DON'T WANT TO MISS A THING?

Certification Exam Passing Tips

Latest exam news and discount info

Curated and up-to-date by our experts

Yes, send me the newsletter

Huawei H35-211 Exam Questions and Answers, Huawei HCIP-Access Certified | SPOTO

SPOTO's latest exam dumps on the homepage, with a 100% pass rate! SPOTO delivers authentic Cisco CCNA, CCNP study materials, CCIE Lab solutions, PMP, CISA, CISM, AWS, and Palo Alto exam dumps. Our comprehensive study materials are meticulously aligned with the latest exam objectives. With a proven track record, we have enabled thousands of candidates worldwide to pass their IT certifications on their first attempt. Over the past 20+ years, SPOTO has successfully placed numerous IT professionals in Fortune 500 companies.
Take other online exams
Question #1
When the ONU is replaced in the eSight system, which of the following options can be used to reselect the ONU?
A. ONU SNcorrect
B. ONU ID
C. ONU MAC
D. ONU IP
View answer
Correct Answer: A
Question #2
Which of the following options is correct about congestion management?
A. When using the DWRR method, the weight ratio of each queue can be adjusted, but the total size is a fixed value
B. When using the PQ mode, if the packet carrying priority is higher, the time it is sent from the port will be earlier
C. If the low-priority queue uses PQ and the high-priority queue uses DWRR, the packets in the low-priority queue will be sent first
D. When using DWRR, the larger the packet size, the larger the actual egress bandwidth obtained
View answer
Correct Answer: B
Question #3
Is the following description correct? The MSAN is connected to the lanswitch GE or FE, the working mode of the two ports, one can be self-negotiation mode and the other is mandatory mode.
A. True
B. Falsecorrect
View answer
Correct Answer: B
Question #4
When locating ADSL/ADSL2+ faults, which of the following may cause users to make calls but not access the Internet?
A. The configuration of the interlace depth of the line configuration template is unreasonable
B. ADSL Modem failurecorrect
C. User outside line interruption
D. None of the above
View answer
Correct Answer: B
Question #5
The data multiplexing mode of 10G GPON is similar to GPON, and TDMA technology is still used in the upstream.
A. False
B. True
View answer
Correct Answer: B
Question #6
There are three cells A, B, and C. If A does not have a handover relationship with B, but has a handover relationship with C, the coverage of these three cells does not cross the area, and a user moves in the direction of A-B-C, then which of the following statement is correct?
A. In the idle mode of the mobile phone, first reselect to B, then reselect to C
B. In call mode, there will be no call drop
C. No matter in idle mode or call mode, network drop will occurcorrect
D. If the mobile phone is turned off in cell A and turned on in cell C, the cell phone will first search for the LA where cell C is located
View answer
Correct Answer: C
Question #7
Is the following description correct? ADSL PPPoE/PPPoA users of the MA5600 implement authentication and access the Internet on the upper BRAS. After the opening, there is often a service interruption, but once the interruption is over, it is possible to redial the Internet again. This problem may be caused by incorrect configuration of the interleaving delay of the port parameters.
A. Truecorrect
B. False
View answer
Correct Answer: A
Question #8
Is the following description correct? Traffic suppression on the uplink port of MA5680T suppresses multicast only for unknown multicast traffic.
A. Truecorrect
B. False
View answer
Correct Answer: A
Question #9
(Radio) The downstream effective bandwidth of the GPON PON port is
A. 2G
B. 1
C. 2
D. 2
View answer
Correct Answer: C
Question #10
The complete SIP message interaction process will include multiple request and response messages. A field can be used in the header field of the SIP message to describe the specific request corresponding to the current response message. This field is:
A. Cseacorrect
B. CaLL-ID
C. First line
D. Message body
View answer
Correct Answer: A
Question #11
Is the following description correct? The essence of the GPON system carrying TDM signals is to encapsulate the TDM into GEM frames on the ONU, decapsulate the GEM frames into TDM signals on the OLT, and then transmit them to devices capable of TDM signals on the uplink.
A. Truecorrect
B. False
View answer
Correct Answer: A
Question #12
During the evolution of EPON to 10G EPON, WDM wavelength division modules are added at the central office to achieve a smooth transition, and ODN coexists.
A. Ture
B. Falsecorrect
View answer
Correct Answer: B
Question #13
What are the prerequisites for the mobile phone to be able to select a cell normally and successfully reside in the cell? (Multiple choice)
A. The cell is not prohibited from accessing
B. The value of cell selection parameter C1 is greater than 0
C. Does not belong to the location area in the "Domestic Roaming Prohibited Location Area" listcorrect
D. The mobile phone is not in arrears
View answer
Correct Answer: ABC
Question #14
What is the downlink wavelength in the 10GGPON system?
A. 1310nm
B. 1577nmcorrect
C. 1270mm
D. 1490nm
View answer
Correct Answer: B
Question #15
The (radio) prerequisites for esight to automatically discover OLT and MXU devices by IP address are not included
A. Esight and the device need to be on the same network segment, otherwise the device cannot be discovered using the ARP broadcast protocol
B. You already have the operation permission of "Resource Access"
