Are you preparing for the 350-401 exam? These questions for the CCNP and CCIE ENCOR 350-401 help you review enterprise networking essentials you need to know and test your expertise on basic enterprise networking concepts.
Try 10 CCNP 350-401 ENCOR practice tests now to assess your prep level!
1. Which function does a fabric edge node perform in an SD-Access deployment?
A. Connects endpoints to the fabric and forwards their traffic.
B. Encapsulates end-user data traffic into LISP.
C. Connects the SD-Access fabric to another fabric or external Layer 3 networks.
D. Provides reachability between border nodes in the fabric underlay.
Correct Answer: A
2. Refer to the exhibit. Which privilege level is assigned to VTY users?
A. 1
B. 7
C. 13
D. 15
Correct Answer: A
3. What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content.
B. The RIB maintains a minor image of the FIB.
C. The RIB is used to make IP source prefix-based switching decisions.
D. The FIB is where all IP routing information is stored.
Correct Answer: A
4. What is a requirement for an Ansible-managed node is true?
A. It must have an SSH server running.
B. It must be a Linux server or a Cisco device.
C. It must support ad hoc commands.
D. It must have an Ansible Tower installed.
Correct Answer: A
5. A client device fails to see the enterprise SSID, but other client devices are connected. What is the cause of this issue?
A. The client has incorrect credentials stored for the configured broadcast SSID.
B. The hidden SSID was not manually configured on the client.
C. The broadcast SSID was not manually configured on the client.
D. The client has incorrect credentials stored for the configured hidden SSID.
Correct Answer: B
6. Which two descriptions of FlexConnect mode for Cisco APs are true? (Choose two.)
A. APs that operate in FlexConnect mode cannot detect rogue APs
B. FlexConnect mode is used when the APs are set up in a mesh environment and used to bridge between each other.
C. FlexConnect mode is a feature that is designed to allow specified CAPWAP-enabled APs to exclude themselves from managing data traffic between clients and infrastructure.
D. When connected to the controller, FlexConnect APs can tunnel traffic back to the controller
E. FlexConnect mode is a wireless solution for branch office and remote office deployments
Correct Answer: DE
7. Which OSPF network types are compatible and allow communication through the two peering devices?
A. point-to-multipoint to nonbroadcast
B. broadcast to nonbroadcast
C. point-to-multipoint to broadcast
D. broadcast to point-to-point
Correct Answer: B
8. Which NGFW mode blocks flows crossing the firewall?
A. tap
B. inline
C. passive
D. inline tap
Correct Answer: B
9. Which statement about route targets is true when using VRF-Lite?
A. Route targets control the import and export of routes into a customer routing table.
B. When BGP is configured, route targets are transmitted as BGP standard communities.
C. Route targets allow customers to be assigned overlapping addresses.
D. Route targets uniquely identify the customer routing table.
Correct Answer: A
10. How does Cisco TrustSec enable more flexible access controls for dynamic networking environments and data centers?
A. uses flexible NetFlow
B. assigns a VLAN to the endpoint
C. classifies traffic based on advanced application recognition
D. classifies traffic based on the contextual identity of the endpoint rather than its IP address
Correct Answer: D
Conclusion
If you consider taking the CCNP 350-401 exam, SPOTO will provide a dump of the CCNP 350-401 exam covering actual CCNP 350-401 exam questions and answers to help you pass the CCNP 350-401 exam quickly! Find more CCNP enterprise concentration exam demo here: Try Free CCNP 300-435 ENAUTO Exam Demo Questions
Comments