DON'T WANT TO MISS A THING?

Certification Exam Passing Tips

Latest exam news and discount info

Curated and up-to-date by our experts

Yes, send me the newsletter

VMware 3V0-42.23 Exam Questions and Answers, VMware NSX 4.X Advanced Design | SPOTO

SPOTO's latest exam dumps on the homepage, with a 100% pass rate! SPOTO delivers authentic Cisco CCNA, CCNP study materials, CCIE Lab solutions, PMP, CISA, CISM, AWS, and Palo Alto exam dumps. Our comprehensive study materials are meticulously aligned with the latest exam objectives. With a proven track record, we have enabled thousands of candidates worldwide to pass their IT certifications on their first attempt. Over the past 20+ years, SPOTO has successfully placed numerous IT professionals in Fortune 500 companies.
Take other online exams
Question #1
When designing for growth in edge clusters, what is important?
A. Allow for flexible scaling of resources and services
B. Permanently fix resources at the time of initial deployment
C. Focus exclusively on immediate needs, ignoring future growth
D. Prioritize aesthetic considerations in the data center
View answer
Correct Answer: A
Question #2
What selection is the key design benefit provided by a dedicated Edge Cluster VM or Bare Metal? (Choose the best answer.)
A. reduced administrative overhead
B. predictable network performance
C. multiple Tier-0 gateways per Edge Node Cluster
D. support for Edge Node Clusters with more than 10 Edge Nodes
View answer
Correct Answer: B
Question #3
An architect is helping an organization with the Conceptual Design of an NSX-T Data Center solution. This information was gathered by the architect during the Discover Task of the Enagagement Lifecycle: ? There are applications which use IPv6 addressing. ? Network administrators are not familiar with NSX-T Data Center solutions. ? Hosts can only be configured with two physical NICs. ? There is an existing management cluster to deploy the NSX-T components. ? Dynamic routing should be configured between the p
A. Dynamic routing should be configured between the physical and virtual network
B. There are applications which use IPv6 addressing
C. Hosts can only be configured with two physical NICs
D. There are enough CPU and memory resources in the existing management cluster
View answer
Correct Answer: A
Question #4
What are the benefits of Receive Side Scaling and Geneve Rx Filters? (Choose two)
A. Improved packet processing efficiency
B. Enhanced network throughput
C. Increased virtual machine storage capacity
D. Brighter display on virtual desktop interfaces
View answer
Correct Answer: AB
Question #5
Identifying customers’ requirements is crucial for?
A. Tailoring the solution to meet specific needs
B. Deciding the office decor
C. Planning the company picnic
D. Setting up the company's social media profiles
View answer
Correct Answer: A
Question #6
An architect is helping an organization with the Physical Design of an NSX-T Data Center solution. This information was gathered during a workshop: ? Some workloads should be moved to a Cloud Provider. ? Extend network's VLAN or VNI across sites on the same broadcast domain. ? Enable VM mobility use cases such as migration and disaster recovery without IP address changes. ? Support 1500 byte MTU between sites. Which selection should the architect include in their design? (Choose the best answer.)
A. Load Balancer
B. Reflexive NAT
C. SSL VPN
D. L2 VPN
View answer
Correct Answer: D
Question #7
Conceptual design in VMware environments refers to?
A. The brand logo design
B. The high-level overview and strategy
C. The choice of office furniture
D. The design of marketing materials
View answer
Correct Answer: B
Question #8
An architect is helping an organization with the Logical Design of an NSX-T Data Center solution. This information was gathered during the Assessment Phase: ? There is a performance based SLA for East "" West traffic. ? The business critical applications require prioritization of their traffic. ? One of the services is a file share and has a high demand for bandwidth. Which selection should the architect include in their design? (Choose the best answer.)
A. Review average North/South traffic from the core switches and firewall
B. Include a segment QoS profile and review the impact of utilizing this feature
C. Meet with the organizationa€?s application team to get additional information
D. Monitor East-West traffic throughout normal business cycles
View answer
Correct Answer: B
Question #9
An architect is helping an organization with the Logical Design of an NSX-T Data Center solution. This information was gathered during the Assessment Phase: ? Customer currently has a single 10 host vSphere cluster. ? Customer wants to improve network security and automation. ? Current cluster utilization and business policies prevent changing the existing vSphere deployment. ? High-availability is important to the customer. Which three selections should the architect include in their design? (Choose three.
A. Apply vSphere DRS VM-Host anti-affinity rules to the virtual machines of the NSX-T Edge cluster
B. Deploy at least two NSX-T Edge virtual machines in the vSphere cluster
C. Deploy the NSX Controllers in the management cluster
D. Apply vSphere Distributed Resource Scheduler (vSphere DRS) VM-Host anti-affinity rules to NSX Managers
E. Remove 2 hosts from the cluster and create a new edge cluster
F. Remove vSphere DRS VM-Host affinity rules to the NSX-T Controller VMs
View answer
Correct Answer: ACE
Question #10
Which is a family of solutions for data center designs that span compute, storage, networking, and management, serving as a blueprint for a customer's Software Defined Data Center (SDDC) implementations? (Choose the best answer.)
A. VMware SDDC Design
B. VMware Validated Design
C. VMware POC Design
D. VMware Cloud Foundation
View answer
Correct Answer: B
Question #11
