Refer to the exhibit. Which statement about this configuration is true?

Refer to the exhibit. Router 1 has attempted to establish a Cisco MPLS TE tunnel to router 2, but the tunnel has failed.Which statement about this configuration is true?

Which cost is the default when redistributing routes from BGP to OSPF?

Which statement about enabling segment routing for IGPs is true?

Refer to the exhibit. A network operator is working to deploy a Unified BGP design and allow it to be available only inselected markets and services in the future. The label allocation is not functioning as desired.Which action will fix the issue?

Refer to the exhibit. Routers within the cluster are not receiving the desired prefixes. What must be done to fix the issue?

Which two conditions must be met before separate ISPs can provide interdomain multicast routing? (Choose two.)

Refer to the exhibit. A network operator is working to filter routes from being advertised that are covered under an aggregate announcement. The receiving router of the aggregate announcement block is still getting some of the more specific routes plus the aggregate. Which configuration change ensures that only the aggregate is announced now and in the future if other networks are to be added?

Refer to the exhibit. While configuring router 2 with all the default values, a network engineer cannot see any route receivedin router 1. How should the engineer solve the issue?

Refer to the exhibit. An engineer applied the summarization configuration on R1 for four networks (192.168.20.0/24 to192.168.23.0/24) in area 1 and eight networks (192.168.32.0/24 to 192.168.39.0/24) in area 2 to stop the flooding of all thecustomer routes. While checking the routing table of R2, the engineer noticed that R1 is still sending only specific routes toR2. Which configuration should the engineer apply on R1 to summarize routes?

Refer to the exhibit. An engineer applied the configuration on R1 to prevent network 192.168.1.0/24 from being propagatedoutside of area 5. After the change, users have reported they are not able to access any of the application servers that wereworking before. While checking the routing table of the peer router, the engineer notices R1 stopped propagating any routesoutside area 5. Which action must be taken to fix the problem?

You have configured routing policies on a Cisco IOS XR device with routing policy language. Which two statements about the routing policies are true? (Choose two.)

Which statement about BFD on Cisco IOS XR Software is true?

After an engineer configures BGP in R1, it starts receiving this message:Which action makes the peering come back up again?

In a PIM-SM environment, which mechanism determines the traffic that a receiver receives?

Refer to the exhibit. P1 and PE3 Cisco IOS XR routers are directly connected and have this configuration applied. The BGP session is not coming up. Assume that there is no IP reachability problem and both routers can open tcp port 179 to each other. Which action fixes the issue?

Refer to the exhibit. Routers R1 and R2 cannot form a neighbor relationship, but the network is otherwise configured correctly and operating normally. Which two statements describe the problem? (Choose two.)