不想錯過任何事？

通過認證考試的技巧

最新考試新聞和折扣資訊

由我們的專家策劃和更新

是的，請向我發送時事通訊

查看其他面試題
1
參考答案
The answer to this question can give you insights about their understanding of wireless security protocols, their proactive approach, and their ability to handle cybersecurity issues.
2
參考答案
The candidate should specify their hands-on experience with Cisco management tools and controllers, including configuration, monitoring, and troubleshooting.
職涯加速

考取認證，讓履歷脫穎而出。

數據分析顯示，持有 IT 認證的從業者年薪平均比求職者高出 26%。在 SPOTO，您可以同時備考認證與準備面試，加速職涯成長。

1 100% 通過率
2 2 週題庫練習
3 通過認證考試
全球認可 100 萬+ 已認證 邊工作邊學習
制定學習計劃
3
參考答案
Candidates are expected to identify critical RF system parameters like power levels, signal-to-noise ratio, and others that need regular monitoring to prevent failures, revealing their preventive mindset and understanding of RF system operation.
4
參考答案
- DTPC: Adjusts transmit power of APs and clients to ensure balanced communication and save battery life.
5
參考答案
802.1x: IEEE standard for port-based network access control, providing an authentication framework for wireless LANs. It authenticates devices wishing to attach to a LAN or WLAN through a central authority.
6
參考答案
“At Vodacom, we faced a significant issue with dropped connections in a high-density area. I led a team to conduct a thorough site survey, identifying interference from nearby structures. We implemented additional access points and adjusted channel allocations, leading to a 70% decrease in dropped connections. This experience emphasized the importance of a systematic approach and collaboration in troubleshooting.”
7
參考答案
Make sure there is overlap between neighboring points to balance loads and ensure network resilience.
8
參考答案
High client density can lead to network congestion and reduced performance due to increased competition for bandwidth and increased interference. Proper network design, including adequate access point placement and capacity planning, is essential to manage client density effectively.
9
參考答案
The question seeks to assess the candidate's skill in making critical decisions when faced with constraints, ensuring both optimal functionality and regulatory alignment.
10
參考答案
The 2.4 GHz band offers longer range but is more susceptible to interference and congestion from other devices (e.g., microwaves, Bluetooth). The 5 GHz band provides faster speeds and less interference but has a shorter range and lower penetration through obstacles.
11
參考答案
I would first investigate the network logs to identify the failure cause. Then, I would inform users about the issue and expected time for resolution. I'd implement a backup communication method and bring in the technical team for a swift diagnosis and fix.
12
參考答案
“At Orange, I led a deployment of a large-scale Wi-Fi network in a city center. We faced significant interference from existing infrastructure. I coordinated a site survey and adjusted the channel plans to mitigate interference, resulting in a 30% increase in user connectivity. This experience taught me the importance of thorough site assessments and collaborative problem-solving with local authorities.”
13
參考答案
Talk about the different entities involved like the authenticator, endpoint, authentication server etc.
14
參考答案
Wireless site surveying helps identify critical factors such as signal strength distribution, coverage areas, sources of interference, and the optimal placement for access points. These insights allow fine-tuning the network to enhance signal coverage, minimize dead zones, reduce interference, and efficiently handle the expected number of users and devices. Identifying dead zones early prevents frustration later.
15
參考答案
I measure performance with Wi-Fi analyzers to check signal strength and coverage areas. I also monitor throughput and latency to identify any bottlenecks. By adjusting channel settings, I can reduce interference, and I implement QoS to ensure key applications perform optimally.
16
參考答案
Interviewers should listen for practical solutions to RF circuit instability. The candidate should mention common issues, like oscillations or signal drift, and how they maintain stability, such as ensuring correct component values, biasing, or using feedback loops. They should also share specific examples of when they've encountered and resolved stability issues.
17
參考答案
Networking specialists offer expertise and experience in radio frequency behaviour, interference types, and wireless standards; they use advanced calibrated, industry-grade survey tools for precise data; they complete the job quickly and accurately, minimizing disruption; they provide tailored solutions based on your unique environment; and they consider future-proofing for scalability, security, and emerging technologies. However, smaller offices with simple needs may find basic DIY surveys helpful as a starting point.
18
參考答案
Higher transmit power extends the coverage area of an access point, allowing it to reach more devices and cover a larger space. However, excessive power can lead to interference with other networks and reduce overall performance.
19
參考答案
A MAC (Media Access Control) address is a unique identifier assigned to network interfaces for communication on a physical network. In wireless networks, it is used to identify devices and manage communication between them.
20
參考答案
Network teams can conduct basic site surveys using free or inexpensive software installed on a laptop or tablet. Specialized hardware and software can cost thousands of dollars but produce a detailed picture of network operations. Specialized survey tools can gather and display information about the wireless environment, communicate with APs to gather information about the signals they produce, and query end-user equipment about received signal strength and data rates.
21
參考答案
The six steps for a wifi site survey are: - Review of floor plans and layouts - Review access points based on power and current cabling in the premises - Design engineers estimate how many access points your building/location will need based on steps 1 and 2 - Once all steps are completed, estimates are put through survey software - Review the recommendations as provided in the software and adjust access points as required based on locations, blackspots and any other variables - You will then receive a report with findings and recommendations.
22
參考答案
Candidates should elucidate on the factors that influence bandwidth needs, such as data rate, modulation type, and FCC regulations, showcasing their capacity to apply these factors in practical scenarios.
23
參考答案
A WiFi survey measures more than whether a signal is present. It looks at coverage, signal strength, interference, noise, channel behavior, and access point placement. In many cases, it also helps assess whether the network can support the number of devices and applications in the space.
24
參考答案
The candidate should detail their experience with Single Sign-On implementations, including protocols like SAML or RADIUS, and integration with network access control.
25
參考答案
The candidate should describe a specific project with changing requirements, how they adapted the plan, managed stakeholder expectations, and implemented solutions.
26
參考答案
In my last role, I led a wireless network upgrade project for a major client. We had key milestones including the site survey, equipment installation, and final testing. I utilized Gantt charts to track progress and held weekly status meetings to ensure everyone was aligned. When we faced delays due to equipment shipping issues, I quickly adjusted the schedule and brought on additional resources to meet the final deadline. The project was completed successfully and on time, leading to a 30% improvement in network performance.
27
參考答案
A cadastral survey focuses on determining and defining land boundaries for property ownership. It involves establishing accurate property lines, monuments, and legal descriptions. Cadastral surveys are essential for: - Land Registration: Recording property ownership and boundaries in official land records. - Property Transactions: Ensuring accurate property descriptions and boundaries during buying, selling, or transferring property. - Land Management: Managing land parcels and ensuring proper boundaries between neighboring properties. - Taxation: Assessing property value and determining property taxes based on accurate land measurements.
