Contention resolution ensures only one UE succeeds when multiple use the same preamble.
2
參考答案
Inter-frequency measurements use measurement gaps to monitor other frequencies.
職涯加速
考取認證，讓履歷脫穎而出。
數據分析顯示，持有 IT 認證的從業者年薪平均比求職者高出 26%。在 SPOTO，您可以同時備考認證與準備面試，加速職涯成長。
1100% 通過率
22 週題庫練習
3通過認證考試
3
參考答案
A paging message alerts a UE in idle mode about incoming data or calls.
4
參考答案
I have extensive experience with OSPF, EIGRP, and BGP, having implemented and optimized these protocols in various enterprise environments. For instance, I successfully configured BGP for a multi-homed network to ensure redundancy and load balancing.
5
參考答案
A point to point link is a connection between two dedicated networking devices.
The complete bandwidth of the link is utilized for the transmission of data between two devices.
There may be multiple connections between devices. Using a PPP link, two different networks can be connected, where one network will work as the endpoint for another.
These days PPP links are created using modems and PSTN (Public Switched Telephone Networks).
An example of a PPP link is a telephone call between two people.
6
參考答案
CQI reports downlink channel quality to the eNodeB for adaptive modulation and coding.
7
參考答案
Security in LTE is based on
8
參考答案
I approach network capacity planning by analyzing current network usage and performance metrics, projecting future growth, and identifying potential bottlenecks. This involves monitoring traffic patterns, evaluating bandwidth requirements, and assessing the scalability of existing infrastructure. Based on the analysis, I develop a plan that includes upgrading hardware, optimizing configurations, and implementing additional resources to ensure the network can handle future demands.
9
參考答案
The air interface in 5G introduces advanced QoS management mechanisms, including dynamic QoS allocation, traffic prioritization, and policy-based resource allocation, to ensure optimal service performance and user experience.
10
參考答案
DCI formats include Format 0 (uplink grant), Format 1/1A/1B/1C/1D (downlink assignments), Format 2/2A/2B/2C (MIMO), Format 3/3A (power control), and Format 4 (uplink MIMO).
11
參考答案
This question assesses the candidate's proficiency with tools like Ekahau, AirMagnet, Wireshark, or Cisco Prime for monitoring and analyzing wireless networks.
12
參考答案
A default gateway routes traffic from a local network to external networks like the internet.
13
參考答案
PSS and SSS help the UE identify the cell and achieve time/frequency synchronization.
14
參考答案
A UE initiates RACH for initial access, handover, or when uplink synchronization is lost.
15
參考答案
Transmission power control adjusts UE or eNodeB power to maintain signal quality and reduce interference.
16
參考答案
A candidate's strategy for ensuring the quality and performance of a 5G system will test their commitment to delivering excellence and their overall understanding of setting and measuring performance metrics.
17
參考答案
Here is our example response: "I always strive to adapt my communication style to match the knowledge level of the person I'm speaking with, whether it's a colleague or a client. I do my best to employ simple terms and easy-to-understand language when conversing with individuals outside the networking domain. I often use analogies when translating complicated topics to people, as I find this approach makes things simpler for others to grasp intricate ideas."
18
參考答案
QoS in 5G ensures that different applications and services receive the required level of performance, such as latency, throughput, and reliability, based on their specific requirements.
19
參考答案
The DRX inactivity timer starts after a data transmission, keeping the UE awake until expiry.
20
參考答案
Network slicing is a key feature of 5G architecture that allows network operators to divide the network into virtualized slices, each with its own unique characteristics and capabilities. This allows operators to tailor the network to specific use cases and applications.
21
參考答案
5G NR logical channels include BCCH, PCCH, CCCH, DCCH, DTCH, and MCCH.
22
參考答案
A VPN is a Virtual Private Network. It creates a secure path over the internet, like a tunnel, to connect to a remote server.
23
參考答案
RNTI is used for UE identification in 5G NR. Types include C-RNTI (cell-level), RA-RNTI (random access), TC-RNTI (temporary), P-RNTI (paging), SI-RNTI (system info), MCS-C-RNTI (MCS), CS-RNTI (configured scheduling), and INT-RNTI (interruption).
24
參考答案
Analyzing network traffic patterns requires using tools like Wireshark, NetFlow analyzers, or network management software. With the help of software, network engineers: Collect and examine data on traffic volume, flow, sources, and destinations; Look for trends, spikes, or irregularities in the data; Use this analysis to identify potential issues and optimize performance.
