Talk about Cisco CCIE-RS LAB test experience.

CCNA 200-301

CCNA 200-301

CCNP Enterprise

CCNP Enterprise

CCNP Security

CCNP Security

CCIE Enterprise Lab

CCIE Enterprise Lab

CCIE Security Lab

CCIE Security Lab

CCNP Service Provider

CCNP Service Provider

CCNP Data Center

CCNP Data Center

CCNP Collaboration

CCNP Collaboration

CCIE DC Lab

CCIE DC Lab

ic_r
ic_l
Talk about Cisco CCIE-RS LAB test experience.
images

1.Preparation timetable

In December 2017, I took the written test and started preparing for the test. At the beginning of April, I took the exam on May 17.SPOTO helped tens of thousands of candidates achieve their Cisco CCNA, CCNP, CCIE, CISSP certification. Subscribe us and get the more news.

2.Simply share the test preparation experience

The theoretical basis should be solid, IE must be seen (BGP, IPsec, MPLS configuration, inspection methods should be proficient, IPV6 can be selectively viewed). Then start to prepare the version, C1 starts, it is recommended to look at the video explanation of C1, form your own ideas, be good at summing up when preparing the version, sum up the rules of each version, and the knowledge points of each section. The version should be familiar with the generation and delivery process of each route. TS first suggests to look at the test effect diagram, and then check it by yourself, compare it with the solution, and leave enough time to study the generation of the routing entries in the test renderings, the diagnosis of the delivery process, directly Back, the version preparation process will definitely have a lot of mistakes. If you encounter an error, try to check it yourself. If you can't check it out, then go for help. When you ask for help, you should see how others are troubleshooting. Study his ideas for troubleshooting, version requirements, TS. And the version renderings must be carefully studied! Version requirements, TS and version renderings must be carefully studied! Version requirements, TS and version renderings must be carefully studied! The important thing is said three times!

3.Examination situation

TS1+, the same as the solution given by the organization, only R15 is not highlighted in the DMVPN of R15; D3+, the package of the bootp has just been found, the link at the bottom of the first page, and then there will be interference items in the option, so To remember the answer is very accurate; C3, R100 has a loopback address 10.4.42.42, I directly put the loopback no, do not learn me, direct shutdown interface is OK; other according to the solution is OK, raise In order to knock out the habit of writting wr, control the speed when the exam, when there are conditions, knock more, think without any conditions, what is the examination of each small section, what order should be knocked, let me squat, share The time taken for each version to be knocked out: C1/C1+: about 90min, C2/C2+: should be lost one bit slower than C1, C3: less than 80min.

Finally, I wish SPOTO's brothers and sisters work smoothly, and the exams will be successful. Please contact us to learn from each other and improve.