لا تريد أن تفوت شيئا؟

نصائح اجتياز امتحان الشهادة

آخر أخبار الامتحانات ومعلومات الخصم

برعاية وحديثة من قبل خبرائنا

نعم، أرسل لي النشرة الإخبارية

خذ اختبارات أخرى عبر الإنترنت
السؤال #1
A user has set up an IP SLA probe to test if a non SLA host web server on IP address 10.1.1.1 accepts HTTP sessions prior to deployment. The probe is failing. Which action should the network administrator recommend for the probe to succeed?
A. Re-issue the ip sla schedule command
B. Add the control disable option to the tcp connect
عرض الإجابة
اجابة صحيحة: BC
السؤال #2
An engineer needs dynamic routing between two routers and is unable to establish OSPF adjacency. The output of the show ip ospf neighbor command shows that the neighbor state is EXSTART/EXCHANGE. Which action should be taken to resolve this issue?
A. match the passwords
B. match the hello timers C
عرض الإجابة
اجابة صحيحة: D
السؤال #3
Why is the remote NetFlow server failing to receive the NetFlow data?
A. The flow exporter is configured but is not used
B. The flow monitor is applied in the wrong direction
عرض الإجابة
اجابة صحيحة: D
السؤال #4
BGP is flapping after the CoPP policy is applied. What are the two solutions to fix the issue? (Choose two.)
A. Configure a higher value for CIR under the Class COPP-CRITICAL-7600
B. Configure a higher value for CIR under the default class to allow more packets during peak traffic
E. Configure a three-color policer instead of two-color policer under Class COPP-CRITICAL-7600
عرض الإجابة
اجابة صحيحة: D
السؤال #5
A network administrator is discovering a Cisco Catalyst 9300 and a Cisco WLC 3504 in Cisco DNA Center. The Catalyst 9300 is added successfully. However, the WLC is showing error "uncontactable" when the administrator tries to add if in Cisco DNA Center. Which action discovers WLC in Cisco DNA Center successfully?
A. Delete the WLC 3504 from Cisco DNA Center and add it to Cisco DNA Center again
B. Add the WLC 3504 under the hierarchy of the Catalyst 9300 connected devices
عرض الإجابة
اجابة صحيحة: B
السؤال #6
An administrator that is connected to the console does not see debug messages when remote users log in. Which action ensures that debug messages are displayed for remote logins?
A. Enter the transport input ssh configuration command
B. Enter the terminal monitor exec command
عرض الإجابة
اجابة صحيحة: C
السؤال #7
What does the PE router convert the IPv4 prefix to within an MPLS VPN?
A. eBGP path association between the PE and CE sessions
B. prefix that combines the ASN, PE router-id, and IP prefix C
عرض الإجابة
اجابة صحيحة: D
السؤال #8
A network administrator is troubleshooting OSPF adjacency issue by going through the console logs in the router, but due to an overwhelming log messages stream, it is impossible to capture the problem. Which two commands reduce console log messages to relevant OSPF neighbor problem details so that the issue can be resolved? (Choose two.)
A. debug condition ospf neighbor
B. debug condition interface C
عرض الإجابة
اجابة صحيحة: AB
السؤال #9
R1 is being monitored using SNMP and monitoring devices are getting only partial information. What action should be taken to resolve this issue?
A. Modify the CoPP policy to increase the configured exceeded limit for SNMP
B. Modify the access list to include snmptrap
عرض الإجابة
اجابة صحيحة: C
السؤال #10
A network administrator wants to block all traffic toward the Internet after business hours and on weekends. When the administrator applies an access list on interface Gi0/1, all traffic is blocked and there is no access to the Internet at any time. Which action resolves the issue? A.Add the permit ip any any time-range no-conn statement after the deny udp any any time-range no-conn command in the access list. B.Add the permit ip any any statement after the deny icmp any any time-range no-conn command in th
A network administrator wants to block all traffic toward the Internet after business hours and on weekends. When the administrator applies an access list on interface Gi0/1, all traffic is blocked and there is no access to the Internet at any time
عرض الإجابة
اجابة صحيحة: D
السؤال #11
Which IGPs are supported by the MPLS LDP autoconfiguration feature? A.ISIS and RIPv2 B.RIPv2 and OSPF C.OSPF and EIGRP D.OSPF and ISIS
Which IGPs are supported by the MPLS LDP autoconfiguration feature? A. SIS and RIPv2 B
عرض الإجابة
اجابة صحيحة: C
السؤال #12
An engineer is configuring a network and needs packets to be forwarded to an interface for any destination address that is not in the routing table. What should be configured to accomplish this task?
A. set ip next-hop
B. set ip default next-hop C
عرض الإجابة
اجابة صحيحة: D
السؤال #13
Which two actions restrict access to router R1 by SSH? (Choose two.) A.Remove class-map ANY from service-policy CoPP.
B. Configure transport output ssh on line vty and remove sequence 20 from access list 100
E. Configure transport output ssh on line vty and remove sequence 10 from access list 199
عرض الإجابة
اجابة صحيحة: AC
السؤال #14
An engineer configured the wrong default gateway for the Cisco DNA Center enterprise interface during the install. Which command must the engineer run to correct the configuration?
A. sudo maglev-config update
B. sudo maglev install config update C
عرض الإجابة
اجابة صحيحة: A
السؤال #15
