Cisco Systems offers the CCNP Service Provider certification, demonstrating competency with advanced configuration and management of service provider networks. The CCNP Service Provider certification is respected and challenging to obtain.
In order to get the CCNP 350-501 Service Provider certification, the CCNP 350-501 dumps and training you need will be provided by SPOTO. Now, evaluate yourself by using the demos below. If you require more 350-501 exam dumps, please get in touch with us for the best price.
Question 1
What is the function of Cisco NFV infrastructure platform?
A. It offers decentralized logging.
B. It offers consistent performance.
C. It does not have a security audit feature.
D. It does not offer high availability.
Correct Answer: B
Question 2
Which function does RSVP perform in a Cisco MPLS TE environment?
A. It reserves the bandwidth along the path between the head-end and tail-end router.
B. It signals to LDP protocol along the path that a Cisco MPLS TE will be configured.
C. It reserves bandwidth for LDP sessions between routers participating in a Cisco MPLS TE.
D. It establishes targeted LDP sessions between neighbors that are directly connected.
Correct Answer: A
Question 3
While an engineer deploys a new Cisco device to redistribute routes from OSPF to BGP, they notice that not all OSPF routes are getting advertised into BGP. Which action must the engineer perform so that the device allows O, OIA, OE1 and OE2 OSPF routes into other protocols?
A. Configure the keyword nssa in the redistribution entry.
B. Configure the keywords internal and external in the redistribution entry.
C. Configure the synchronization keyword in the global BGP configuration.
D. Configure the device to pass only O and E2 routes through it.
Correct Answer: B
Question 4
A new PE router is configured to run OSPF as an IGP with LDP on all interfaces. The engineer is trying to prevent black holes after convergence when the PE device loses an LDP session with other PE routers. Which action must the engineer take to implement LDP session protection on a new PE router?
A. Configure the mpls ldp session protection and mpls label protocol ldp commands on the new PE router that connect to the CE routers.
B. Configure the new PE router with the mpls ldp session protection command on interfaces with directly connected neighbors.
C. Configure the new PE router with the mpls ldp session protection command and on neighboring routers that connect to this new PE router.
D. Configure the mpls ldp discovery targeted-hello accept and mpls ldp session protection commands on the interfaces on the new PE router that connect to the CE routers.
Correct Answer: C
Question 5
Which two features describe TI-LFA? (Choose two.)
A. TI-LFA leverages the post-convergence path that carries data traffic after a failure.
B. Unlike RLFA TI-LFA works without the PQ node and provides double segment failure protection
C. Tl-LFA uses PQ or P and Q nodes on the post-convergence path to compute the backup path.
D. TI-LFA works with point of local repair when the PQ node supports only LDP capability.
E. Post-convergence, T-LFA considers the next-hop neighbor to calculate the backup repair path.
Correct Answer: AC
Question 6
What is a characteristic of MVPN?
A. It creates GRE tunnels to route multicast traffic over a service provider IP core.
B. It allows VRF traffic to use the service provider MPLS VPN to route multicast traffic.
C. It uses pseudowires to route unicast and broadcast traffic over either a service provider MPLS or IP core.
D. It bypasses the use of MPLS in the service provider core and transmits packets using IP only.
Correct Answer: B
Question 7
How is a telemetry session established for data analytics?
A. A destination initiates a session to a router.
B. A router initiates a session using the dial-out mode to a destination.
C. The destination initiates a session using the dial-out mode to the router.
D. A router requests the data using Telnet
Correct Answer: B
Question 8
An engineer must implement QoS to prioritize traffic that requires better service throughout the network. The engineer stated by configuring a class map to identify the high-priority traffic. Which additional tasks must the engineer perform to implement the new QoS policy?
A. Attach the class map to a policy map that designates the action to be taken on the classified traffic and then attach the policy map to an interface using a service policy.
B. Attach the class map to a policy map that sets the minimum bandwidth allocated to the classified traffic and designates the action to be taken on the traffic.
C. Attach the class map to a policy map within a VRF to segregate the high-priority traffic and then attach the policy map to an interface in another VRF.
D. Create a route map to manipulate the routes that are entered into the routing table and then attach the route map to an interface using a service policy.
Correct Answer: A
Question 9
What is the role of NSO?
A. Maintains data storage.
B. Provides public cloud services for customers that need Internet access.
C. Provides network monitoring services for Layer 3 devices.
D. Controls the turn-up of a device.
Correct Answer: D
Question 10
A network engineer is configuring RIP as the routing protocol between multiple PEs and CEs. The engineer must avoid advertising the same routes back to their sources. Which action should be performed on the routers to accomplish this task?
A. Configure a different route distinguisher for each prefix.
B. Enable bidirectional forwarding detection on each device.
C. Define VRFs on each device to separate the traffic.
D. Define the site of origin on each interface.
Correct Answer: D
Conclusion
It is normal to feel tense, but this sensation will pass away once you study diligently, and practice more than 90% demos on the 350-501 SPCOR, and then you’ll secure an incredible result on the actual exam. This is a test that, if passed, will alter the track of your life. You’ll almost certainly have a better chance of obtaining work, and you’ll also receive a raise in compensation.
