Join Telegram Study Group ▷
Preface
Preparing for the CCIE lab exam nearly 4 months, I was basically TS, DIAG, CFG familiar with each test before the exam. First of all, the use of things is intended for patients with an obsessive-compulsive disorder like me.
Notepad is TXT but cannot be opened with win+R. Need to display the desktop, there is a notepad (so I guess that cisco is actually supporting you to brush the script)
About the putty paste button, I have been using the shortcut paste button. Shift+Insert. The examination room can still be used, so I have not tangled right copy, as for the font, I am strange to listen to the dog brother's words, there is no low-key in the low-key did not adjust the font.
About the keyboard and mouse, I am the No. 3 position of HK. I feel that the mouse is quite good. I also give you the CCIE mouse pad. As for the keyboard, it will be a bit hard. There is no need to explain more on the dual-screen.
TS2, DIAG H3, and CFG H3 are chosen by me in the exam. So I will share the question and answers one by one.
TS2
I have the habit of not having a second wrong point. I only have the wrong way of thinking. I feel that the second wrong point always misses something. Therefore, my TS will generally last for about 1 hour and 20 minutes. It took about an hour and 10 minutes to hand over today. Because TS is very complicated, this part of TS must be trained. This is also the old Chen, they must say more time to engage in TS, or the exam may be considered.
Q1：SW410 is configured with port security
Delete the bound mac address, re-add the address of User4's mac address to get the address, and then delete the DHCP lease of R40.
Q2: R14 ACLdeny the address of the server does not allow nat conversion, resulting in access.
After Deleting ACL10 and other questions, the TR shows * * *.I was so not lucky.
Five minutes later, the TR has shown.
Q3: there are two errors in this question.
The route-map local of the LP set by R10 is 1000. This is the same as what we practice. This is to remove the set.
Then remove the group attribute on R23, we practice here but many people in the report mentioned that this will lead to the situation where there is a group attribute even if you are.
Q4: This question is the area of 10.4.0.0/16 under Server2 tr
Do his route-map on R21 and R20 nei DC2 route-map XX out
Q5: there are two errors in this questions.
First of all, my sh dm is actually up after seeing OSPF no neighbors, I also check the interface is still UP, then check the interface R14 less ip nhrp map mu dy, plus immediately R60 becomes IKE R50ospf up, then put R50 The crypto corresponds to the brush on 60.
DIAG H3
Q1: even if the solution is the same as the SPOTO’s, the answers are more than the SPOTO.
·question1: Bootp screening is…………….
·the second question is so difficult，i just knew the address………..
·the error is SW1-SW3
Q2： I am terrible with the first questions. because the DIAG needs 4 scores.
·the second question is so difficult for me.
CFG H3
The standard of the volume: all the big phenomena are made, and the small phenomenon of each question is consistent. Can hand over the SW600 long ping 100,000 packages to celebrate (also to prevent Eric from doing things) A very important principle of H3 is: pre-matching is not mismatched, only unmatched.
The configuration is consistent with the ones provided by SPOTO, no longer repeat them, and SPOTO is very stable. As long as you are careful in the examination room, there is absolutely no problem. Here is a detailed description of the inspection ideas after the completion of the various pits in H3.
Section1
1、all vlan2000..................all need to make up one by one and finally knock on no sh, and another test table SW300/301/400/401/500/501 has this one.................. Point everyone must look carefully at the form he gave you according to his form
2, port-channel 500/501/510 this area to pay attention to, when we practice a little bit different, but you do a little problem according to the 2 layer map given, insurance to do between the shutdown interface, after all, no sh. Looking at po1 po2 up, my heart is safe.
Section2
1. I have a lot of pre-matches I got today. I have noticed that there is no strange thing in the route-id. The next-hop-s is there. Of course, for the sake of safety, if he has a full brush,.....................
2, in particular, the following areas are missing...................
3, multicast may have individual equipment did not start IP multicast-routing and interface, anyway, I am not open to open it, I re-brushed, I did not see the multicast I saw today... After completing the first question, the next four devices are filtered, and then the second question is multicast. It can be realized free of RP, appearing once. The RP cleanup command is cle ip pim rp.
In addition, I saw in the pre-match, R1's lo1 port has no address, do not care. ............,. So I didn't care about 14.15.12. This is what the old Chen simulation test gave me, and I didn't add it.
There is a very slow convergence R51 for R60 DMVPN settings local is 102 I knocked up for a long time or go R50local101 is not out of 102 lp after re-brushing hard clear and came out.
The other questions are the same as the SPOTO’s exam answers and questions.
Section3
3.1 (neighbor of ipv4+vpnv4)
Don't worry about looking at the picture to solve everything. Remember to fill in the RD values of the vrf of R3, R4, R5, and R6 (this value is the same as Sibo). You should pay attention to the table.
(2) 3.2+DMVPN exchange visits
There is nothing to say about this, as mentioned in other battle reports, in R..................
(3) 3.3
The questions are the same as the SPOTO’s solution.
(4)3.4
User7 can ping server2, R24 show crypto session, you can see that the stream of interest is matching.
What I got today is that Crypto's ACL is not pre-matched, completely flustered, .... is also listening to the dog brother and Lao Chen regardless of him
Section4-5
The section is the same as the SPOTO’s solution. But my last one except for the small problem, HSRP configuration ac is always on the SW300, the priority is also configured, sh and no sh interface is not good, and finally put a big move to get.
Conclusion
1、All operations must be developed into habits. Before you point to X, look at the wr after you have no end, don't do wr. Knock an end.
2、CFG: the big phenomenon is all out, the small phenomenon of each question is all consistent
Finally, I have passed the exam successfully, and best wishes to you! I want to thanks my families' support and the help of SPOTO. I strongly recommend SPOTO for you.
