DON'T WANT TO MISS A THING?

Certification Exam Passing Tips

Latest exam news and discount info

Curated and up-to-date by our experts

Yes, send me the newsletter

ServiceNow CIS-Discovery Exam Questions and Answers, Certified Implementation Specialist - Discovery | SPOTO

SPOTO's latest exam dumps on the homepage, with a 100% pass rate! SPOTO delivers authentic Cisco CCNA, CCNP study materials, CCIE Lab solutions, PMP, CISA, CISM, AWS, and Palo Alto exam dumps. Our comprehensive study materials are meticulously aligned with the latest exam objectives. With a proven track record, we have enabled thousands of candidates worldwide to pass their IT certifications on their first attempt. Over the past 20+ years, SPOTO has successfully placed numerous IT professionals in Fortune 500 companies.
Take other online exams
Question #1
Which choice best represents how to modify the functionality shown in this image?
A. From a Classifier
B. From a Discovery Pattern
C. From the MID Server
D. From a Probe
View answer
Correct Answer: D
Question #2
For the Parse Variable pattern operation, what is required to have two different parsing methods to populate variables?
A. Two different Debug Mode sessions
B. A tabular and a scalar variable
C. Two different steps
D. Two different Define Parsing selections on the same step
View answer
Correct Answer: C
Question #3
Which choice allows the following functionality to occur? If this value is set to 1000 and a discovery must scan 10,000 IP addresses using a single MID Server, it creates 10 Shazzam probes with each probe scanning 1000 IP addresses.
A. MID Server Clusters
B. MID Server selection method
C. Shazzam Batch Sizecorrect
D. Behaviors
View answer
Correct Answer: C
Question #4
Which of the following choices are only used for the Application Pattern Type? (Choose two.)
A. Run Ordercorrect
B. Identification Sectioncorrect
C. CI Type
D. Operating System
View answer
Correct Answer: AB
Question #5
Which of the following choices explain differences between Service Mapping and Discovery? (Choose two.)
A. Discovery requires agent installation to find hardware devices, Service Mapping requires agents for software
B. Discovery finds applications and devices on your network, Service Mapping monitors those devices
C. Discovery utilizes IP address ranges for initial discovery, Service Mapping uses entry points
D. Discovery addresses inventory-related use-cases, while Service Mapping allows for the creation of accurate maps of application service topologies
View answer
Correct Answer: ABC
Question #6
What are the two main options within a Parse File operation?
A. Discover Now and Quick Discoverycorrect
B. Select Operating System and Method
C. Select File and Define Parsingcorrect
D. Match and Select Filecorrect
View answer
Correct Answer: ACD
Question #7
A discovery runs against a Windows Server returning the following attribute values for the first time: name = WindowsSN1 serial_number = 12321 A subsequent discovery is ran against a different Windows Server returning the following attribute values: name = WindowsSN2 serial_number = 12321 With only base system CI Identifiers configured, which of the following is true?
A. A Windows Server CI is created, then updated with WindowsSN2 as the name
B. Two Windows Sewer CIs are created, with WindowsSN1 AND WindowsSN2 for names
C. Two Windows Server CIs are created, without serial_number values
D. A Windows Server CI is created, then updated with WindowsSN1 as the name
View answer
Correct Answer: B
Question #8
Which of the choices are types of temporary variables in a discovery pattern?Choose 2 answers
A. Scalar/List
B. Command
C. SQL statement
D. Tabular/Table
View answer
Correct Answer: AD
Question #9
Discovery finds and maps dependencies for the following types of storage devices. (Choose three.)
A. Direct-attached storage (DAS)correct
B. Network-attached storage (NAS)correct
C. Storage area network (SAN)correct
D. Multiple area network (MAN)
E. Redundant Array of Independent Disks (RAID)
View answer
Correct Answer: ABC
Question #10
By default, which of the following are automatically available as variables for horizontal discovery patterns? (Choose two.)
A. infrastructure_systemcorrect
B. The CI Type on the Discovery Pattern form
C. windows_cmdb_ci
D. computer_systemcorrect
View answer
Correct Answer: AD
Question #11
A Discovery Schedule contains a /24 subnet IP Range and a Shazzam batch size of 5000. How many times will a Shazzam probe be launched during discovery?
A.
B.
C. 000
D. 54
View answer
Correct Answer: A
Question #12
Based on the following image, which of the following choices is also true about London Linux Servers?
A. It is a CMDB Group with Dashboard Group type
B. It is a CMDB Group with Health Group type
C. It is a Datacenter Group in London
D. It is a CMDB Group with Default Group type
View answer
Correct Answer: B
Question #13
Based on this image, which of the following statements are true? (Choose three.)
A. The name of the CI stays 'Windows1'
B. The name of the CI changes to 'Windows2'