28
參考答案
These surveys report information on APs and their characteristics, signal strength, signal-to-noise ratios and interference. They might reveal marginal performance changes before users notice.
29
參考答案
The candidate should describe a process involving spectrum analysis, site surveys, checking for interference sources, and adjusting RF parameters like channel and power.
30
參考答案
The candidate should discuss common design challenges such as coverage, capacity, interference, scalability, or integration with existing infrastructure.
31
參考答案
To perform a wireless site survey with NetSpot: 1. Download and activate NetSpot (Home, PRO, or Enterprise). 2. Launch NetSpot and switch to Survey mode. 3. Start a new survey by naming the project and importing or drawing a map. 4. Scan the surveyed area by moving from place to place until the whole area is covered. 5. Analyze the results using heatmaps to see signal weakness and other parameters.
32
參考答案
The candidate should list tools they have used, such as Wireshark, Ekahau, or AirMagnet, and explain their preference based on features, ease of use, or effectiveness.
33
參考答案
QoS refers to the prioritization of certain types of traffic or users in a wireless network to ensure reliable service, especially for latency-sensitive applications like voice and video. It is achieved through traffic management, resource allocation, and scheduling.
34
參考答案
Wi-Fi 7 was released in early 2024. Your understanding of and familiarity with Wi-Fi 7 stands as an important talking point in wireless network engineering interviews. Indeed, hiring managers evaluate candidates' understanding of new and upcoming standards and their potential impact on network infrastructure. Hiring managers want to be sure that a candidate works to learn as much as possible about emerging technologies, so when answering questions about Wi-Fi 7, highlight major improvements over its predecessors. Remember, the key to nailing these tougher questions is to demonstrate your depth of understanding while still communicating clearly and concisely. Managers are looking for candidates who can not only grasp complex concepts but also explain them to others.
35
參考答案
Candidates should explain methods for managing multiple projects, such as using prioritization matrices or project management software, and how these methods help allocate resources efficiently.
36
參考答案
The candidate should discuss their understanding of RF propagation models, factors affecting signal strength, and techniques to mitigate interference.
37
參考答案
The different types of wireless site surveys are: - Active site survey: Allows the client device to connect to an access point to measure signal strength, throughput, noise and other signal characteristics. This method uses data frames signal characteristics and does not allow scanning neighbor wireless networks. - Passive site survey: Allows the client device to scan the RF environment based on enabled channels, capturing all available wireless signals and characteristics like CCI/ACI/SNR. It uses beacons from access points to measure RSSI values. - Predictive site survey: Conducted by RF software performing data modeling based on inputs provided by the engineer. It typically gives 75-85% accuracy and can go higher depending on input quality.
38
參考答案
- CAPWAP vs LWAPP: CAPWAP supports both IPv4 and IPv6, provides better security, and uses DTLS, whereas LWAPP only supports IPv4 and is less secure.
39
參考答案
His question will reveal the candidate's abilities to plan, design, implement, and manage upgrades. It's an opportunity to understand their project management skills as well.
40
參考答案
The candidate should identify key standards such as FCC, IC, CE, and any other relevant regulatory bodies. Expect a detailed explanation of how they integrate compliance into their design process, showing their in-depth understanding of regulatory requirements.
41
參考答案
“At Deutsche Telekom, I managed the rollout of a new wireless network for a large urban area. We faced significant challenges with signal interference and tight project deadlines. I implemented a phased approach, conducting thorough site surveys to identify coverage gaps and coordinating with local authorities to expedite permits. As a result, we completed the project 15% under budget and improved network performance by 30%, exceeding customer satisfaction metrics.”
42
參考答案
With WiFi 6E using the 6 GHz band and WiFi 7 introducing 320 MHz-wide channels and Multi-Link Operation, you need real data from the environment. A proper wireless site survey helps keep roaming smooth, put access points in the right spots, control interference, check signal quality (not just strength), and get real performance from the 6 GHz band.
43
參考答案
Antennas are used to transmit and receive wireless signals between devices. They convert electrical signals into radio waves and vice versa, enabling communication over the air. Different types of antennas (e.g., omnidirectional, directional) are used based on the network design and coverage requirements.
44
參考答案
Looking for candidates to detail their strategies for staying informed on regulatory updates, such as subscribing to relevant newsletters, attending seminars, or participating in industry groups. This reflects their commitment to ongoing compliance.
45
參考答案
This question assesses your knowledge of how data is encoded for wireless transmission. Managers want to see that you understand the evolution of these schemes and their roles in different 802.11 standards. Provide a high-level explanation of each scheme, differentiating between them.
46
參考答案
Wi-Fi security protects wireless networks from unauthorized access and data breaches. Common security protocols include: - - WEP (Wired Equivalent Privacy): An older and less secure protocol. - WPA (Wi-Fi Protected Access): Provides improved security over WEP. - WPA2: Uses AES encryption for stronger security. - WPA3: Offers enhanced security features and protection against brute-force attacks.
47
參考答案
Skipping a site survey could result in larger costs due to the extra cost of buying and installing more APs than needed. Not installing enough APs might result in user complaints of poor performance. Adding more units and moving existing ones later are more expensive than installing the right number in the right places initially.
48
參考答案
- World Mode: Adjusts channel and power settings of client devices based on geographic location.
49
參考答案
The candidate should discuss common beamforming issues, such as improper calibration, client compatibility, or interference from physical obstructions.
50
參考答案
The five types of Wi-Fi site surveys are: Wi-Fi Design Survey, Pre-Deployment Site Survey (AP on a Stick Survey), Post-Deployment Site Survey, Health Check Survey, and Troubleshooting Wi-Fi Survey.
51
參考答案
A coverage survey is required when a company needs to ensure their WLAN provides excellent signal strength and quality for as many users as possible, covering the largest possible area. Because this type of assessment prioritises the number of users supported over data throughput, it is most often used to determine where additional wireless access points are required. Building obstructions such as elevators, steel beams and concrete walls can create dead spots in your coverage area, which can be fixed by adding access points or using a wireless network extender.
52
參考答案
Candidate must demonstrate understanding of the importance of cross-discipline communication and describe techniques or tools they use to encourage collaboration and information sharing.
53
參考答案
Bearing is the horizontal angle measured clockwise from a north reference line (either true north or magnetic north) to a specific direction. It is used to define the direction of a survey line or the location of a point relative to a reference point. Bearings are typically expressed in degrees, minutes, and seconds (DMS) or in decimal degrees.
54
參考答案
Frequency reuse is a technique used in cellular networks to maximize spectrum efficiency by allowing the same frequencies to be used by different cells in a network. These cells are geographically separated to minimize interference.
