لا تريد أن تفوت شيئا؟

نصائح اجتياز امتحان الشهادة

آخر أخبار الامتحانات ومعلومات الخصم

برعاية وحديثة من قبل خبرائنا

نعم، أرسل لي النشرة الإخبارية

خذ اختبارات أخرى عبر الإنترنت
السؤال #1
An engineer must ensure that all traffic leaving AS 200 will choose Link 2 as the exit point. Assuming that all BGP neighbor relationships have been formed and that the attributes have not been changed on any of the routers, which configuration accomplishes this task?
A. R4(config-router)bgp default local-preference 200
B. R3(config-router)bgp default local-preference 200
C. R4(config-router)neighbor 10
D. R3(config-router)neighbor 10
عرض الإجابة
اجابة صحيحة: D
السؤال #2
Which access point mode allows a supported AP to function like a WLAN client would, associating and identifying client connectivity issues?
A. client mode
B. SE-connect mode
C. sensor mode
D. sniffer mode
عرض الإجابة
اجابة صحيحة: D
السؤال #3
An engineer is configuring local web authentication on a WLAN. The engineer chooses the Authentication radio button under the Layer 3 Security options for Web Policy. Which device presents the web authentication for the WLAN?
A. ISE server
B. RADIUS server
C. anchor WLC
D. local WLC
عرض الإجابة
اجابة صحيحة: AD
السؤال #4
An engineer must deny Telnet traffic from the loopback interface of router R3 to the loopback interface of router R2 during the weekend hours. All other traffic between the loopback interfaces of routers R3 and R2 must be allowed at all times. Which command set accomplishes this task?
A. R3(config)#time-range WEEKEND R3(config-time-range)#periodic Saturday Sunday 00:00 to 23:59 R3(config)#access-list 150 deny tcp host 10
B. R1(config)#time-range WEEKEND R1(config-time-range)#periodic weekend 00:00 to 23:59 R1(config)#access-list 150 deny tcp host 10
C. R3(config)#time-range WEEKEND R3(config-time-range)#periodic weekend 00:00 to 23:59 R3(config)#access-list 150 permit tcp host 10
D. R1(config)#time-range WEEKEND R1(config-time-range)#periodic Friday Sunday 00:00 to 00:00 R1(config)#access-list 150 deny tcp host 10
عرض الإجابة
اجابة صحيحة: D
السؤال #5
Which LISP device is responsible for publishing EID-to-RLOC mappings for a site?
A. ETR
B. MR
C. ITR
D. MS
عرض الإجابة
اجابة صحيحة: B
السؤال #6
A network engineer is configuring OSPF between router R1 and router R2. The engineer must ensure that a DR/BDR election does not occur on the Gigabit Ethernet interfaces in area 0. Which configuration set accomplishes this goal?
A. R1(config-if)interface Gi0/0 R1(config-if)ip ospf network point-to-point R2(config-if)interface Gi0/0 R2(config-if)ip ospf network point-to-point
B. R1(config-if)interface Gi0/0 R1(config-if)ip ospf network broadcast R2(config-if)interface Gi0/0 R2(config-if)ip ospf network broadcast
C. R1(config-if)interface Gi0/0 R1(config-if)ip ospf database-filter all out R2(config-if)interface Gi0/0 R2(config-if)ip ospf database-filter all out
D. R1(config-if)interface Gi0/0 R1(config-if)ip ospf priority 1 R2(config-if)interface Gi0/0 R2(config-if)ip ospf priority 1
عرض الإجابة
اجابة صحيحة: D
السؤال #7
Company policy restricts VLAN 10 to be allowed only on SW1 and SW2. All other VLANs can be on all three switches. An administrator has noticed that VLAN 10 has propagated to SW3. Which configuration corrects the issue?
A. SW1(config)#int gi1/1 SW1(config)#switchport trunk allowed vlan 1-9,11-4094
B. SW2(config)#int gi1/2 SW2(config)#switchport trunk allowed vlan 10
C. SW2(config)#int gi1/2 SW2(config)#switchport trunk allowed vlan 1-9,11-4094
D. SW1(config)#int gi1/1 SW1(config)#switchport trunk allowed vlan 10
عرض الإجابة
اجابة صحيحة: CE
السؤال #8
Which tool is used in Cisco DNA Center to build generic configurations that are able to be applied on devices with similar network settings?
A. Command Runner
B. Application Policies
C. Template Editor
D. Authentication Template
عرض الإجابة
اجابة صحيحة: A
السؤال #9
A port channel is configured between SW2 and SW3. SW2 is not running a Cisco operating system. When all physical connections are made, the port channel does not establish. Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel mode should be set to auto
B. The port channel on SW2 is using an incompatible protocol
C. The port-channel trunk is not allowing the native VLAN
D. The port-channel interface load balance should be set to src-mac
عرض الإجابة
اجابة صحيحة: A
السؤال #10
What is the result when a technician adds the monitor session 1 destination remote vlan 223 command?
A. The RSPAN VLAN is replaced by VLAN 223
B. RSPAN traffic is sent to VLANs 222 and 223
C. An error is flagged for configuring two destinations
