Ace your Cisco 300-425 ENWLSD Exam Quick with SPOTO

We understand how costly the Cisco Certified Network Professional (exam code: 300-425) exam may be. It is both time and money-consuming. We ensure that if you use the most accurate 300-425 test dumps material from SPOTO, you will pass the exam on the first try!

You may have concerns about the test format, the sorts of questions offered, the difficulty level of the questions, and the time required to finish the questions before taking the Cisco CCNP Enterprise (300-425) certification exam. These Cisco Certified Network Professional Enterprise (ENWLSD) example questions and practice exams can help you clear your concerns and prepare for the exam.

Categories	Exam Code	100% Pass Dumps
CCNP Enterprise	350-401 ENCOR
	300-410 ENARSI
	300-415 ENSDWI
	300-420 ENSLD
	300-425 ENWLSD
	300-430 ENWLSI
	300-435 ENAUTO

NO.1
Which UDP port numbers are used for exchange mobility packets in an AireOS wireless deployment?

A.UDP 16666 for control plane, EolP (IP protocol 97) for data plane
B.UDP 16668 for control plane, UDP 16667 for data plane
C.UDP 16667 for control plane, UDP 16666 for data plane
D.UDP 16666 for control plane, UDP 16667 for data plane

Answer: D

NO.2
A customer asks an engineer to explain the concept of mobility domains and mobility groups. Whichstatement does the engineer respond with?

A. A mobility group does not constrain the distribution of security context of a client and also doesnot constrain AP fail-over between controllers when the WLC are in the same mobility domain.
B.lf WLCs are in the same mobility domain, they communicate with each other but, if an anchorwLC is present it must be in the same mobility domain for communication to be possible.
C.If WLCs are in the same mobility domain, they communicate with each other. Mobility groupsconstrain the distribution of security context of a client and also constrain AP fail-over betweencontrollers.
D. WLCs do not need to be in the same mobility domain to communicate with each other. Mobilitygroups constrain the distribution of security context of a client and also constrain AP fail-over
between controllers.

Answer: C

NO.3

An engineer is designing a wireless deployment for a university auditorium. Which two features can be used to help deal with the issues introduced by high AP count? (Choose two.)

A.TSPEC
B.RXSOP
C. TPC
D.LSSE.DFS
Answer: CE

NO.4
A wireless engineer is designing a wireless network to support real-time applications over wireless. Which IEEE protocol must the engineer enables on the WLC so that the number of packets that are exchanged between an access point and client are reduced and fast roaming occurs?
A.802.11w
B.802.11r
C.802.11i
D.802.11k

Answer: B

NO.5
You need to perform a site survey for voice and real-time application support. What is the correct way to proceed?
A. Perform a data site survey first. Then multiply the AP density by 1.3.
B. Perform a data site survey, using a phone to measure the AP signal.
C. Perform a voice survey, testing calls to evaluate each cell edge.
D. Perform a standard survey, using voice RF parameters..

Answer: D

Categories	Exam Code	100% Pass Dumps
CCIE	CCIE EI Lab
	CCIE DC Lab
	CCIE Sec Lab
	CCIE SP Lab

NO.6
A single mobility group can have a maximum of how many controllers?
(Choose one.)
A. 10
B. 24
C. 50
D. 72

Answer: B

NO.7

How are wired clients connected to MAPs bridged through the mesh network?

A. They are encapsulated in CAPWAP and emerge on the configured VLAN on the controller.
B. Wired clients are not supported on a wireless mesh.
C. Wired traffic is not encapsulated in CAPWAP and is directed to the wired switch connected to the RAP.
D. Wired traffic is encapsulated in a special mesh frame header that is handled by the controller and then switched to the matching VLAN.

Answer: D

NO.8

What is the primary purpose of coverage in a hospital?
A. Staff mobile devices
B. Medical machines
C. Patient and guest Wi-Fi
D. All of the above
E. Can’t say without more information

Answer: E

No.9

A high-density area in a wireless design is determined by which one of the following things?
A. More clients are using the 5GHz band than the 2.4GHz band.
B. A small number of clients in an area are using high-bandwidth applications.
C. A higher number of clients associate with each AP in an area.
D. A higher amount of RF coverage is needed in an area.

Answer: C

No.10
When deploying higher throughput wireless technologies in Local mode, what design aspect must be considered related to possible oversubscription of the physical infrastructure?
A. Uplink capabilities of the access switch should be considered.
B. Physical connections between the access switch and AP should be considered.
C. Performance of the backbone network connecting to the controller should be aligned with overall wireless performance demands.
D. Performance capabilities of the controller should be considered.
E. All of the above.

Answer: E

Conclusion

Passing the 300-425 test is the best way to become one of the most in-demand professionals in your area. There is no better way to prepare for the Cisco 300-425 ENWLSD exam than to use our actual Cisco 300-425 ENWLSD questions.