How to Pass the CCIE Security Lab Exam?

Achieving the CCIE Security Certification in the first trial might not be proved to be an easy target, even Cisco states that many candidates who have cleared the CCIE Security exam in their second or third trial. And passing CCIE security might even take more than three to four attempts for an individual to go through it, unless you have some good training courses, like that offered by the SPOTO.

This might be because many candidates overlooked the basics and take CCIE certification quite light whereas the situation varies. When they appear in the eight hours lab test after clearing their written exam, they find the odds quite simply against them. So if you really wish to clear this CCIE security lab exam in your first try, you are advised to prepare yourself thoroughly and don't go for the first attempt, unless you are confident and fully prepared for this lab exam.

Preparation would be quite easy but it would require certain commitment as well as dedication to work. The candidate should love his work and should have knowledge about what he is doing. The candidates are even required to make desired targets and break them down into small but achievable goals. Time management would be considered to be very important for a CCIE Security prospective professional. The candidate shouldn’t waste their time and start preparing for the CCIE Security lab test right after they clear their written exam. Without wasting time and sticking to your objective would be leading you to clear thisCCIE security lab exam even in the first try.

The CCIE security lab exam would be consisting of three main modules.

The first one would be the Troubleshooting, the second is Diagnostic and the third one would be the Configuration which would take up to eight hours. These eight hours would be a total time which would be further segregated to two hours for troubleshooting module, one hour time would be given for the diagnostic module and the rest would be totally dedicated to the configuration module. The candidates would be required in order to finish it every module so as to move into the next module with no options of going back. However, there would be a thirty minutes time relaxation in the first module that you could borrow the time from the last module time. Those who would be saving time and move out quickly to the second module, you could then add the remaining time to their configuration module. No relaxation of adjustment would be given in a diagnostic module, which would be only limited to one hour time. In order to successfully go through these modules, the candidates are required to perfect with these following skills;

•    Verifying the network security issues as well as time to resolve them.

•    Troubleshooting the issues of any Cisco-related technologies and products.

•    Perceiving the network issues as well as discerning them by analyzing symptoms.

•    Identifying the root cause by correlating the information which would be gathered from different sources without having access to the devices.

•    Designing and Designing optimizing security solutions.

•    Bridging traffic flaws and understanding technology architecture.

The passing criteria for CCIE security lab exam would be considered quite tough though those who have started preparing themselves for the aforementioned skills which would surely have chances to pass this lab exam in their first trial. They would only have to ensure that they would be clear in each module of the lab exam. So here’s an advice for those who are preparing themselves for taking this lab exam and willing to clear it in their first trial, make a list of these valuables and stick to it till the finish.

So, it would be recommended for you to gain the training which would be provided SPOTO, along with the passing guarantee.