Ways to Pass Cisco 300-425 ENWLSD Certification Exam with a Single Shot

Do you want to be able to pass the Cisco 300-425 ENWLSD test with flying colors? Fortunately, there are a variety of preparatory tools and resources available on the SPOTO website for your convenience. All of them are excellent instruments for ensuring your success in the official exam as well as in the performance of your regular professional responsibilities.

When you purchase SPOTO 300-425 test dumps, you are purchasing a collection of questions and answers from prior examinations. Essentially, they are designed to imitate the real test in a way that will better prepare you for the real thing. Without a doubt, by working through the questions and discussing the answers in detail, you will gain a more practical grasp of how to navigate your way through the actual exam.

Here are ten practice questions to help you gauge your level of preparation. Now is the time to try it!

Join our study group to get more exam study materials and tips!

Categories	Exam Code	100% Pass Dumps
CCNP Enterprise	350-401 ENCOR
	300-410 ENARSI
	300-415 ENSDWI
	300-420 ENSLD
	300-425 ENWLSD
	300-430 ENWLSI
	300-435 ENAUTO

QUESTION 1

Which three pieces of equipment are needed to conduct a fully measured wireless survey? (Choose three.)
A.PoE battery
B.spirit level
C.access point
D.tall tripod
E.goggles
F.ladder

Answer: A, C, D

QUESTION 2

An engineer is designing a wireless network that will support many different types of wireless clients. When conducting the survey, which client must be used to ensure a consistent experience for all of the wireless clients?

A.the client that has the highest RF properties
B.the client that is used most by the company
C.the client that is used least by the company
D.the client with the worst RF characteristics
Correct Answer: B

QUESTION 3

An enterprise has moved most services to the cloud, including email applications and real-time communication. Which feature must be enabled on the wireless network to improve the user experience?

A. QoS
B. Radio management
C.Interference mitigation
D.Fast secure roaming

Correct Answer: D

QUESTION 4

Which two considerations must a network engineer have when planning for voice over wireless roaming? (Choose two.)

A.Full reauthentication introduces gaps in a voice conversation.
B.Roaming time increases when using 802.1x + Cisco Centralized Key Management.
C.Roaming occurs when the phone has seen at least four APs.
D.Roaming occurs when the phone has reached -80 dBs or below.
E.Roaming with only 802.1x authentication requires full reauthentication.

Correct Answer: AE

QUESTION 5
A network engineer is configuring high availability on an access point. What is the maximum number of controllers that can be configured?

A.1
B.2
C.3
D.4

Correct Answer: B

Download Free Cisco Practice tests to pass your Cisco exam fast!

QUESTION 6

A customer called with a requirement that internal clients must be on different subnets depending on the building they are in. All access points are operating in local mode and will not be modified, and this is a single controller solution. Which design approach creates the desired result?

A. Create AP groups for each desired location, map the correct VLANs to the internal SSID, and add the access points for that location.
B. Create an SSID place it to the desired VLAN under WLANs and configure 802.1x in ISE to assign the correct VLAN based on the SSID from which the client is authenticating
C. Create FlexConnect groups, place the access points in, and set the correct VLAN to SSID mapping based on location.
D. Create mobility anchors for the SSID and on the controller under the internal SSID create a foreign map to the desired VLAN based on location.

Correct Answer: A

QUESTION 7

An engineer has performed a predictive site survey for high-speed data and voice in an indoor office. What is the recommended data rate with -67 dBm signal level for optimal VoWLAN design?

A.6 Mbps on 802.11 bgn
B.24 Mbps on 802.11 bgn
C.12 Mbps on 802.11 an
D.24 Mbps on 802.11 an

Correct Answer: B

QUESTION 8

A customer is looking for a network design with Cisco Hyperloctation using AP4800 for location tracking via a custom mobile app Issues appeared in the past with refresh rates for location updates. What needs to be implemented to meet these requirements?
A. Cisco CMX SDK in the location app
B. redundant CMX and fetch location in round-robin fashion.
C. device Bluetooth via the app
D. Cisco FastLocate technology

Correct Answer: D

QUESTION 9

A network administrator of a global organization is collapsing all controllers to a single cluster located in central Europe. Which concern must addressed?

A. Some channels may not be available consistently across the organization.
B. Different RF policies per office are not available in this configuration.
C. Syslog must be configured to the time-zone of the NMS platform.
D. Centralized controllers cannot uniformly authenticate global users.

Correct Answer: C

QUESTION 10

An engineer is reducing the subnet size of the corporate WLAN by segmenting the VLAN into smaller subnets. Clients will be assigned a subnet by location. Which type of groups can the engineer use to map the smaller subnets to the corporate WLAN?

A. WLC port groups
B. RF groups
C. AP groups
D. interface groups

Correct Answer: D

Conclusion

As you would agree, improving one’s chances of passing any Cisco exam necessitates a significant investment of time and resources. And it is on this basis that you must use valid and appropriate study tools in your quest to pass the 300-425 ENWLSD exam, such as SPOTO 300-425 exam dumps, in order to be successful.

Having developed a thorough understanding of the subject matter, you are more likely to pass the exam with flying colors and move closer to earning the CCNP Enterprise certification.