55
參考答案
MU-MIMO (Multi-User, Multiple Input, Multiple Output) allows a wireless access point to communicate with multiple devices simultaneously, rather than sequentially. This technology enhances performance by increasing the efficiency and speed of data transmission for multiple users.
56
參考答案
A reference point is a fixed point on the ground that has been established and marked with known coordinates or elevation. It serves as a starting point for measurements and provides a framework for locating other points within a survey. Reference points can be natural features, existing monuments, or specifically established markers.
57
參考答案
Conducting a wireless site survey requires a suite of specialized tools, each serving a unique purpose in evaluating and optimizing the wireless network environment. To achieve a thorough and actionable survey, Nile's on-site surveyors use the following essential tools: Wi-Fi Analyzers: These are critical for measuring signal strength and quality across different areas. They help in identifying dead zones, areas of weak signal, and places with strong signal coverage. Additionally, Wi-Fi analyzers can detect overlapping channels and sources of Wi-Fi interference, allowing for more strategic placement of access points. Spectrum Analyzers: These tools go beyond Wi-Fi signals to detect interference from a variety of electronic devices such as microwaves, Bluetooth devices, and cordless phones. This broader scope is crucial for identifying non-Wi-Fi interference that could impact wireless network performance. Site Survey Software: This software is instrumental in creating detailed heat maps that visually represent the Wi-Fi signal strength throughout the surveyed area. These heat maps are invaluable for planning the layout of access points and understanding the overall signal distribution. Directional Antennas: For advanced surveys, especially in complex environments, directional antennas can be used to precisely locate the source of specific signal issues. This is particularly useful in large or dense areas where pinpointing exact problem spots is challenging. Network Testing Equipment: These tools, such as throughput testers and packet analyzers, provide deeper insights into the network's performance, helping to diagnose issues like packet loss or bandwidth bottlenecks.
58
參考答案
A WiFi survey is the full assessment process, while a heatmap is one of the outputs. The heatmap visually shows signal coverage and performance patterns across the floor plan, helping teams identify weak areas, overlap, and potential interference.
59
參考答案
During a wireless site survey, the following statistics are collected: - Signal Strength run. - Noise (electrical, not audio) - Signal to Noise Ratio (SNR) – (This determines the minimum signal needed for given applications to run effectively) - Bandwidth
60
參考答案
The candidate should enumerate the simulation tools they are adept at using (e.g., CST, ADS, HFSS) and explain their approach to validating simulation results against real-world measurements.
61
參考答案
Common types of control surveys include: - Horizontal Control Surveys: Determine the horizontal positions of control points, typically using precise angle and distance measurements. - Vertical Control Surveys: Establish elevations of control points using leveling techniques. - Geodetic Control Surveys: Account for the Earth's curvature and establish a network of control points for large-scale projects. - GPS Control Surveys: Utilize GPS receivers to determine accurate coordinates for control points.
62
參考答案
The 802.11n standard improves wireless network performance by introducing features like MIMO (Multiple Input, Multiple Output), channel bonding, and higher data rates. It enhances throughput, range, and reliability compared to previous standards.
63
參考答案
Pros: Robust and detailed reporting capabilities; supports a broad range of Wi-Fi standards and devices; real-time spectrum and interference analysis; user-friendly interface with flexible graphic displays. Cons: Can be complex for beginners, requiring some training; higher cost compared to some competitors; occasional complaints about the user interface being less modern.
64
參考答案
The candidate should demonstrate an understanding of the Smith Chart, its purpose, and its application in impedance matching, reflection coefficient plotting, and other aspects of RF circuit design.
65
參考答案
Programming skills are increasingly becoming essential in the world of wireless engineering. The candidate's answer will give insights into how they apply coding skills to optimize wireless networks or systems.
66
參考答案
What does the current networking infrastructure like? Does it need to be rebuilt from the ground up? Can you use it as a base and expand on it? Where can you install wireless access points and how close are those to existing wired network closets and other infrastructure elements?
67
參考答案
Mechanisms Include: WEP, WPA, WPA2, EAP, MAC authentication.
68
參考答案
The candidate should recount a complex troubleshooting scenario, the steps taken to resolve it, and the lessons learned.
69
參考答案
The candidate is expected to recount a challenging RF circuit they designed, explain the complexities involved (e.g., high frequency, low noise), and the techniques they used to ensure its functionality.
70
參考答案
The average annual salary according to Payscale.com, for a freelance wireless survey technician ranges from $26,446 – $52,130.
71
參考答案
A WiFi survey is the process of evaluating a physical environment to design, validate, or improve a wireless network. It helps identify signal strength, coverage gaps, interference, and the best placement for access points so the network performs reliably across the site.
72
參考答案
Cognitive radio is an intelligent wireless communication system that dynamically adapts its transmission or reception parameters based on the environment to avoid interference and optimize spectrum use. It is used in dynamic spectrum access and next-generation wireless networks.
73
參考答案
In my previous role, we faced frequent signal dropouts in a large warehouse. I developed a mesh network solution that utilized low-power devices to create a robust coverage area. This reduced dead spots, resulting in a 30% decrease in signal-related complaints and improved operational efficiency.
74
參考答案
The candidate should describe a systematic approach, such as gathering information, analyzing logs, using diagnostic tools, and isolating the root cause.
75
參考答案
The main types of WiFi surveys are passive, active, and predictive. A passive survey scans the wireless environment without joining the network. An active survey connects to the network to measure real-world performance. A predictive survey uses floor plans and modeling software to estimate coverage and access point placement before installation.
76
參考答案
There are three types of site surveys: - Passive: WLAN traffic is monitored to detect possible access points and measure the signal strength and noise level. - Active: Wireless adapters are associated with multiple access points to check the performance post-deployment of the wireless network. If any error is found for data transfer, then it can be fixed. - Predictive: RF modeling is created using mockup tools. Virtual access points are placed on the given area of the network to estimate the expected coverage.
77
參考答案
The key steps are reviewing floor plans, identifying coverage areas, determining the number of access points needed, testing coverage, troubleshooting issues, and rescheduling future testing as needs change.
78
參考答案
The candidate should share a specific WLAN design project, including objectives, challenges, and the successful outcome such as improved coverage or capacity.
79
參考答案
FHSS (Frequency Hopping Spread Spectrum) is used for low-interference environments or legacy systems, while DSSS (Direct Sequence Spread Spectrum) is used for higher data rates and better performance in noisy environments.
80
參考答案
Common Wi-Fi protocols include 802.11a, 802.11b, 802.11g, and 802.11n. 802.11a operates in the 5 GHz band with speeds up to 54 Mbps, 802.11b operates in the 2.4 GHz band with speeds up to 11 Mbps, 802.11g operates in the 2.4 GHz band with speeds up to 54 Mbps, and 802.11n operates in both 2.4 GHz and 5 GHz bands with speeds up to 600 Mbps using MIMO technology.
