The Designing Cisco Enterprise Wireless Networks (ENWLSD) 300-425 practice exam has been updated with 13 practice exam questions and answers to help you prepare well for the Cisco CCNP Enterprise 300-425 exam.
SPOTO experts spent a lot of time and energy researching Cisco 300-425 exam objectives to collect the most recent 300-425 practice questions. We guarantee that you will have a better understanding of the Designing Cisco Enterprise Wireless Networks (ENWLSD) 300-425 exam topics and patterns.
Test yourself with these 10 questions now!
QUESTION 1
An engineer must ensure that the new wireless LAN deployment can support seamless roaming between access points using a standard based on an amendment to the 802.11 protocol. Which protocol must the engineer select?
A. 802.11i
B. 802.11ac
C. 802.11r
D. 802.11e
Correct Answer: C
QUESTION 2
A wireless engineer is utilizing the voice readiness tool in Cisco Prime for a customer that wants to deploy Cisco IP
phones. Which dBm range is the network inspected against?
A. -78 to -65 dBm
B. -72 to -67 dBm
C. -85 to -65 dBm
D. -85 to -67 dBm
Correct Answer: D
QUESTION 3
An engineer is reducing the subnet size of the corporate WLAN by segmenting the VLAN into smaller subnets. Clients will be assigned a subnet by location. Which type of groups can the engineer use to map the smaller subnets to the corporate WLAN?
A. WLC port groups
B. RF groups
C. AP groups
D. interface groups
Correct Answer: D
QUESTION 4
During a client roaming event, which device is responsible for communicating the new Layer 2 EID mapping of a wireless supplicant to the fabric domain?
A. WLC
B. BN
C. CP2
D. CP1
Correct Answer: A
QUESTION 5
Which non-Wi-Fi interferer can be identified by Metageek Chanalyzer?
A. PDAs
B. jammers
C. smartphones
D. printers
Correct Answer: B
QUESTION 6
Which two considerations must a network engineer have when planning for voice over wireless roaming? (Choose two.)
A. Full reauthentication introduces gaps in a voice conversation.
B. Roaming time increases when using 802.1x + Cisco Centralized Key Manegement.
C. Roaming occurs when the phone has seen at least four APs.
D. Roaming occurs when the phone has reached -80 dBs or below.
E. Roaming with only 802.1x authentication requires full reauthentication.
Correct Answer: AE
QUESTION 7
When conducting a site survey for real-time traffic over wireless, which two design capabilities of smartphones and
tablets must be considered? (Choose two.)
A. no support for 802.11ac
B. higher data rates than laptops
C. fewer antennas than laptops
D. no support for 802.11r
E. lower data rates than laptops
Correct Answer: BC
QUESTION 8
An engineer must decide the cell overlap for a wireless voice deployment. Which Cisco measurement recommendation should be considered?
A. The edge of the cell should be -67 dBm.
B. The edge of the cell should be below 35 RSSI.
C. The measurement should be done on the 2.4-GHz band.
D. One AP should be deployed per 3000 square feet.
Correct Answer: A
QUESTION 9
A wireless deployment in a high-density environment is being used by vendors to process credit card payment
transactions via handheld mobile scanners. The scanners are having problems roaming between access points in the environment. Which feature on the wireless controller should have been incorporated in the design?
A. RX SOP
B. 802.11w
C. AP Heartbeat Timeout
D. Application Visibility Control
Correct Answer: A
QUESTION 10
An engineer has configured guest anchoring for a newly created SSD however, the mobility tunnels are not up, and
EPING is failing from the foreign WLC to the anchor WLC. Which traffic flow must be allowed at the firewall to enable the communication?
A. UDP port 16666
B. IP protocol 97
C. UDP port 97
D. TCP port 97
Correct Answer: A
QUESTION 11
Clustering Cisco WLCs into a single RF group enables the RRM algorithms to scale beyond the capabilities of a single Cisco WLC. How many WLC and APs in an RF group can the controller software scale up to in WLC release 8.9 depending on the platform?
A. up to 20 WLCs and 1000 APs
B. up to 20 WLCs and 3000 APs
C. up to 20 WLCs and 4000 APs
D. up to 20 WLCs and 6000 APs
Correct Answer: D
QUESTION 12
A customer is running a guest WLAN with a foreign/export-anchor setup. There is one anchor WLC in the US and two in Europe. Anchor WLC priorities are used to prefer local anchors. During a routine network audit, it is discovered that a large number of guest client sessions in the US are anchored to the WLCs in Europe. Which reason explains this behavior?
A. The foreign WLC failed and recovered.
B. The US anchor WLC failed and recovered.
C. The US anchor WLC is anchored to itself with a priority value of zero.
D. The anchor WLC is in the same mobility group.
Correct Answer: B
QUESTION 13
A customer is concerned about mesh backhaul link security. Which level of ecnryption does the backhaul link use?
A. hash
B. AES
C. WEP
D. 3DES
Correct Answer: B
Conclusion
If you want to get Cisco 300-425 certification, you should choose CCNP 300-425 exam dumps with offer to help you pass the CCNP 300-425 exam fast and quickly.
Comments