A green data center is being deployed and a design requirement is to be able to readily scale server virtualization. Which IETF standard technology can provide this requirement?

An architect designs a multi-controller network architecture with these requirements: - Achieve fast failover to control traffic when controllers fail. - Yield a short distance and high resiliency in the connection between the switches and the controller. - Reduce connectivity loss and enable smart recovery to improve the SDN survivability. - Improve connectivity by adding path diversity and capacity awareness for controllers. Which control plane component of the multi-controller must be built to meet the r

How many fully established neighbour relationships exist on an Ethernet with five routers running OSPF as network type broadcast?

Which two descriptions of CWDM are true? (Choose two)

Which two statements describe the hierarchical LAN design model? (Choose two)

Which two application requirements are mandatory tor traffic to receive proper treatment when placed in the priority queue? (Choose two.)

Which two conditions must be met for EIGRP to maintain an alternate loop-free path to a remote network? (Choose two.)

A network design includes a long signaling delay in notifying the Layer 3 control plane that an interface has failed. Which two of these actions would reduce that delay? (Choose two.)

Which option is a fate-sharing characteristic in regards to network design?

Company XYZ runs OSPF in their network. A design engineer decides to implement hot-potato routing architecture. How can this implementation be achieved?

Two enterprise networks must be connected together. Both networks are using the same private IP addresses. The client requests from both sides should be translated using hide NAT (dynamic NAT) with the overload feature to save IF addresses from the NAT pools. Which design addresses this requirement using only one Cisco I OS NAT router for both directions?

An MPLS service provider is offering a standard EoMPLS-based VPLS service to CustomerA providing Layer 2 connectivity between a central site and approximately 100 remote sites. CustomerA wants to use the VPLS network to carry its internal multicast video feeds which are sourced at the central site and consist of 20 groups at Mbps each. Which service provider recommendation offers the most scalability?

You are designing a network running both IPv4 and IPv6 to deploy QoS Which consideration is correct about the QoS for IPv4 and IPv6?

Company XYZ is in the process of identifying which transport mechanism(s) to use as their WAN technology. Their main two requirements are. - a technology that could offer DPI, SLA, secure tunnels, privacy, QoS, scalability, reliability, and ease of management - a technology that is cost-effective Which WAN technology(ies) should be included in the design of company XYZ?

Company XYZ connects its sites over a private WAN. Their overlay network is running a DMVPN setup where the headquarters site is the hub. The company is planning on implementing multicast routing on the network. What should be used in the multicast routing design?

A BGP route reflector in the network is taking longer than expected to coverage during large network changes. Troubleshooting shows that the router cannot handle all the TCP acknowledgements during route updates. Which action can be performed to tune the device performance?

You have been tasked with designing a data center interconnect to provide business continuity. You want to encrypt the traffic over the DCI using IEEE 802.1AE MACsec to prevent the deployment of any firewall or IPS. Which two interconnect technologies support MACsec? (Choose two.)

The network designer needs to use GLOP IP address in order make them unique within their ASN, which multicast address range will be considered?

You want to split an Ethernet domain in two. Which parameter must be unique in this design to keep the two domains separated?