81
參考答案
This question measures the candidate's ability to understand the broader implications of RF engineering projects, including environmental concerns and how they align with regulatory compliance.
82
參考答案
These measurements include signal strength, throughput, round-trip time, packet loss and retransmission rate throughout the area where the signal is used. Active site surveys also measure upstream and downstream data rates.
83
參考答案
Spectrum efficiency is the ability to transmit the maximum amount of data over a given bandwidth. It is measured in bits per second per Hertz (bps/Hz) and indicates how effectively a system uses the available spectrum.
84
參考答案
A wireless site survey – also known as a WiFi survey, or WLAN site survey – is a systematic process used to evaluate and optimize a wireless network's performance within a physical space. The primary objective is to understand how WiFi signals behave in the environment, identify coverage gaps, and detect sources of interference that may degrade network quality.
85
參考答案
- Plane Surveying: Assumes the Earth is flat and ignores the curvature. It is suitable for small areas where the Earth's curvature is negligible. - Advantages: Simpler calculations, less complex equipment, cost-effective. - Disadvantages: Limited accuracy for large areas, errors accumulate over long distances. - Geodetic Surveying: Considers the Earth's curvature and employs complex calculations to account for it. It is essential for large-scale projects and areas where accuracy is paramount. - Advantages: Highly accurate for large areas, suitable for control surveys and mapping. - Disadvantages: More complex calculations and equipment, higher costs.
86
參考答案
The Doppler effect is the change in frequency of a signal due to the relative motion between the transmitter and the receiver. It can cause frequency shifts in wireless communication, especially in mobile environments, affecting signal quality.
87
參考答案
Costs for a wifi site survey depend on a number of factors such as the size of premises, the type of environment/building and location. Depending on the type of survey you require (active, passive or predictive), on-site prices can start from £1500 and can sometimes go up to £5,000-6,000.
88
參考答案
Interference identification selects a device known to cause issues for your wireless network and moves it closer to the wireless APs within the facility until problems arise.
89
參考答案
OFDM is a digital modulation technique that splits a signal into multiple narrowband sub-carriers transmitted simultaneously at different frequencies. It helps mitigate the effects of multipath fading and enhances data throughput in wireless communication.
90
參考答案
Interviewers should look for practical experience with filter design. The candidate should discuss filter types (low-pass, high-pass, band-pass) and how they ensure good performance by controlling parameters like bandwidth and insertion loss. They should also describe how they've optimized filters in past projects, possibly to meet specific frequency range needs or improve signal clarity.
91
參考答案
ESS (Extended Service Set): Created by connecting multiple BSSs via a distribution system, allowing larger coverage and seamless client roaming.
92
參考答案
The candidate should provide an example of using RFID for asset tracking, inventory management, or network monitoring, detailing the implementation and benefits.
93
參考答案
SNR stands for Signal-to-Noise Ratio, which measures the strength of the wireless signal relative to background noise. To fix SNR issues, engineers can reduce interference, reposition antennas, adjust power levels, or use higher-gain antennas.
94
參考答案
A wireless site survey (also called a WLAN site survey) is the process of mapping RF coverage, interference, capacity needs, and roaming requirements before you deploy, upgrade, or troubleshoot a Wi-Fi network.
95
參考答案
Channel bonding combines two or more adjacent channels to increase the bandwidth available for wireless communication. This technique improves data transfer rates by utilizing additional spectrum, but it may also increase interference with other networks.
96
參考答案
The surveying industry is constantly evolving with advancements in technology and methodologies. Some emerging trends include: - 3D Laser Scanning: Capturing detailed 3D models of structures and terrain, enabling accurate measurements and visualizations. - Unmanned Aerial Vehicles (UAVs): Using drones for aerial surveys, providing efficient data collection and high-resolution imagery. - Cloud Computing: Utilizing cloud-based platforms for data storage, processing, and collaboration, enhancing accessibility and efficiency. - Artificial Intelligence (AI): Implementing AI algorithms for automating data analysis, identifying patterns, and improving accuracy. - BIM Integration: Integrating surveying data with Building Information Modeling (BIM) software for seamless design, construction, and maintenance processes.
97
參考答案
GPS offers several advantages: - High Accuracy: Modern GPS receivers can achieve centimeter-level accuracy. - Increased Efficiency: GPS reduces the time and effort required for traditional surveying methods. - Global Coverage: GPS works worldwide, eliminating the need for physical reference points in remote areas. - Cost-Effectiveness: GPS can be more cost-effective compared to traditional surveying techniques. - However, GPS also has some limitations: - Signal Interference: Signals can be blocked by tall buildings, dense foliage, or atmospheric conditions, leading to errors. - Multipath Effects: Reflections from surrounding objects can distort the GPS signal, affecting accuracy. - Atmospheric Delays: Variations in atmospheric conditions can affect signal travel time, introducing errors. - Requirement of Open Sky: GPS requires a clear view of the sky, making it challenging in heavily built-up areas or dense forests.
98
參考答案
Beamforming directs the wireless signal towards specific devices rather than broadcasting it in all directions. This focused signal improves signal strength, range, and data rates, resulting in better performance and reduced interference.
99
參考答案
Wireless site surveys come in various forms: Passive survey (scanning the wireless environment without connecting to any network to capture data on signal strength, channel usage, and interference sources); Active survey (connecting to the network to measure actual performance metrics including throughput, latency, and packet loss); Predictive survey (using building blueprints and simulation software to model WiFi coverage before any hardware is installed); Spectrum analysis (focusing on detecting non-WiFi interference like microwave ovens, cordless phones, or industrial machinery).
100
參考答案
There are only two tools needed: - A computing device (laptop, tablet, or smartphone) - WiFi site survey software (NetSpot is a good example)
101
參考答案
Capacity planning involves assessing current and future network demands, analyzing user density, and determining the number of access points needed. It includes evaluating bandwidth requirements, coverage areas, and potential growth to ensure the network can handle anticipated loads.
102
參考答案
Parameters Include: SSID, RF, Channel authentication method.
103
參考答案
Wi-Fi 7 addresses the growing demand for IoT devices by providing higher network capacity, lower latency, and improved power efficiency. The enhanced Target Wake Time (TWT) feature allows IoT devices to schedule communication with the network more efficiently, reducing power consumption and extending battery life. The increased spectrum and better management of multiple devices make Wi-Fi 7 ideal for large-scale IoT deployments.
104
參考答案
Ad-Hoc vs Infrastructure: Ad-Hoc is peer-to-peer, whereas Infrastructure relies on a central Access Point.
105
參考答案
Experience in RF engineering and optimization implies that the candidate is able to work with signal processing, system design, and implementation, which are crucial in wireless communication.
106
參考答案
The candidate should be familiar with homologation processes and be able to discuss practical examples of how they navigated different country requirements to achieve device certification.
