DON'T WANT TO MISS A THING?

Certification Exam Passing Tips

Latest exam news and discount info

Curated and up-to-date by our experts

Yes, send me the newsletter

Huawei H35-580 Exam Questions and Answers, Huawei HCIA-5G-RNP&RNO | SPOTO

SPOTO's latest exam dumps on the homepage, with a 100% pass rate! SPOTO delivers authentic Cisco CCNA, CCNP study materials, CCIE Lab solutions, PMP, CISA, CISM, AWS, and Palo Alto exam dumps. Our comprehensive study materials are meticulously aligned with the latest exam objectives. With a proven track record, we have enabled thousands of candidates worldwide to pass their IT certifications on their first attempt. Over the past 20+ years, SPOTO has successfully placed numerous IT professionals in Fortune 500 companies.
Take other online exams
Question #1
For a 100MHz cell, when the downlink uses type 0 allocation, what is the minimum resource allocated in the frequency domain?
A. 16RBcorrect
B. 4RB
C. SRB
D. 2RB
View answer
Correct Answer: A
Question #2
In downlink detection, what is the PDCCH BLER synchronization threshold Qin?
A. 0
B. 0
C. 0
D. 0
View answer
Correct Answer: A
Question #3
Which of the following parameters does not need to be configured in the command to configure the 5G external cell?
A. PCI
B. gNode B ID lengthcorrect
C. TAC
D. gNode B ID
View answer
Correct Answer: B
Question #4
For a 60KHZ SCS configuration, how many time slots are included in a radio frame?
A. 40correct
B. 80
C. 160
D. 20
View answer
Correct Answer: A
Question #5
Which of the following factors is not involved in calculating the number of RBs for a user in downlink scheduling?
A. RI reporting
B. MCS
C. PMI reportingcorrect
D. Cache data volume
View answer
Correct Answer: C
Question #6
In the UE access anchor point policy, if the "cell prohibited" state is set to "prohibited", the UE cannot occupy the resources of this cell.
A. Truecorrect
B. False
View answer
Correct Answer: A
Question #7
When using Probe to test the NSA network, it is found that the MAC layer rate of LTE uplink is 20Mbps, but the PDCP layer rate is 0. Which of the following understandings is correct?
A. The bit error rate is too high and the data is retransmitted
B. LTE data converges to NR's PDCP layercorrect
C. Tool statistics anomaly
D. PDCP layer failure
View answer
Correct Answer: B
Question #8
How much data does the SSB that occupies 20 RB resources carry?
A. 432 bits
B. 576 bits
C. 972 bits
D. 864 bitscorrect
View answer
Correct Answer: D
Question #9
As long as the SSB frequency or SCS between the serving cell and the neighboring cell is different, the terminal's measurement of the neighboring cell is an inter-frequency measurement.
A. Truecorrect
B. False
View answer
Correct Answer: A
Question #10
Among the A3 event parameters for intra-frequency handover, which of the following parameters cannot be configured individually based on QCI?
A. A3 bias
B. Neighborhood Offset (CIO)correct
C. A3 Amplitude Hysteresis
D. A3 time lag
View answer
Correct Answer: B
Question #11
In each TTI scheduling, the scheduling priority of the control plane information is absolutely higher than the scheduling of the data plane.
A. Truecorrect
B. False
View answer
Correct Answer: A
Question #12
Which of the following manufacturers was the first to complete the SA functional test of the domestic IMT-2020 5G Promotion Group?
A. Huaweicorrect
B. Ericsson
C. ZTE
D. Nokia
View answer
Correct Answer: A
Question #13
The initial TA (time advance) adjustment of the terminal is obtained through which of the following messages?
A. SIB1
B. Random access responsecorrect
C. RRC connection setup
D. RRC Reconfiguration
View answer
Correct Answer: B
Question #14
In an inter-frequency handover scenario based on frequency priority, which of the following event measurement reports is used to trigger inter-frequency measurements?