An architect is helping an organization with the Physical Design of an NSX-T Data Center solution. This information was gathered during a workshop: ? There are six hosts and hardware has already been purchased. ? Customer is planning a collapsed Management/Edge/Compute cluster. ? Each host has two 10Gb NICs connected to a pair of switches. ? There should be no single point of failure in any proposed design. Which virtual switch design should the architect recommend to the organization? (Choose the best answ
A. Create a vSphere Distributed Switch (vDS) for Management VMkernel traffic and assign one NIC
B. Create an NSX-T Virtual Distributed Switch (N-VDS) for Management VMkernel traffic and assign one NIC
C. Create an NSX-T Virtual Distributed Switch (N-VDS) for Management VMKernel and overlay traffic and assign both NICs
D. Create an NSX-T Virtual Distributed Switch (N-VDS) for Management VMkernel and overlay traffic and assign a new virtual NIC
View answer
Correct Answer: C
Question #12
An architect is helping an organization with the Physical Design of an NSX-T Data Center solution. This information was gathered during a workshop: ? Some workloads should be moved to a Cloud Provider. ? Extend network's VLAN or VNI across sites on the same broadcast domain. ? Enable VM mobility use cases such as migration and disaster recovery without IP address changes. ? Support 1500 byte MTU between sites. Which selection should the architect include in their design? (Choose the best answer.)
A. Load Balancer
B. Reflexive NAT
C. SSL VPN
D. L2 VPN
View answer
Correct Answer: D
Question #13
Which is a family of solutions for data center designs that span compute, storage, networking, and management, serving as a blueprint for a customer's Software Defined Data Center (SDDC) implementations? (Choose the best answer.)
A. VMware SDDC Design
B. VMware Validated Design
C. VMware POC Design
D. VMware Cloud Foundation
View answer
Correct Answer: B
Question #14
What should growth patterns for edge clusters consider? (Choose two)
A. Future network traffic projections
B. Anticipated services to be added
C. The availability of IPv4 addresses
D. The brand of hardware in use
View answer
Correct Answer: AB
Question #15
Which three IPv6 features are supported in an NSX-T Data Center design? (Choose three.)
A. IPv6 OSPF
B. IPv6 static routing
C. IPv6 switch security
D. IPv6 DNS
E. IPv6 Distributed Firewall
F. IPv6 VXLAN
View answer
Correct Answer: BCE
Question #16
Which NSX-T feature is used to allocate the network bandwidth to business-critical applications and to resolve situations where several types of traffic compete for common resources? (Choose the best answer.)
A. Network I/O Control Profiles
B. LLDP Profile
C. LAG Uplink Profile
D. Transport Node Profiles
View answer
Correct Answer: A
Question #17
Which three IPv6 features are supported in an NSX-T Data Center design? (Choose three.)
A. IPv6 OSPF
B. IPv6 static routing
C. IPv6 switch security
D. IPv6 DNS
E. IPv6 Distributed Firewall
F. IPv6 VXLAN
View answer
Correct Answer: BCE
Question #18
A best practices for securing a VMware ESXi host are?
A. Regularly updating the ESXi host firmware
B. Installing video games on the host
C. Disabling unnecessary services and ports
D. Creating a social media page for the host
View answer
Correct Answer: AC
Question #19
How do enterprise and service provider NSX designs typically differ?
A. By the color scheme of the UI
B. Enterprise designs focus more on internal data center optimizations
C. Service provider designs prioritize multi-tenancy and scalability
D. There are no significant differences
View answer
Correct Answer: BC
Question #20
An architect is helping an organization with the Physical Design of an NSX-T Data Center solution. This information was gathered during a workshop: ? There are six hosts and hardware has already been purchased. ? Customer is planning a collapsed Management/Edge/Compute cluster. ? Each host has two 10Gb NICs connected to a pair of switches. ? There should be no single point of failure in any proposed design. Which virtual switch design should the architect recommend to the organization? (Choose the best answ
A. Create a vSphere Distributed Switch (vDS) for Management VMkernel traffic and assign one NIC
B. Create an NSX-T Virtual Distributed Switch (N-VDS) for Management VMkernel traffic and assign one NIC
C. Create an NSX-T Virtual Distributed Switch (N-VDS) for Management VMKernel and overlay traffic and assign both NICs
D. Create an NSX-T Virtual Distributed Switch (N-VDS) for Management VMkernel and overlay traffic and assign a new virtual NIC
View answer
Correct Answer: C
Question #21
Which two benefits can be achieved using in-band management of an NSX Bare Metal Edge Node? (Choose two.)
A. Reduces storage requirements
B. Reduces cost
C. Preserves packet locality
D. Reduces egress data
E. Preserves switchports
View answer
Correct Answer: BD
Question #22
Why are L2 bridging services used in NSX Edge designs?
A. To replace the need for physical routers entirely
B. To connect virtual and physical workloads without changing the IP scheme
C. To simplify firewall rules by bypassing them
D. To ensure that all traffic passes through a single choke point for monitoring
View answer
Correct Answer: B
Question #23
Which factors must be considered when designing a VMware solution? (Choose two)
A. The color of the server racks
B. Storage capacity
C. Network latency
D. The brand of servers
View answer
Correct Answer: BC
Question #24
What are the main elements in the NSX architecture?
A. Physical routers
B. Transport Nodes
C. Logical Switches
D. Virtual firewalls
View answer
Correct Answer: BC

View The Updated Vmware Exam Questions

SPOTO Provides 100% Real Vmware Exam Questions for You to Pass Your Vmware Exam!

Get Vmware Practice Test

View Answers after Submission

Please submit your email and WhatsApp to get the answers of questions.

Note: Please make sure your email ID and Whatsapp are valid so that you can get the correct exam results.

Email:
Whatsapp/phone number:


Copyright © 2024. Designer by SPOTO Official Website. All Rights Reserved.