107
參考答案
A wireless site survey can determine the expected coverage area of the WLAN.
108
參考答案
Active surveys focus on a specific signal or set of specific signals and produce an extensive list of measurements for each AP that generates a studied signal.
109
參考答案
To secure a guest wireless network: - - Use a separate VLAN for guest traffic to isolate it from the main network. - Implement WPA2 or WPA3 encryption. - Require guest users to authenticate via a captive portal. - Restrict access to internal resources and monitor guest network activity.
110
參考答案
Best practices include: Step 1: Scale your floor plan accurately to avoid compounding errors. Step 2: Use a dedicated measurement device like the Ekahau Sidekick 2 for consistent RF measurements. Step 3: Scan only the proper channels relevant to your environment. Step 4: Capture survey data accurately and consistently, avoiding unrealistic walking paths. Step 5: Measure signal on both sides of obstacles to determine accurate attenuation. Step 6: Choose the right survey method (Stop & Go, Continuous, Autopilot, or GPS) for your environment.
111
參考答案
- Password Recovery: Use the CLI and Restore-Password command for versions 5.1 and later; otherwise, reset to factory defaults.
112
參考答案
- Closed Traverse: Begins and ends at the same point, forming a closed loop. The measurements are adjusted to ensure the closure of the traverse. - Advantages: Provides internal checks on accuracy, suitable for boundary surveys. - Disadvantages: Requires more measurements, less efficient for large areas. - Open Traverse: Does not close and ends at a different point than where it started. The accuracy of the traverse relies on the accuracy of the starting point. - Advantages: More efficient for long distances, suitable for route surveys. - Disadvantages: Less accurate than closed traverses, relies on the accuracy of the starting point.
113
參考答案
The most common key points include meeting rooms, offices, executive areas, and production areas like loading docks.
114
參考答案
Airtime fairness ensures that all devices connected to a wireless network receive an equal opportunity to transmit data. It prevents a single device from monopolizing network resources and improves overall network performance and user experience.
115
參考答案
Master Controller Mode: Designates a controller as the tie-breaker when multiple controllers are available.
116
參考答案
After a professional WiFi survey, you should typically receive visual heatmaps, findings on coverage and interference, recommendations for access point placement and configuration, and a practical plan for improving or validating wireless performance.
117
參考答案
The candidate should have a strong grasp of lumped vs. distributed elements in RF circuit design and their frequency-dependent behavior. The explanation should cover when and why certain elements are preferred.
118
參考答案
A predictive survey relies on network tools designed to predict how wireless signals propagate through a space. The input is a detailed set of blueprints and information on the type of wireless equipment proposed, such as which Wi-Fi standard the area will use.
119
參考答案
The candidate should describe various thermal management techniques such as heat sinks, thermal vias, and material choice, and their role in ensuring the reliability and performance of high-power RF circuits.
120
參考答案
Wi-Fi 7 is designed to be backward compatible with previous Wi-Fi standards, including Wi-Fi 6, Wi-Fi 5, and earlier. This means that devices supporting older standards can still connect to a Wi-Fi 7 network, albeit without the enhanced features and performance benefits of Wi-Fi 7. The backward compatibility ensures a smooth transition for users as they upgrade their devices over time.
121
參考答案
Choosing to conduct your own wireless survey requires specific objectives. Here's how a wireless survey should be conducted in your environment: Understanding the objectives The first step Nile and its partners perform in conducting a wireless survey is to clearly define objectives. This involves understanding the specific needs of the customer and challenges the environment may present where the wireless network will be deployed. Whether it's providing coverage in a large office, supporting high-density environments, or ensuring connectivity in areas with physical obstructions, the goals of the survey should be well-defined. Planning the survey Careful planning of the survey is essential. This includes deciding on the areas to survey as some Nile customers are opting to only cover specific areas in the initial phase of a roll-out, scheduling the survey during typical usage hours to accurately gauge performance under normal conditions, and preparing any necessary documentation or schematics of the location. Conducting the physical survey The actual survey involves Nile's on-site personnel walking through the site with the chosen tools to collect data on signal strength, interference sources, and coverage gaps. This step might require multiple passes through the area to ensure all necessary data is captured accurately. Analyzing the data Once the data is collected, it's important to analyze it to understand the performance and limitations of the current wireless setup. A similar process is used for greenfield sites, but Nile's use of AI planning tools helps as there is no existing Wi-Fi to test and evaluate. Tools like site survey software can create heat maps to visualize coverage, while spectrum analyzers can help identify sources of interference. Creating a report and action plan The final step as previously described is to compile the findings into a comprehensive report.
122
參考答案
A successful surveying career requires a combination of technical skills, analytical abilities, and soft skills: - Technical Skills: Proficiency in using surveying instruments, software, and techniques, including GPS, total stations, and data processing. - Analytical Skills: Ability to interpret data, perform calculations, and analyze survey information accurately. - Problem-Solving Skills: Identifying and resolving surveying challenges in the field. - Spatial Reasoning: Strong understanding of spatial relationships and the ability to visualize and interpret survey data. - Communication Skills: Effective communication with clients, engineers, and other stakeholders. - Teamwork Skills: Collaborating effectively with other surveyors, engineers, and project teams. - Attention to Detail: Meticulous attention to detail for accurate measurements and data recording. - Physical Fitness: Ability to work outdoors in various weather conditions and terrain. - Educational Qualifications: Typically, a bachelor's degree in surveying, geomatics, or a related field is required. - Professional Licensure: Obtaining professional licensure, such as a Professional Land Surveyor (PLS), is essential in many jurisdictions.
123
參考答案
Expect the candidate to demonstrate experience in creating project plans, understanding of necessary project phases, risk management, resource allocation, and consideration of industry-specific constraints such as RF spectrum regulations and hardware procurement lead times.
124
參考答案
A wireless network ACL restricts or permits traffic based on predefined rules, enhancing security by controlling access to network resources. It can be used to block unauthorized devices or limit access to specific services or applications.
125
參考答案
Candidate should show knowledge of various project management methodologies (like Agile, Waterfall, Scrum) and provide examples of how they've tailored these methodologies to suit RF Engineering projects.
126
參考答案
Power over Ethernet (PoE) allows network cables to carry both data and electrical power to devices such as access points and IP cameras. It simplifies installation by reducing the need for separate power sources and outlets.
127
參考答案
Channel planning involves selecting and configuring wireless channels to minimize interference and optimize network performance. Proper planning ensures that adjacent access points use non-overlapping channels to avoid co-channel interference.
128
參考答案
Wireless communication refers to the transmission of data or voice signals without the use of physical connections (wires). It relies on electromagnetic waves (e.g., radio, microwave, infrared) to transfer information between devices.
