarted. Based on the following output, what could be causing this problem?
A. The router does not have sufficient flash memory
B. The configuration register is incorrect
C. The configuration file could not be found in NVRAM
D. The router could not locate a configuration file over the network
View answer
Correct Answer: B
Question #42
Which classful protocols perform an automatic summarization of routes when routers send updates across major classful network boundaries? (Choose two.)
A. RIPv1
B. RIPv2
C. IGRP
D. OSPF
E. EIGRP
F. BGPv4
View answer
Correct Answer: AC

View Answers after Submission

Please submit your email and WhatsApp to get the answers of questions.

Note: Please make sure your email ID and Whatsapp are valid so that you can get the correct exam results.

Email:
Whatsapp/phone number:


Copyright © 2024. Designer by SPOTO Official Website. All Rights Reserved.