A network administrator configured NTP on a Cisco router to get synchronized time for system and logs from a unified time source. The configuration did not work as desired. Which service must be enabled to resolve the issue?

Troubleshoot and ensure that branch В only ever uses the MPLS В network to reach HQ. Which action achieves this requirement?

The OSPF routing protocol is redistributed into the BGP routing protocol, but not all the OSPF routes are distributed into BGP. Which action resolves the issue?

A network administrator logs into the router using TACACS+ username and password credentials, but the administrator cannot run any privileged commands. Which action resolves the issue?

Routing protocols are mutually redistributed on R3 and R1. Users report intermittent connectivity to services hosted on the 10.1.1.0/24 prefix. Significant routing update changes are noticed on R3 when the show ip route profile command is run. How must the services be stabilized?

The Math and Science departments connect through the corporate IT router, but users in the Math department must not be able to reach the Science department and vice versa. Which configuration accomplishes this task? A.vrf definition Science address-family ipv4 ! interface E 0/2 ip address 192.168.1.1 255.255.255.0 no shut ! interface E 0/3 ip address 192.168.2.1 255.255.255.0 no shut B.vrf definition Science address-family ipv4 ! interface E 0/2 vrf forwarding Science ip address 192.168.1.1 255.255.255.0 no

An engineer configured R2 and R5 as route reflectors and noticed that not all routes are sent to R1 to advertise to the eBGP peers. Which iBGP routers must be configured as route reflectors to advertise all routes to restore reachability across all networks?

Refer to the exhibits. An engineer filtered messages based on severity to minimize log messages. After applying the filter, the engineer noticed that it filtered required messages as well. Which action must the engineer take to resolve the issue?

Refer to the exhibits. An engineer identified a Layer 2 loop using DNAC. Which command fixes the problem in the SF-D9300-1 switch? A.spanning-tree portfast bpduguard B.no spanning-tree uplinkfast C.spanning-tree backbonefast D.spanning-tree loopguard default

Which action resolves the failed authentication attempt to the router?

The remote server is failing to receive the NetFlow data. Which action resolves the issue?

Which two protocols work in the control plane of P routers across the MPLS cloud? (Choose two.) A.ECMP

Refer to the exhibits. SanFrancisco and Boston routers are choosing slower links to reach each other despite the direct links being up. Which configuration fixes the issue? A.All Routers router ospf 1 auto-cost reference-bandwidth 100

NTP is configured across the network infrastructure and Cisco DNA Center. An NTP issue was reported on the Cisco DNA Center at 17:15. Which action resolves the issue?

A network administrator enables DHCP snooping on the Cisco Catalyst 3750-X switch and configures the uplink port (Port-channel2) as a trusted port. Clients are not receiving an IP address, but when DHCP snooping is disabled, clients start receiving IP addresses. Which global command resolves the issue?

How does an MPLS Layer 3 VPN function?

PC-2 failed to establish a Telnet connection to the terminal server. Which configuration resolves the issue?

The Los Angeles and New York routers are receiving routers from Chicago but not from each other. Which configuration fixes the issue? A.interface Tunnel1 no ip split-horizon eigrp 111 B.interface Tunnel1 ip next-hop-self eigrp 111 C.interface Tunnel1 tunnel mode ipsec ipv4 D.interface Tunnel1 tunnel protection ipsec profile IPSec-PROFILE

An engineer is troubleshooting on the console session of a router and turns on multiple debug commands. The console screen is filled with scrolling debug messages that none of the commands can be verified if entered correctly or display any output. Which action allows the engineer to see entered console commands while still continuing the analysis of the debug messages?

Refer to the exhibits. Which configuration allows spoke-to-spoke communication using loopback as a tunnel source?

When determining if a system is capable of support, what is the minimum time spacing required for a BFD control packet to receive once a control packet is arrived?

Which configuration feature should be used to block rogue router advertisements instead of using the IPv6 Router Advertisement Guard feature?

The DHCP client is unable to receive an IP address from the DHCP server. RouterB is configured as follows: Which command is required on the fastethernet 0/0 interface of RouterB to resolve this issue?

An engineer configured Reverse Path Forwarding on an interface and noticed that the routes are dropped when a route lookup fails on that interface for a prefix that is available in the routing table. Which interface configuration resolves the issue?

A network administrator added one router in the Cisco DNA Center and checked its discovery and health from the Network Health Dashboard. The network administrator observed that the router is still showing up as unmonitored. What must be configured on the router to mount it in the Cisco DNA Center?

When monitoring an IPv6 access list, an engineer notices that the ACL does not have any hits and is causing unnecessary traffic through the interface Which command must be configured to resolve the issue? A.ip access-group INTERNET in B.ipv6 traffic-filter INTERNET in C.ipv6 access-class INTERNET in D.access-class INTERNET in

A customer reports to the support desk that they cannot print from their PC to the local printer id:123456789. Which tool must be used to diagnose the issue using Cisco DNA Center Assurance? A.device trace B.ACL trace C.path trace D.application trace

The neighbor relationship is not coming up. Which two configurations bring the adjacency up? (Choose two.)

The network administrator configured redistribution on an ASBR to reach to all WAN networks but failed. Which action resolves the issue?