C. Esight and the device can be routed to communicate (ping each other)
D. The SMMP parameters on the esight side have been configured and are aligned with the device side SP parameters
View answer
Correct Answer: A
Question #16
The noise introduced by the repeater system is related to the noise figure of the equipment, and has nothing to do with the gain.
A. True
B. Falsecorrect
View answer
Correct Answer: B
Question #17
A GPON Type C dual-homing protection is deployed for a power access service, and the status of the protection group and the uplink Ethernet port is set on the OLT. When the status of the Ethernet port associated with the protection group on the OLT becomes down, which of the following description is incorrect?
A. The status of the work port on the ONU side becomes standby
B. OLT general ONU uplink status changes
C. After the switch, the service on the ONU is sent to the OLT through the protect port, that is, the service message is transmitted on the protect link
D. ONU detects link failure and triggers protection switchingcorrect
View answer
Correct Answer: D
Question #18
In the frequency planning of a certain place, in addition to the main BCCH frequency point, a 6M frequency band is allocated for TCH, and 1x3 frequency hopping is adopted. In order to ensure that the same adjacent frequency collision does not occur in the same base station, what is the maximum station configuration?
A. S444
B. S555
C. S666correct
D. S777
View answer
Correct Answer: C
Question #19
Which of the following belong to the GPRS/EDGE wireless transmission model? (Multiple choice)
A. Proportion of different businessescorrect
B. Distribution of coding methodscorrect
C. Packet Interval Distribution
D. Signaling overheadcorrect
View answer
Correct Answer: ABD
Question #20
The number of users under the OLT can also decide whether the VLAN is a single-layer or double-layer VLAN. When the number of users is small, a single-layer VLAN can be used. When the required VLAN to distinguish the number of services and users is greater than ( ), a double-layer LAN must be used.
A. 4Kcorrect
B. 8K
C. 2K
D. 1K
View answer
Correct Answer: A
Question #21
Under the H.248 protocol, if the signaling IP and media IP are both 10.1.1.100/8, and the voice gateway is 10.1.1.1, when configuring the voIP service, which of the following command is wrong?
A. Use the command ip address media 10
B. Use the reset cold start command under the voice interface to make the interface attribute configuration effective
C. Use the if-h248 attributei command to configure interface attributes under the voice interface
D. Use the command ip address signaling 10
View answer
Correct Answer: D
Question #22
Is the following description correct? MA5600T/MA5680T supports Ethernet, E1, and POTS services on the PON side and does not support ATM services.
A. Truecorrect
B. False
View answer
Correct Answer: A
Question #23
In Huawei's u2000 management system, when adding network elements, you can only add -- ones- when you access the network element.
A. wrong
B. Right
View answer
Correct Answer: A
Question #24
The ascending wavelength of the (radio) 10G EPONE is
A. 1577nm
B. 1270m (symmetrical)
C. 1310m (asymmetrical)
D. 1490nm
View answer
Correct Answer: BC
Question #25
When deploying GPON Type C single-homing protection, which of the following descriptions is correct?
A. A branch fiber breaks, and the status of the OLT's work port changes to standbyY
B. The two ports protected by the OLT side cannot send and receive data at the same timecorrect
C. When the olt uplink fails, protection switching can be triggered
D. The service configuration of ONU access is exactly the same as the configuration before protection
View answer
Correct Answer: B
Question #26
When the PIT P switch is enabled globally or in the VLAN service template of the OLT, the service virtual port is allowed to carry upstream packets, the Vendor tag is switched, and the user upstream packets carry Vendor tarf information, which of the following about the OLT processing strategy of PITP message is correct?
A. The OLT adds a local Vendor tap to the upstream PITP message
B. The OLT directly forwards the user-side PITP message without any processing
C. The OLT leaves the Vendor tag carried in the uplink PITP message, plus the local Vendor tagcorrect
D. OLT discards uplink PITP packets
View answer
Correct Answer: C
Question #27
When configuring the multicast service on the MA5600T/MA5680T, the multicast vlan program adopts the static configuration method. Which of the following options must be configured, otherwise the multicast program may not be watched?
A. igmp profile
B. igmp programcorrect
C. igmp priority
D. igmp preview
View answer
Correct Answer: B
Question #28
Both XGS-PON and GPON have asymmetric upstream and downstream rates.
A. TRUEcorrect
B. FALSE
View answer
Correct Answer: A
Question #29
In the following various types of network topology, which is the most secure topology structure?
A. Star structure
B. Chain structure
C. Ring structure
D. Full mesh structure
View answer
Correct Answer: D
Question #30
BCCH is a broadcast control channel. Each cell must be configured with one BCCH. Which time slots of the first carrier frequency can be configured?
A. TS0correct
B. TS2
C. TS4
D. TS6
View answer
Correct Answer: A

View Answers after Submission

Please submit your email and WhatsApp to get the answers of questions.

Note: Please make sure your email ID and Whatsapp are valid so that you can get the correct exam results.

Email:
Whatsapp/phone number:


Copyright © 2024. Designer by SPOTO Official Website. All Rights Reserved.