How long is the CCIE Routing and Switching Lab Examination?

In order to understand the intensity of this exam, you are first needed to understand certain facts about the CCIE Routing and Switching Lab Examination. 

Introduction:

The CCIE Routing and Switching v5.0 Lab exam is the culmination of successfully clearing the written qualifying exam and, within 18 months, you are going to make the first attempt at clearing the Lab exam to obtain your CCIE numbers. In 1999, one of my friends had taken the pleasure of taking his first CCIE Routing and Switching Lab exam. Obviously, the sets of technology were significantly different from what we may find in today’s lab exam. We could sit and debate for hours about the difficulty of the exam that was taken previously and today’s lab exam, but it isn’t going to help you out in preparing for their lab! The current CCIE Lab Exam represents a more than 20 years stretch of setting the effective standard for the industry about what an expert-level certification is going to entail.

The CCIE Routing and Switching exam series, consisting of Written and Lab exam have recently been revised to v5.0. The exam is going to cover Layer 2 Technologies, Layer 3 Technologies, Infrastructure Security, Infrastructure Services and VPN Technologies. There are many details within each of those broad topic areas, and of course, being an expert-level exam, you may find that the level of detail to be quite extreme. The only part that is present in the written exam but not the lab is the Network Principles.

How long is the Exam?

The exam is going to be presented in three different sections.

· Troubleshooting,

·Diagnostics and

·Configuration.

The Troubleshooting section is offered as a form of trouble tickets on a preconfigured network. You would need to isolate the problem within a large topology and identify and fix the issues that are at hand. There may be more than 30 devices within the network topology and about 10 to 12 trouble tickets to work with.

The Diagnostic section would present you with issues with a lot of exhibit like reading or reference material and questions in order to isolate your thought process. There is no actual configuration that is present during this section, merely actions of what you see, what you believe, and what you would do next would be tested.

The configuration section has instructions that are generally followed with the high-level blueprint outline, although you may have selected any number of detail items within. If you are going to sit the CCIE Lab more than once, your exams may be completely different from the one which you have given.

Number of Questions:

The numbers of questions are going to vary based on exams. It is not quite as relevant an issue as it was earlier used to be. The trouble tickets would still be 10 to 12 within a 2-hour period. Diagnostic questions would be fewer questions because you have 30 minutes. In addition, you would be having a sliding window between Troubleshooting and Configuration of 30 minutes. So, you can borrow time in either direction if you need to do it. The Diagnostic section will always be fixed at an interval of the 30-minutes time period.

So, here you have gained the knowledge about the CCIE Routing and Switching Lab Exam, so you would now start your preparation, whenever you are comfortable to do it. If you want to have this certification without any trouble, I would recommend referring to the SPOTO Club’s Study Dumps.