Join Telegram Study Group ▷
The answer to this question is YES! SPOTO Study Materials would be just enough for clearing the CCIE Routing and Switching Lab Examination and I am talking with my personal experience.
I decided 3 years before to the lab that I was going to finish my CCIE qualification. My role would have been mostly routing and switching, so that track made the most sense to pursue. After looking at the blueprint, I found that there were lots of technologies that I barely understood are included in it, at an expert level. Multicast, MPLS L3VPN, IS-IS had I even touched the surface of this protocol. It didn’t look like I would have. So, either I have to learn it all, word by word or I might have to find another way to cut it short.
The first CCIE study material I invested was a total waste of time and money. I thought 100 hours of video, probably the same amount in workbooks would be helping me out to clear my Exam, but it didn't.
Yes, there was about 100 hours in videos, which I spend watching thoroughly. I spent even more while I was taking notes while watching the videos. I even created flash cards and memorized the same. Also in one of the early videos, and throughout the series, there would be a lot of recommended reading. Obviously, I didn’t read each and every page in every book. Finishing this course took me quite a long time. Also, I did watch many videos more than once some of them even thrice to get a better understanding.
While I was struggling through the old materials, a friend of mine who have just completed his CCIE R&S Lab Exam, suggested me the CCIE R&S Lab Prep Courses offered by the SPOTO. After I check out through the internet and after all the researches, which I have done, I found out that there are tons of success stories related to the SPOTO. I even check out their website interface. They have excellent customer support and quite nice prep courses, for all the needs of the customers. I even check out that they are providing these study dumps for a good long 16 years. And not only they excel in the Cisco Certifications, but also in lots of other IT certification programs like the AWS, CISSP, Red Hat and lots more.
So, I decided to give it a try. I purchased their products and it arrived within eight hours after I made payment. It arrived with a good study plan according to which I was able to complete my CCIE R&S Lab online training within 12 weeks. All I had to do was to practice with their lab materials just 3 hours per day. I even gain the assistance of Tutors and services which have assisted me along with the whole preparation. I received workbooks for each and every module as well as their solutions, and videos tutorial.
I watched the videos first, and later practice on the materials. My study plan included the following phases:
Phase 1: 2 weeks to practice H2 CFG
Phase 2: 2 weeks to practice TS1
Phase 3: 2 weeks to practice CFG H1, H1
Phase 4: 5 days to practice all incidents of TS2
Phase 5: 2 days to practice DIAG
Phase 6: 1 week to practice CFG H2+
Phase 7: I was even granted access to H3 CFG+, TS2 new faults after I have competed phase1 to phase6
Phase 8: 2 weeks to review
Phase9: They have also provided a DIAG VCE test 10 days before your Lab exam
So, finally, I was able to complete my CCIE R&S Lab Exam and have acquired the accreditation of being certified with the CCIE Routing and Switching Certification. Thus, I would recommend you to not to waste your time and money on the worthless products and acquire the best and valid products which are offered by the SPOTO, definitely, it would be just enough to pass your CCIE R&S Lab Exam.