A. A2
B. A4
C. A3
D. A1correct
View answer
Correct Answer: D
Question #15
During downlink scheduling, which of the following services has the highest scheduling priority?
A. RRC signaling
B. SIB
C. MIBcorrect
D. VoNR service
View answer
Correct Answer: C
Question #16
For the N78 frequency band, which of the following time slot ratios (downlink, uplink) can support the transmission of SSB beams?
A. 4:01:00
B. 3:01:00
C. 7:03:00correct
D. 8:02:00
View answer
Correct Answer: C
Question #17
In the process of connecting A from in-vehicle information services to intelligent transportation, the intelligentization of the network and the intelligentization of the infrastructure need to work together.
A. Truecorrect
B. False
View answer
Correct Answer: A
Question #18
During the handover preparation process, the source cell determines the target cell for handover based on which of the following parameters?
A. PCIcorrect
B. NCGI
C. TAC
D. Frequency
View answer
Correct Answer: A
Question #19
Which of the following in the terminal capability report indicates that the terminal supports antennas?
A. SupportedsRs-Resourse
B. maxNumberSRS
C. SupportedSRS-AntennaSwitchingcorrect
D. SupportedSRS-TxPortSwith
View answer
Correct Answer: C
Question #20
During uplink scheduling, what is the fixed value of the “logical channel guaranteed rate” for each non-GBR logical channel?
A. 16kbps
B. 32kbps
C. 8kbpscorrect
D. 4kbps
View answer
Correct Answer: C
Question #21
In the window size, the larger the window, the stronger the resistance to delay
A. Truecorrect
B. False
View answer
Correct Answer: A
Question #22
For SA networking, voice solutions include VONR and CSFB
A. True
B. Falsecorrect
View answer
Correct Answer: B
Question #23
In the drive test tool, which of the following indicators cannot be monitored?
A. SSBRSRP
B. PDSCHIBLERcorrect
C. CQI
D. SRSSINR
View answer
Correct Answer: B
Question #24
During the same-frequency cell reselection process, if you want to make it easier for the terminal to reselect from the serving cell to a specific neighboring cell, how can you modify the parameters?
A. Increase Qoffset
B. Increase Qhyst
C. Reduce Qoffsetcorrect
D. Reduce Qhyst
View answer
Correct Answer: C
Question #25
During the downlink MCS adjustment process, the base station makes the adjustment based on which of the following measurements?
A. PDSC H SINR
B. PDCC H SINR
C. PDSC H BLERcorrect
D. PDCCHBLER?
View answer
Correct Answer: C
Question #26
In the existing network, we recommend that all cells use the configuration parameters under the peak rate scenario to improve user experience.
A. True
B. Falsecorrect
View answer
Correct Answer: B
Question #27
The redirection process has lower service interruption delay than the switching process.
A. True
B. Falsecorrect
View answer
Correct Answer: B
Question #28
Imbalanced terminal receiving antennas will affect RANK performance. Generally, within what range can the average RSRP difference of different antennas be considered balanced?
A. 6dBcorrect
B. 8dB
C. 4dB
D. 2dB
View answer
Correct Answer: A
Question #29
The terminal can send a power control command to the base station to control the transmit power of the PDSCH.
A. True
B. Falsecorrect
View answer
Correct Answer: B
Question #30
In the continuous CA scenario in the protocol frequency band, what is the maximum center frequency band interval between carrier 1 (60MHz bandwidth) and carrier 2 (100MHz bandwidth) in the n41 frequency band?
A. 89
B. 99
C. 69
D. 79
View answer
Correct Answer: D

View Answers after Submission

Please submit your email and WhatsApp to get the answers of questions.

Note: Please make sure your email ID and Whatsapp are valid so that you can get the correct exam results.

Email:
Whatsapp/phone number:


Copyright © 2024. Designer by SPOTO Official Website. All Rights Reserved.