129
參考答案
Wi-Fi: Wireless Fidelity, a technology that uses radio waves for high-speed network connectivity based on IEEE 802.11 standards. Devices include PCs, laptops, video game consoles, phones, tablets, smart TVs, and more. WiMAX: Worldwide Interoperability for Microwave Access, referenced by IEEE 802.16, commonly termed 4G. It provides wide area network access and uses OFDM modulation.
130
參考答案
Candidates should articulate the principles behind MIMO and beamforming and their benefits, such as increased data rates and improved signal quality.
131
參考答案
The candidate should demonstrate their ability to troubleshoot complex RF interference problems by identifying the source of the problem and implementing a solution. This shows their practical knowledge and problem-solving skills.
132
參考答案
A wireless network management system (WMS) provides centralized control and monitoring of wireless network components. It helps manage configuration, performance, security, and troubleshooting, offering insights and analytics to optimize network operations.
133
參考答案
Management, Control, Data frame and reserved
134
參考答案
Common wireless network topologies include: - - Infrastructure: Devices connect to a central access point or wireless controller. - Ad-Hoc: Devices communicate directly with each other without an access point. - Mesh: Devices form a network by connecting to multiple access points, creating a self-healing network.
135
參考答案
Wireless spectrum refers to the range of radio frequencies used for wireless communication. It is important because it determines the capacity, coverage, and performance of wireless networks. Proper management of spectrum helps avoid interference and optimize network performance.
136
參考答案
- Mechanisms Include: WEP, WPA, WPA2, EAP, MAC authentication.
137
參考答案
The candidate should outline their professional aspirations, such as advancing to senior roles, specializing in certain technologies, or contributing to innovative projects.
138
參考答案
A career in surveying offers diverse opportunities across various sectors: - Construction: Working on construction projects, providing site layout, leveling, and progress monitoring. - Engineering: Supporting engineering firms with design, analysis, and construction projects. - Land Development: Planning and surveying land for residential, commercial, or industrial developments. - Mapping: Creating maps for navigation, resource management, and other purposes. - Government: Working for government agencies involved in land management, infrastructure, and mapping. - Environmental Consulting: Supporting environmental studies, land conservation, and resource management. - Research and Academia: Contributing to research and teaching in surveying and geomatics.
139
參考答案
A wireless site survey provides a detailed overview of your wireless environment. It typically shows the following: AP locations The survey identifies the optimal positions for your Nile APs to ensure broad and reliable coverage. This is crucial for maintaining a strong Wi-Fi connection throughout the site. Signal strength A site survey can help identify the strength of Wi-Fi signals across different areas in a location, highlighting any ‘dead zones' where signal coverage is weak. This helps Nile understand where enhancements are needed. Sources of interference The survey can detect other wireless networks (internal or external to your site) or electronic devices that might be interfering with your Nile wireless network, causing decreased performance. Identifying these sources is key to mitigating connectivity and performance issues. Network coverage As part of Nile's planning service we map out the areas of your site where wireless connectivity is supposed to be made available. This is often visualized through a heat map, providing a clear representation of coverage areas. Capacity planning The Nile survey then provides insight into the network's capacity to handle a specific number of users/devices without compromising on speed and reliability. This is essential for efficient network planning. Network health metrics Some site surveys may also include data on key network performance metrics, such as latency, data rates, throughput, packet loss, and retransmission rates. These metrics offer a comprehensive view of network health across the site and as users connect and disconnect throughout the day. Security risks The survey can highlight potential security vulnerabilities within the network. For instance, it may identify unsecured APs from other vendors or rogue devices connected to the network, which are critical security concerns. Nile's APs offer tamper proof features such as TPM chips and the removal of console ports. There are also dedicated radios that help in identifying rogue APs post deployment. Physical obstructions The survey can illustrate how walls, floors, furniture, and other physical structures within the site are affecting the propagation of wireless signals. Nile understands that identifying these obstructions is vital for an effective network design and uses AI throughout the process to point out common obstructions. Recommendations Based on these findings, Nile's site survey includes recommendations for improving the performance and coverage of your wireless network. These suggestions are tailored to address specific issues identified during the survey for your specific location and each site may be different.
140
參考答案
LTE primarily operates up to 1 Gbps with higher latency, while 5G targets 10 Gbps with significantly lower latency, allowing for real-time applications. This shift necessitates a more flexible network architecture and increased density of cell sites.
141
參考答案
A validation survey is typically used for wireless infrastructure post-installation and is used to compare predictions to real performance. This can also be used for self-deployment scenarios when you need to gauge performance after installation.
142
參考答案
The answer to this question will help you understand the candidate's practical knowledge and ability to optimize wireless networks.
143
參考答案
A DHCP (Dynamic Host Configuration Protocol) server assigns IP addresses and other network configuration parameters to wireless devices automatically. It simplifies network management and ensures devices receive valid IP addresses for connectivity.
144
參考答案
CAPWAP vs LWAPP: CAPWAP supports both IPv4 and IPv6, provides better security, and uses DTLS, whereas LWAPP only supports IPv4 and is less secure.
145
參考答案
Wireless site surveys can be categorized into different types based on the methodology and purpose. The most predominant types of wireless site surveys are: Passive: These surveys involve measuring the signal strength and quality of existing wireless networks without actively connecting to them. They are useful for assessing current Wi-Fi infrastructure. Active: In contrast, active surveys require connecting to the network to measure its performance, including throughput, data rates, and response times. This type is more comprehensive and provides insights into the user experience on the network. Predictive: These are virtual surveys conducted using specialized software and AI to model and predict Wi-Fi coverage. They are often used in the early stages of network planning, especially in large or complex environments. Hybrid: Combining elements of both passive and active surveys, hybrid surveys offer a thorough assessment of the Wi-Fi network's performance and coverage.
146
參考答案
For enterprise environments, a comprehensive site survey should be conducted at least annually. Additionally, perform targeted surveys whenever you: • Experience persistent connectivity issues • Make significant changes to your physical environment • Add a substantial number of new wireless devices • Upgrade to a new wireless standard • Expand your facility or repurpose spaces
147
參考答案
I have experience working on large-scale projects, including experience coordinating with other team members and working with project managers and other stakeholders. I am able to understand and work within project timelines and budgets, and I am able to adapt to changing project requirements. I am also able to prioritize tasks and manage multiple projects simultaneously.
148
參考答案
An antenna is used to convert electrical signals into electromagnetic waves for transmission and vice versa for reception. The design, type, and orientation of an antenna significantly affect the performance of a wireless communication system.
149
參考答案
An 802.1X authentication server (often a RADIUS server) provides centralized authentication for wireless clients. It verifies user credentials and grants access based on policies, enhancing network security and access control.
150
參考答案
Roaming allows a wireless device to move between different access points within the same network without losing connectivity. The wireless controller or access points manage the handoff process to ensure seamless connection and maintain network performance.