25
參考答案
This layer ensures reliable data transfer between devices on the same network segment. It organizes data into frames and checks for errors using techniques like MAC addressing.
26
參考答案
This question evaluates the candidate's honesty and proactive approach to personal and professional development.
27
參考答案
This question tests the candidate's ability to handle high-pressure situations independently, showcasing their problem-solving skills and resourcefulness. You'll also understand more about their practical knowledge and experience in diagnosing and resolving critical network issues.
Answer sample:
In the event of a major outage where routers within the network are unreachable and the escalation engineer is not available, the immediate response is critical to minimizing impact and restoring service.
The initial step involves attempting to diagnose the scope and scale of the problem using available monitoring tools and systems. This includes checking network management systems (NMS) for alerts or indicators of what might have caused the outage, such as power failures, network congestion, or security incidents.
Without access to the escalation engineer, the next step would involve following the established incident management protocol. This typically includes informing the relevant stakeholders about the incident, including management and affected departments, to ensure transparency and initiate contingency plans if necessary.
Concurrently, I would attempt to isolate the issue by checking any recent changes to the network configuration or updates that might have triggered the outage.
Leveraging the collective knowledge and resources of the team is crucial, so I would reach out to other team members or departments that might offer insights or have experienced similar issues.
In parallel, accessing backup communication channels or secondary control systems that might not be affected by the outage could provide an alternative way to diagnose or even resolve the issue. Documentation plays a crucial role in such situations.
I would document all actions taken and findings, as this information can be critical for post-mortem analysis and preventing similar issues in the future.
If the primary methods of resolution are exhausted without success, activating disaster recovery plans, such as switching to backup systems or rerouting traffic through alternate pathways, becomes necessary to maintain business operations.
28
參考答案
Random access preambles initiate the random access procedure.
29
參考答案
MCS determines the data rate and robustness of HARQ transmissions.
30
參考答案
Our team faced a critical network outage affecting multiple departments. I coordinated with colleagues to systematically isolate the issue, ultimately identifying a misconfigured router. Together, we resolved the problem within hours, restoring full network functionality.
31
參考答案
The MME sends a paging message to eNodeBs in the tracking area.
32
參考答案
Continuity is maintained via data forwarding and bearer transfer between eNodeBs.
33
參考答案
LTE technology supports packet based services only, however 3GPP does specifies fallback for circuit switched services as well. To achieve this LTE architecture and network nodes require additional functionality, this blog is an attempt to provide overview for same.
In LTE architecture, the circuit switched (CS) fallback in EPS enables the provisioning of voice and traditional CS-domain services (e.g. CS UDI video/ SMS/ LCS/ USSD). To provide these services LTE reuses CS infrastructure when the UE is served by E UTRAN.
34
參考答案
5G incorporates secure network slicing techniques, including isolation mechanisms, encryption, and access control, to ensure the security and privacy of each network slice and prevent unauthorized access or data leakage.
35
參考答案
5G network deployment involves meticulous planning, site preparation, equipment installation, and optimisation. The process encompasses radio access network deployment, core network integration, and thorough testing to ensure seamless connectivity and optimal performance.
36
參考答案
Inter-frequency measurements evaluate signal quality on different carrier frequencies.
37
參考答案
Contention resolution resolves collisions when multiple UEs use the same preamble.
38
參考答案
IPv4 uses 32-bit addressing and supports around 4.3 billion addresses. IPv6 uses 128-bit addressing, providing an almost unlimited number of IP addresses and improving network scalability and efficiency. IPv4 uses decimal notation, while IPv6 uses hexadecimal notation. IPv4 uses broadcast traffic; IPv6 replaces it with multicast and anycast for efficiency. IPv6 has a simplified header structure, enabling more efficient routing. IPv6 supports auto-configuration (SLAAC), reducing the need for DHCP. IPv6 has built-in support for IPsec, improving native network security.
39
參考答案
Handover call flow: Source gNB sends measurement control -> UE reports -> Source gNB decides handover -> Sends Handover Request to target gNB -> Target gNB admits -> Source gNB sends RRC Reconfiguration to UE -> UE synchronizes to target -> UE sends RRC Reconfiguration Complete -> Target gNB sends Path Switch Request to AMF/UPF -> UPF switches path -> Source gNB releases resources. SN status transfer involves transferring PDCP sequence numbers for data continuity.
40
參考答案
Here you can list any qualifications or certifications youâve gained on your network engineering journey, whether through university degrees, network engineering courses or an apprenticeship course youâve completed. Although you may put all this down on your CV, this network engineer question allows you to expand on the qualifications youâve achieved, why you enrolled on these courses, and what you learned.