C. The name of the CI does not populate with either discovery
D. The CI is not discovered because Discovery is not listed in either image
View answer
Correct Answer: ABD
Question #14
Which of the below choices are kinds of variables used in discovery patterns? (Choose three.)
A. CI attributes
B. Prefix
C. Temporary
D. Fixed
E. Global
View answer
Correct Answer: ACE
Question #15
File-based Discovery is triggered during the __________.
A. lassify Phase
B. can Phase
C. xploration Phase
D. attern Phase
E. dentification Phase
View answer
Correct Answer: C
Question #16
Which choice best describes how to use a Behavior for discovery?
A. The MID Server selection method on a Discovery Schedule
B. The Behavior drop-down menu on a Discovery IP Range
C. The Behavior drop-down menu on a Discovery Status
D. The Behavior checkbox on a C
View answer
Correct Answer: B
Question #17
Which choice allows the following functionality to occur? If this value is set to 1000 and a discovery must scan 10,000 IP addresses using a single MID Server, it creates 10 Shazzam probes with each probe scanning 1000 IP addresses.
A. MID Server Clusters
B. MID Server selection method
C. Shazzam Batch Sizecorrect
D. Behaviors
View answer
Correct Answer: C
Question #18
Which choice best describes how to use a Behavior for discovery?
A. he MID Server selection method on a Discovery Schedule
B. he Behavior drop-down menu on a Discovery IP Range
C. he Behavior drop-down menu on a Discovery Status
D. he Behavior checkbox on a CI
View answer
Correct Answer: A
Question #19
Which of the following choices must be installed on a MID Server to run Credential-less Discovery?
A. Credential-less Extension
B. Nmap
C. Advanced IP Scanner
D. Defender
View answer
Correct Answer: B
Question #20
Which of the following does the ECC Queue provide? (Choose two.)
A. Login credentials for the MID Server host
B. The actual XML payload that is sent to or from an instance
C. A connected flow of probe and sensor activity
D. The process responsible for defining, analyzing, planning, measuring, and improving all aspects of the availability of IT services
View answer
Correct Answer: ABC
Question #21
In order to use Debug from the Pattern Designer, you must have what?
A. a proxy server
B. a discoverable CI
C. the admin role
D. Service Mapping installedcorrect
View answer
Correct Answer: D
Question #22
Which method is used by Discovery to determine if a Host IP is active or alive?
A. ort Scan
B. raceroute
C. ing
D. lassification
View answer
Correct Answer: A
Question #23
Which best describes Discovery schedule of type Configuration Item?
A. Verifies Configuration Item data from the scanned IP ranges against the data in the CMD
B. Creates only a list of discovered IPs in both IPv4 and IPv6 formats
C. Collects complete information from the scanned IP ranges and sends it to the CMD
D. Directly populates records in the assets table
View answer
Correct Answer: B
Question #24
Which of the following pattern operations query targets? (Choose two.)
A. MI Query
B. erge Table
C. et Process
D. arse Variable
View answer
Correct Answer: AC
Question #25
In Discovery, what table associates an IP address and a credential?
A. Credential Affinity
B. Service Affinitycorrect
C. Service CI Association
D. Tags
View answer
Correct Answer: B
Question #26
A Discovery Schedule contains a /24 subnet IP Range and a Shazzam batch size of 5000. How many times will a Shazzam probe be launched during discovery?
A. 1
B. 2
C. 5000correct
D. 254
View answer
Correct Answer: C
Question #27
Which best describes Discovery schedule of type Configuration Item?
A. Verifies Configuration Item data from the scanned IP ranges against the data in the CMDB
B. Creates only a list of discovered IPs in both IPv4 and IPv6 formats
C. Collects complete information from the scanned IP ranges and sends it to the CMDB
D. Directly populates records in the assets table
View answer
Correct Answer: C
Question #28
From an SNMP Query pattern operation, which of the choices are valid Variable Types? (Choose two.)
A. est
B. able
C. calar
D. I Type
View answer
Correct Answer: BC
Question #29
What would you see in the Discovery pattern log that you would not see in the ECC Queue?
A. ASuccess or failure of the individual pattern steps
B. BPayload of CI attributes and relationships
C. CShazzam probe payload
D. DRelationships created
View answer
Correct Answer: A
Question #30
What does the MID Server need to collect vCenter events?
A. vCenter Event Collector extensioncorrect
B. MID SNMP Trap Listener extension
C. Firewall
D. vCenter probes
View answer
Correct Answer: A

View The Updated ServiceNow Exam Questions

SPOTO Provides 100% Real ServiceNow Exam Questions for You to Pass Your ServiceNow Exam!

Get ServiceNow Practice Test

View Answers after Submission

Please submit your email and WhatsApp to get the answers of questions.

Note: Please make sure your email ID and Whatsapp are valid so that you can get the correct exam results.

Email:
Whatsapp/phone number:


Copyright © 2024. Designer by SPOTO Official Website. All Rights Reserved.