151
參考答案
A candidate's approach towards problem-solving is essential to understanding their thought process and working style. The answer could be a reflection of their expertise in troubleshooting network communication issues and system glitches.
152
參考答案
STP (Spanning Tree Protocol): Enabled to prevent network loops.
153
參考答案
I ensure accuracy in my survey work by following established protocols and procedures, and by using the most appropriate equipment and technology for the task at hand. I also verify and cross-check my work, and I am able to identify and correct errors. I also use quality control procedures to ensure that all the data and results are accurate.
154
參考答案
Requirements prior to starting a site survey include: - Understand the application requirements (Voice, data, location services etc) - Understand the client device types (Vendor model, make, wifi capability) - Determine if redundancy is required for access points - Understand the capacity requirements for that area - Design for the lowest capable client - Define coverage requirements (Minimum signal strength, SNR, coverage overlap, channel planning) - Understand what is currently on the wifi network by performing passive scan - Arrange site survey kit, site access, and manage logistics - Have the right gear (AP, laptop, licensed site survey software, wi-fi adapters, battery pack, tripods, laser distance meter, angle meter, fabricated antenna brackets, spare survey device/battery, duct tapes, cable ties, nuts and bolts)
155
參考答案
Stronger Encryption: WPA provides better security and dynamic key changes, unlike WEP which uses static keys.
156
參考答案
The candidate should list their key strengths relevant to wireless network engineering, such as technical skills, problem-solving abilities, or teamwork.
157
參考答案
I would first analyze the new regulations to understand how they affect the project's compliance. Then, I would assess our current timeline and identify adjustments we need to make. I would ensure that all stakeholders are informed about these changes and collaborate with the team to create an updated project plan that aligns with the new regulations.
158
參考答案
Most networking professionals identify the following three main types of site surveys: - Predictive site surveys: estimates how a WiFi network would perform in a certain environment using complex mathematical models. - Passive site surveys: involves observing existing wireless signals in the surveyed area to find out how many wireless routers are transmitting them, how they are configured, and how strong the signals are. - Active site surveys: involves active bi-directional communication with the tested network, used to reveal performance fluctuations and other hard-to-detect issues.
159
參考答案
The fundamental principles of surveying are: - Measurement of Angles and Distances: Accurate measurement of angles and distances using appropriate instruments is crucial for precise surveying. - Horizontal and Vertical Control: Establishing reference points with known coordinates to control the survey and ensure accuracy. - Least Squares Adjustment: Applying mathematical techniques to minimize errors and achieve the most accurate solution for surveyed data. - Coordinate Systems: Using established coordinate systems (like UTM or State Plane) to define the location of surveyed points.
160
參考答案
In infrastructure mode, devices connect through an access point or wireless router, which manages the network. In ad-hoc mode, devices connect directly to each other without an access point, suitable for small, temporary networks.
161
參考答案
FlexConnect: Enables branch office APs to be managed from a central location, allowing local client data switching and authentication. FlexConnect (previously known as Hybrid Remote Edge Access Point or H-REAP) is a wireless solution for branch office and remote office deployments. It enables you to configure and control access points in a branch or remote office from the corporate office through a wide area network (WAN) link without the deployment of a controller in each office. The FlexConnect access points (APs) can switch client data traffic locally and perform client authentication locally. When they are connected to the controller, they can also send traffic back to the controller.
162
參考答案
- Supports Up to 1500 Access Points.
163
參考答案
QoS prioritizes network traffic to ensure that critical applications (e.g., VoIP, video streaming) receive sufficient bandwidth and low latency. It helps maintain optimal performance and user experience by managing and optimizing network resources.
164
參考答案
I stay current with the latest survey technologies by regularly reading industry publications, attending conferences and workshops, and participating in professional development opportunities. I am also a member of professional organizations such as the National Society of Professional Surveyors, which provides me with access to the latest developments and best practices in the field.
165
參考答案
Pros: AI-driven design and live network analysis; supports multiple wireless technologies beyond Wi-Fi; competitive pricing with a modern, responsive interface; effective for ongoing network monitoring and optimisation. Cons: Less established compared to Air Magnet and Ekahau; may lack some advanced features found in more mature tools; smaller user community and fewer third-party integrations.
166
參考答案
I would set up a dedicated communication platform for the team and schedule regular check-ins to discuss our progress and any issues that arise. This ensures everyone stays aligned and can contribute effectively.
167
參考答案
AP mode (Access Point mode) allows a wireless device to function as an access point, providing wireless connectivity to clients and extending the network. It is commonly used to bridge wired networks with wireless clients.
168
參考答案
Always plan for overlap between wireless access points to ensure smooth streaming. Make sure that wireless access points don't use a transmit power greater than what client devices can handle. Map out the environment's “noise floor.” Carefully map out the most critical areas for wireless signal. Accurately identify all potential sources of interference. Create clear, legible plans that can be easily followed during installation. Analyze the data to pinpoint any areas where the network is faltering; filtering results by turning off certain channels will help with interference.
169
參考答案
The familiarity with these technologies shows their exposure to advance wireless communication systems and their evolution.
170
參考答案
4G LTE (Long-Term Evolution) provides high-speed data transmission with a focus on mobile broadband. 5G (Fifth Generation) offers significantly faster data rates, lower latency, higher capacity, and supports more connected devices (IoT). It also uses higher-frequency millimeter waves for improved performance.
171
參考答案
Licensed spectrum is allocated by government authorities (like the FCC) and requires carriers to obtain licenses for operation. It's primarily used for services like cellular communication. Unlicensed spectrum is available for public use without licenses and is used for Wi-Fi, Bluetooth, and other short-range communication systems.
172
參考答案
- FlexConnect: Enables branch office APs to be managed from a central location, allowing local client data switching and authentication. FlexConnect (previously known as Hybrid Remote Edge Access Point or H-REAP) is a wireless solution for branch office and remote office deployments. It enables you to configure and control access points in a branch or remote office from the corporate office through a wide area network (WAN) link without the deployment of a controller in each office. The FlexConnect access points (APs) can switch client data traffic locally and perform client authentication locally. When they are connected to the controller, they can also send traffic back to the controller.
173
參考答案
- Parameters Include: SSID, RF, Channel authentication method.
174
參考答案
The goal is to understand and validate wireless issues and develop an actionable plan. Benefits include: gaining insight into the existing performance, identifying the best locations and types of access points for deployment, identifying trouble areas, and drafting solutions and next steps for remediation.
175
參考答案
Wi-Fi vs Bluetooth: Wi-Fi is for high-speed internet access; Bluetooth is for short-range communication between devices.
