CCNA 200-301

CCNP Enterprise

CCNP Security

CCIE Enterprise Lab

CCIE Security Lab

CCNP Service Provider

CCNP Data Center

CCNP Collaboration

CCIE DC Lab

It is not difficult to pass any IT exam on your first attempt. Thus, if you work hard, gather various preparation resources, seek advice from seasoned experts, and use dependable dumps from reputable providers, you should be able to easily do this.

Although some may consider the Cisco CCNA dumps 200-301 to be unusual on that list, the fact is that when used wisely and appropriately, they provide a great deal of value and assistance.

CCNA 200-301 dumps reflect the same structure as the actual evaluation. Since they are trained on special exam-like software, if you practice with these tools, you gain skills to answer the exact number of questions in a limited time. And in the case of the Cisco 200-301 exam, it’s only 120 minutes. SPOTO 200-301 exam dumps cover real exam questions and answers

Take a free 200-301 practice test to help you prepare for the exam.

CategoriesExam Code100% Pass Dumps
CCNA200-301CCNA 200-301
200-901 DevNet200-901 DevNet
200-201 Cyber Ops200-201 Cyber Ops

Customer service
Question: 1

An engineer needs to configure LLDP to send the port description time length value (TLV). What command sequence must be implemented?
A.switch(config-line)#IIdp port-description
B.switch(config)#IIdp port-description
C.switch(config-if)#IIdp port-description
D.switch#IIdp port-description

Correct Answer: B

QUESTION 2
Which function is performed by DHCP snooping?
A. propagates VLAN information between switches
B. listens to multicast traffic for packet forwarding
C. provides DDoS mitigation
D. rate-limits certain traffic

Correct Answer: A

QUESTION 3

What are two benefits of using the PortFast feature? (Choose two)
A. Enabled interfaces are automatically placed in listening state
B. Enabled interfaces come up and move to the forwarding state immediately
C. Enabled interfaces never generate topology change notifications.
D. Enabled interfaces that move to the learning state generate switch topology change notifications
E. Enabled interfaces wait 50 seconds before they move to the forwarding state

Answer: AB

QUESTION 4

An engineer must configure a WLAN using the strongest encryption type for WPA2- PSK. Which cipher fulfills the configuration requirement?
A.WEP
B.RC4
C.AES
D.TKIP

Answer: C

QUESTION 5

Which switch technology establishes a network connection immediately when it is plugged in?
A.PortFast
B.BPDU guard
C.UplinkFast
D.BackboneFast

Answer: C

ebook practice tests
QUESTION 6

What occurs when PortFast is enabled on an interface that is connected to another switch?

A.Spanning tree may fail to detect a switching loop in the network that causes broadcast storms
B.VTP is allowed to propagate VLAN configuration information from switch to switch automatically.
C.Root port choice and spanning tree recalculation are accelerated when a switch link goes down
D.After spanning tree converges PortFast shuts down any port that receives BPDUs.

Answer: A

QUESTION 7

Which two components are needed to create an Ansible script that configures a VLAN on a switch (Choose two)?

A.cookbook
B.task
C.playbook
D.model
E.recipe

Answer: CD

QUESTION 8

Which condition must be met before an NMS handles an SNMP trap from an agent?

A.The NMS software must be loaded with the MIB associated with the trap.

B.The NMS must be configured on the same router as the SNMP agent

C.The NMS must receive a trap and an inform message from the SNMP agent within a configured interval

D.The NMS must receive the same trap from two different SNMP agents to verify that it is reliable.
Answer: A

QUESTION 9

Which action is taken by a switch port enabled for PoE power classification override?

A. When a powered device begins drawing power from a PoE switch port a syslog message is generated
B. As power usage on a PoE switch port is checked data flow to the connected device is temporarily paused
C. If a switch determines that a device is using less than the minimum configured power it assumes the device has failed and disconnects
D.Should a monitored port exceeds the maximum administrative value for power, the port is shutdown and err-disabled

Answer: D

QUESTION 10

What is the function of a controller in controller-based networking?

A. It serves as the centralized management point of an SDN architecture.
B. It centralizes the data plane for the network.
C. It is the card on a core router that maintains all routing decisions for a campus.
D. It is a pair of core routers that maintain all routing decisions for a campus

Answer: A

Conclusion

It is entirely up to you whether or not to pursue Cisco CCNA certification. You also have the option of deciding if you need dumps for the 200-301 exam or whether you can get by without them. Regardless, one thing is clear: with the appropriate exam dumps, you have a better chance of passing the exam with flying colors. Get SPOTO CCNA 200-301 exam dumps to help you get CCNA certified on the first try.

Customer service

Latest passing report-100% pass guarantee

Related Cisco exam study materials 

Try 2021 Free 200-301 Practice Questions and Answers
Updated! Cisco CCNA 200-301 Test Questions and Answers Free for Download
Try Free Cisco CCNA 200-301 Test questions and answers
Latest Update-2021 Free CCNA 200-301 Exam Questions and Answers
Please follow and like us:
Last modified: November 5, 2024

Author

Comments

Write a Reply or Comment

Your email address will not be published.