D. RSPAN traffic is split between VLANs 222 and 223
عرض الإجابة
اجابة صحيحة: C
السؤال #11
Which First Hop Redundancy Protocol maximizes uplink utilization and minimizes the amount of configuration that is necessary?
A. GLBP
B. HSRP v2C
D. HSRP v1
عرض الإجابة
اجابة صحيحة: BE
السؤال #12
SwitchC connects HR and Sales to the Core switch. However, business needs require that no traffic from the Finance VLAN traverse this switch. Which command meets this requirement?
A. SwitchC(config)#vtp pruning vlan 110
B. SwitchC(config)#vtp pruning
C. SwitchC(config)#interface port-channel 1 SwitchC(config-if)#switchport trunk allowed vlan add 210,310
D. SwitchC(config)#interface port-channel 1 SwitchC(config-if)#switchport trunk allowed vlan remove 110
عرض الإجابة
اجابة صحيحة: D
السؤال #13
Which First Hop Redundancy Protocol should be used to meet a design requirement for more efficient default gateway bandwidth usage across multiple devices?
A. GLBP
B. LACP
C. HSRP
D. VRRP
عرض الإجابة
اجابة صحيحة: A
السؤال #14
What are two reasons why broadcast radiation is caused in the virtual machine environment? (Choose two.)
A. vSwitch must interrupt the server CPU to process the broadcast packet
B. The Layer 2 domain can be large in virtual machine environments
C. Virtual machines communicate primarily through broadcast mode
D. Communication between vSwitch and network switch is broadcast based
E. Communication between vSwitch and network switch is multicast based
عرض الإجابة
اجابة صحيحة: C
السؤال #15
A customer has several small branches and wants to deploy a Wi-Fi solution with local management using CAPWAP. Which deployment model meets this requirement?
A. local mode
B. autonomous
C. SD-Access wireless
D. Mobility Express
عرض الإجابة
اجابة صحيحة: B
السؤال #16
What do Cisco DNA southbound APIs provide?
A. interface between the controller and the consumer
B. RESTful API interface for orchestrator communication
C. interface between the controller and the network devicesD
عرض الإجابة
اجابة صحيحة: AE
السؤال #17
An engineer reconfigures the port-channel between SW1 and SW2 from an access port to a trunk and immediately notices this error in SW1's log: *Mar 1 09:47:22.245: %PM-4-ERR_DISABLE: bpduguard error detected on Gi0/0, putting Gi0/0 in err-disable state Which command set resolves this error?
A. SW1(config-if)#interface Gi0/0 SW1(config-if)#no spanning-tree bpdufilter SW1(config-if)#shut SW1(config-if)#no shut
B. SW1(config-if)#interface Gi0/0 SW1(config-if)#no spanning-tree bpduguard enable SW1(config-if)#shut SW1(config-if)#no shut
C. SW1(config-if)#interface Gi0/0 SW1(config-if)#spanning-tree bpduguard enable SW1(config-if)#shut SW1(config-if)#no shut
D. SW1(config-if)#interface Gi0/1 SW1(config-if)#spanning-tree bpduguard enable SW1(config-if)#shut SW1(config-if)#no shut
عرض الإجابة
اجابة صحيحة: A
السؤال #18
Assuming the WLC's interfaces are not in the same subnet as the RADIUS server, which interface would the WLC use as the source for all RADIUS-related traffic?
A. the controller management interface
B. the controller virtual interface
C. the interface specified on the WLAN configuration
D. any interface configured on the WLC
عرض الإجابة
اجابة صحيحة: C
السؤال #19
Which configuration establishes EBGP neighborship between these two directly connected neighbors and exchanges the loopback network of the two routers through BGP?
A. R1(config)#router bgp 1 R1(config-router)#neighbor 192
B. R1(config)#router bgp 1 R1(config-router)#neighbor 10
C. R1(config)#router bgp 1 R1(config-router)#neighbor 192
D. R1(config)#router bgp 1 R1(config-router)#neighbor 10
عرض الإجابة
اجابة صحيحة: AB
السؤال #20
Which NTP Stratum level is a server that is connected directly to an authoritative time source?
A. Stratum 0
B. Stratum 1
C. Stratum 14
D. Stratum 15
عرض الإجابة
اجابة صحيحة: A
السؤال #21
A client device roams between access points located on different floors in an atrium. The access points are joined to the same controller and configured in local mode. The access points are in different AP groups and have different IP addresses, but the client VLAN in the groups is the same. Which type of roam occurs?
A. inter-controller
B. inter-subnet
C. intra-VLAN
D. intra-controller
عرض الإجابة
اجابة صحيحة: CD

عرض الإجابات بعد التقديم

يرجى إرسال البريد الإلكتروني الخاص بك والواتس اب للحصول على إجابات الأسئلة.

ملحوظة: يرجى التأكد من صلاحية معرف البريد الإلكتروني وWhatsApp حتى تتمكن من الحصول على نتائج الاختبار الصحيحة.

بريد إلكتروني:
رقم الواتس اب/الهاتف:


Copyright © 2024. Designer by SPOTO Official Website. All Rights Reserved.