When provisioning a device in Cisco DNA Center, the engineer sees the error message "Cannot select the device. Not compatible with template". What is the reason for the error? A.The template has an incorrect configuration. B.The software version of the template is different from the software version of the device. C.The changes to the template were not committed. D.The tag that was used to filter the templates does not match the device tag.
When provisioning a device in Cisco DNA Center, the engineer sees the error message "Cannot select the device. Not compatible with template"
عرض الإجابة
اجابة صحيحة: D
السؤال #16
An IPv6 network was newly deployed in the environment and the help desk reports that R3 cannot SSH to the R2s Loopback interface. Which action resolves the issue?
A. Modify line 10 of the access list to permit instead of deny
B. Remove line 60 from the access list
عرض الإجابة
اجابة صحيحة: B
السؤال #17
How are MPLS Layer 3 VPN services deployed? A.The RD and RT values must match under the VRF.
B. The import and export RT values under a VRF must always be the same
عرض الإجابة
اجابة صحيحة: A
السؤال #18
A client is concerned that passwords are visible when running thisshow archive log config all. Which router configuration is needed to resolve this issue?
A. MASS-RTR(config)#aaa authentication arap
B. MASS-RTR(config-archive-log-cfg)#password encryption aes C
عرض الإجابة
اجابة صحيحة: D
السؤال #19
While working with software images, an engineer observes that Cisco DNA Center cannot upload its software image directly from the device. Why is the image not uploading?
A. The device must be resynced to Cisco DNA Center
B. The software image for the device is in install mode
عرض الإجابة
اجابة صحيحة: B
السؤال #20
AAA server 10.1.1.1 is configured with the default authentication and accounting settings, but the switch cannot communicate with the server. Which action resolves this issue?
A. Correct the timeout value
B. Match the authentication port
عرض الإجابة
اجابة صحيحة: B
السؤال #21
What is an advantage of using BFD?
A. It detects local link failure at layer 1 and updates routing table
B. It detects local link failure at layer 3 and updates routing protocols
عرض الإجابة
اجابة صحيحة: B
السؤال #22
An engineer has configured DMVPN on a spoke router. What is the WAN IP address of another spoke router within the DMVPN network?
A. 172
B. 172
عرض الإجابة
اجابة صحيحة: B
السؤال #23
Which interface configuration must be configured on the HUB router to enable MVPN with mGRE mode?
A. interface Tunnel0 description mGRE - DMVPN Tunnel ip address 10
B. interface Tunnel0 description mGRE - DMVPN Tunnel ip address 10
عرض الإجابة
اجابة صحيحة: B
السؤال #24
An engineer wanted to set a tag of 30 to route 10.1.80.65/32 but it failed. How is the issue fixed?
A. Modify route-map ospf-to-eigrp permit10 and match prefix-list ccnp2
B. Modify prefix-list ccnp3 to add 10
عرض الإجابة
اجابة صحيحة: A
السؤال #25
An engineer configured SNMP notifications sent to e management server using authentication and encrypting data with DES. An error in e response PDU is received as "UNKNOWNUSERNAME, WRONGDIGEST". Which action resolves the issue?
A. Configure the correct authentication password using SNMPv3 authNoPriv
B. Configure correct authentication and privacy passwords using SNMPv3 authPriv
عرض الإجابة
اجابة صحيحة: C
السؤال #26
R1 is connected with R2 via GigabitEthernet0/0, and R2 cannot ping R1. What action will fix the issue?
A. Fix route dampening configured on the router
B. Replace the SFP module because it is not supported
عرض الإجابة
اجابة صحيحة: C
السؤال #27
What are two functions of IPv6 Source Guard? (Choose two.)
A. It works independent from IPv6 neighbor discovery
B. It denies traffic from unknown sources or unallocated addresses
E. It blocks certain traffic by inspecting DHCP packets for specific sources
عرض الإجابة
اجابة صحيحة: BC
السؤال #28
An engineer receives this error message when trying to access another router in-band from the serial interface connected to the console of R1. Which configuration is needed on R1 to resolve this issue?
A. R1(config)#line vty 0 R1(config-line)# transport output ssh
B. R1(config)#line console 0 R1(config-line)# transport output ssh C
عرض الإجابة
اجابة صحيحة: D
السؤال #29
Network operations cannot read or write any configuration on the device with this configuration from the operations subnet. Which two configurations fix the issue? (Choose two.)
A. Configure SNMP rw permission in addition to community ciscotest
B. Modify access list 1 and allow operations subnet in the access list
E. Configure SNMP rw permission in addition to community ciscotest 1
عرض الإجابة
اجابة صحيحة: AB
السؤال #30
The server for the finance department is not reachable consistently on the 200.30.40.0/24 network and after every second month it gets a new IP address. What two actions must be taken to resolve this issue? (Choose too.)
A. Configure the server to use DHCP on the network with default gateway 200
B. Configure the server with a static IP address and default gateway
E. Configure the router to exclude a server IP address and default gateway
عرض الإجابة
اجابة صحيحة: B

عرض الإجابات بعد التقديم

يرجى إرسال البريد الإلكتروني الخاص بك والواتس اب للحصول على إجابات الأسئلة.

ملحوظة: يرجى التأكد من صلاحية معرف البريد الإلكتروني وWhatsApp حتى تتمكن من الحصول على نتائج الاختبار الصحيحة.

بريد إلكتروني:
رقم الواتس اب/الهاتف:


Copyright © 2024. Designer by SPOTO Official Website. All Rights Reserved.