您將 FEX 連接到 Cisco Nexus 交換機。配置完成後,您在交換機上發出 show fex 100 命令並收到以下部分輸出:Switch#show fex 100 <輸出省略> Pinning-mode: static Max-links:1 用於控制流量的 Fabric 端口:Po100 Fabric interface state:Po100 - Interface Up.狀態:Active Eth1/1 - Interface Up.狀態:Active Eth1/2 - Interface Up.狀態:活動Active Eth2/1 - Interface Up.狀態:活動Active Eth2/2 - Interface Up.狀態:活動以下哪項是
A. 在 Po100 接口上發出 fex associate Eth2/1 命令。
B. 在 Po100 接口上發出 fex associate Eth2/2 命令。
C. 在 Po100 接口上發出 fex associate Eth1/1 命令。
D. 在 Po100 接口上發出 fex associate 100 命令。
E. 在 Po100 接口上發出 fex associate Eth1/2 命令。