176
參考答案
Several techniques help reduce errors in surveying: - Calibration of Instruments: Regularly calibrating instruments ensures their accuracy. - Double Observations: Taking measurements multiple times and averaging the results reduces the impact of random errors. - Use of Check Measurements: Performing independent checks to verify the accuracy of previous measurements. - Proper Procedures and Techniques: Following established surveying procedures and using appropriate techniques helps minimize human errors. - Least Squares Adjustment: Applying mathematical methods to distribute errors evenly and obtain the most accurate solution.
177
參考答案
Wireless site surveys are typically performed by IT professionals specializing in wireless network design or engineers who have expertise in wireless technology. This can either be a member of the company's in-house IT staff or an external consultant or service provider. These individuals need to have a thorough understanding of wireless networks, APs, signal strength, frequency, and other related aspects. They should also be skilled in using various wireless site survey tools and be aware of the latest industry standards and best practices.
178
參考答案
The common phases when a site survey will be performed are: - Before the building is constructed (Predictive) - Pre deployment (AP on a stick using active/passive) - Post deployment (Validation using passive survey)
179
參考答案
If the building/floor is not constructed, you can opt for predictive site survey and perform a post deployment passive site survey once the building and installation is complete. If the area to be surveyed is constructed and challenging in nature like manufacturing floor, stadium, warehouse, outdoor, harbour, or high density areas, then AP on a stick survey is recommended, where both active and passive site surveys can be performed.
180
參考答案
A site survey includes a detailed analysis of signal strength, interference, channel and band settings, and other parameters. Such surveys are typically performed to determine the optimal location for a WiFi router or to troubleshoot WiFi-related issues.
181
參考答案
HSPA (High-Speed Packet Access): An evolution of 3G technologies, offering faster data rates compared to basic 3G. HSPA+: An enhanced version of HSPA that offers higher data rates, lower latency, and improved spectral efficiency, often referred to as "3.5G."
182
參考答案
Supports Up to 1500 Access Points.
183
參考答案
The candidate should ask thoughtful questions about the role, team, company culture, or technical challenges to demonstrate engagement and interest.
184
參考答案
“In the event of a wireless network outage at a major client's site, I would first assess the scope of the outage by checking monitoring tools and logs. I would prioritize critical areas and start with basic checks, such as verifying power and connections. Throughout the process, I would keep the client updated on our progress. After resolving the issue, I would document the incident and conduct a post-mortem analysis with recommendations to prevent future occurrences.”
185
參考答案
- EAP (Extensible Authentication Protocol): Used in wireless communications for user authentication through an Access Point and an authentication server.
186
參考答案
A theodolite is a primary instrument for measuring horizontal and vertical angles with high precision. It typically relies on manual distance measurements. A total station, on the other hand, combines a theodolite with an electronic distance meter (EDM), allowing for automatic distance measurement. This integration makes total stations more efficient and versatile for modern surveying tasks.
187
參考答案
A wireless site survey can answer whether multiple access points are needed and, if so, how many will be required.
188
參考答案
You can google it :)
189
參考答案
I would focus on covering high-traffic areas first and select mid-range equipment that balances cost and performance. Leveraging existing cabling and hardware can also cut initial costs.
190
參考答案
Site survey heatmaps provide a visual representation of the building or location you are surveying. They show areas of both good and bad coverage and test access points and is easier to understand visually. Heat maps show current capacity, bandwidth, number of access points, interference, signal strength and lots more information.
191
參考答案
A passive site survey is conducted in listen-only mode and does not associate the survey client to the access point. This does not affect your production at all.
192
參考答案
I mentored a junior engineer who wanted to improve their RF design skills. We set weekly meetings to discuss key concepts, worked through real-world projects, and I guided them in troubleshooting. The biggest challenge was helping them understand signal degradation, which we tackled through hands-on experiments. This experience taught me the importance of patience and adapting my teaching style to fit their needs.
193
參考答案
Physically walking the site provides insight into things that you cannot gain remotely such as identifying equipment racks, modular walls, varying heights of inventory, etc.
194
參考答案
Accurate and complete field notes are essential for surveying because they provide a permanent record of the measurements and observations made in the field. They serve as the primary source of information for subsequent calculations, data analysis, and map creation. Good field notes ensure: - Accuracy: Minimizing errors by recording all measurements and observations accurately. - Clarity: Ensuring the data is clear and understandable, even for someone unfamiliar with the survey. - Completeness: Including all necessary information, such as instrument details, weather conditions, and any relevant observations. - Verification: Enabling verification and re-checking of measurements and calculations. - Legal Evidence: Serving as legal evidence in cases involving property boundaries or other legal disputes.
195
參考答案
This question should assess the candidate's understanding of noise figure and its impact on signal clarity. The candidate should explain how a higher noise figure reduces the overall quality of the signal. Look for their familiarity with techniques to minimize noise, like using low-noise amplifiers and fine-tuning circuit components to reduce noise.
196
參考答案
The candidate should confirm experience with MIMO (Multiple Input Multiple Output) technology, including configuration, optimization, and benefits like increased throughput.
197
參考答案
WEP encryption can be cracked using tools like Airsnort and Aircrack by capturing enough packets with the right settings. These tools exploit weaknesses in the WEP algorithm, such as the use of static keys and initialization vector reuse, to recover the encryption key through statistical analysis.
198
參考答案
- Stronger Encryption: WPA provides better security and dynamic key changes, unlike WEP which uses static keys.
199
參考答案
There is no real ‘correct' answer for such open ended questions. The interviewer is trying to access your analytical thinking and troubleshooting skills. If the interview is for a customer rep or test engineer, this question would be very important. Throughput issues can steam from variety of root causes. It is important to ask a few questions and understand what is the problem symptom before you get started. You should look at the data rate at which the client is connecting (802.11n, ac etc), what MCS rate and the clients capability, SNR, RSSI of the client to start off with. A handy tool is WLC / AP debugs logs in conjunction with Over-the-air 802.11 sniffer captures. You can follow the traffic pattern (you won't be able to decode the actual qos data on most occasions) to try and get a sense of any RF issues (if you see too many Retries or rate downshift). On odd occasion if there is a bug you may land up with incorrect sequencing of the data frames, qos mis configs and potential A-MPDU issues. Next step once you are past the Layer 1 and 2 of the OSI model is to start exploring the layer 3 traffic (decapsulated, preferably at the VLAN level or default gateway). Check for TCP windowing issues or retransmit etc. The problem could be between specific hosts/ servers etc.
200
參考答案
Common mistakes include: unrealistic walking paths (skipping areas or cutting across walls), unmarked pauses in continuous surveys (skewing data point recording), incorrect floor plan scaling (compounding errors that distort heatmaps), one-sided measurements (missing signal absorption by obstacles), and choosing the wrong survey method for the environment (e.g., using continuous mode in a hazardous space).


Copyright © 2024. Designer by SPOTO Official Website. All Rights Reserved.