Join Telegram Study Group ▷
No doubt the journey of becoming CCIE Routing and Switching would be certified as a professional which would require a lot of dedication, commitment and money as well. However, in addition to these 3, you are required to step forward in the right direction for achieving success. Millions of Cisco candidates are going to lack proper direction and thus they fail to achieve their goal. In this article, you would be revealed the secret and guide you on CCIE R&S exams preparation. Here are some tips, to clear CCIE R&S exams.
1. Finding a Right CCIE R&S Training Institute:
One of the common mistakes which would be committed by millions of Cisco aspirants is to select the Best CCIE R&S Training Institute. Remember, quality training is considered to be the basic key to success. There are over 10,000 Cisco training companies across the world, but only a few of the companies are such that could actually help you out to clear the CCIE R&S lab exam. Certain institutions like the SPOTO delivers about 90% clearing rate for all the Cisco related certification in the first attempt.
2. Get Yourself Trained by CCIE Certified Trainers Only:
You would have to learn from the CCIE certified trainers as they could guide you in the best possible way. And that’s why a right training institute or trainer likes the SPOTO, which would be considered as the key to CCIE R&S Success. You are required to remember, learning from the CCIE R&S certified trainer is the best part as they would have gone through the same road.
3. Taking Mock Exams before Real One:
Once you would have to complete your CCIE R&S training course, you should undertake a quick revision, so as to brush up your skills and go for mock CCIE R&S exams. This would be making you ready for questions as well as a practical exam. You could improve time management, learn to do configurations master and faster the Questions & Answers with each mock exam.
4. Practicing on Real Lab Infrastructure:
Practice makes & would be making you perfectly ready for CCIE exams. CCIE exams have 8 hrs. CCIE R&S lab exam and there your actual skill level would be tested. That’s why practical training on real devices is considered as a must-have. Avoid the utilization of simulators for practical, that’s why lab infrastructure is a key factor while choosing a Cisco CCIE R&S training institute.
5. Focus on Developing Expertise:
CCIE R&S Certification is considered about 360-degree knowledge of technology. In fact, CCIE R&S exams would be designed to test a candidate’s expertise practically as well as theoretically. So gaining expertise in CCIE R&S modules or configurations is considered quite okay, it could be only done by daily training as well as practical of the same module. Ideally, you are required to spend 8 to 9 hours daily if possible.
6. Managing Time, Speed & Know the References:
You would be needed to have hands-on technical skills and great speed for clearing CCIE R&S lab examination in a single go. The topologies and concepts are quite hard, thus, it is quite advisable to start at a very slow pace and achieve good speed. Time management in the exam would be considered as the key and it is an open book exam so the attendee is required to know the right references for commands as well as for instructions.
In order to achieve this certification, you are required to have good training which you could gain by having the training courses, which would be provided by the SPOTO.