41
參考答案
Deploying a 5G system necessitates knowledge and hands-on experience. The candidate's response will provide the hiring manager with an understanding of their deployment skills in a real-world scenario.
42
參考答案
5G uses advanced technologies such as millimeter waves, massive MIMO, beamforming, and small cell networks.
43
參考答案
The MME (Mobility Management Entity) handles signaling for mobility, session management, authentication, and tracking area updates in the LTE core network.
44
參考答案
The MIB includes downlink bandwidth, PHICH configuration, and SFN bits.
45
參考答案
UL (Uplink) is transmission from UE to eNodeB, while DL (Downlink) is transmission from eNodeB to UE.
46
參考答案
5G NR (New Radio) is the new air interface developed by 3GPP for the 5G network. It uses a much wider spectrum than 4G, allowing higher throughput and more reliable connections. It also incorporates advanced technologies such as Massive MIMO, beamforming, and Full Duplex.
47
參考答案
Link
48
參考答案
Troubleshooting can be an important part of your daily workload as a network engineer when finding and diagnosing equipment that might not work properly. You may have to track down hardware issues, software bugs, and even security problems quickly and professionally. So, it's important that you can explain your process for identifying issues and resolving them efficiently and accurately.
49
參考答案
NAS Idle state means the UE is registered but not actively connected, monitoring paging.
50
參考答案
The paging occasion is the specific subframe where the UE wakes up for paging.
51
參考答案
A single segment of UTP cable has an effective length of 90 to 100 meters. This limit can be overcome by using repeaters and switches.
52
參考答案
5G NR (New Radio) has been developed to operate in two distinct bands; radioWave sub-6 GHz, and mmWave 24GHz to 52GHz. Despite actually running into the 7 GHz band, FR1 continues to be commonly referred to as the "Sub-6 GHz" band.
FR1: 410 to 7125 MHz
FR2: 24250 to 52600 MHz
Each band may operate in either FDD or TDD duplex mode.
Reference:
(3GPP 38.104-5.2.1 FR1), (3GPP 38.104-5.2.2 FR2)
53
參考答案
DCI includes the MCS field, which specifies the modulation order and coding rate for data transmission, adapting to channel conditions.
54
參考答案
A stateful firewall monitors the state of active connections and makes decisions based on the context of traffic. This ensures a more dynamic and intelligent filtering process. A stateless firewall, on the other hand, filters packets based solely on predefined rules, without considering the state of the connection. It is faster but less sophisticated.
55
參考答案
Transmission Mode 4 is closed-loop spatial multiplexing, using UE feedback for precoding.
56
參考答案
Here's an appropriate response: "Network topology refers to the organisation of components within a communication network. This structural representation illustrates nodes, devices, and network connections, which can be physically or logically arranged to demonstrate their interrelationships. For example, in a mesh topology, every device within the network is directly interconnected with each other device, creating a comprehensive and redundant network structure. As a result, every device in the mesh topology must possess a minimum of two network connections to facilitate seamless communication and ensure reliable data transmission. Engineers can design and optimise networks by understanding topology to efficiently meet their intended purposes."
Key aspects of 5G deployment include network controlled and UE controlled handovers, use of MIB (Master Information Block) and SIB (System Information Block) blocks, and non-standalone and standalone deployment modes.
59
參考答案
This question evaluates the candidate's awareness of typical configuration errors, such as improper channel planning, security misconfigurations, or poor placement of access points.
60
參考答案
I handle network compliance audits and assessments by preparing comprehensive documentation, conducting internal reviews, and ensuring all security controls and policies are in place. During the audit, I work closely with auditors to provide necessary information and address any findings promptly. Continuous monitoring and regular internal assessments help maintain compliance and readiness for external audits.
61
參考答案
Guard time accommodates propagation delay, with larger cells requiring longer guard time.
62
參考答案
A backbone network serves as the core framework within a computer network, linking together various networks. It facilitates the flow of information across different Local Area Networks (LANs) or subnetworks, ensuring seamless communication between them.
A backbone manages the bandwidth and multiple channels. It also can tie together diverse networks in the same building, different buildings, and even in wide areas. Normally, the backbone's capacity is greater than the networks connected to it.
63
參考答案
The downlink assignment index indicates the number of PDCCH assignments for HARQ-ACK bundling.
64
參考答案
Handover involves measurement reporting, handover decision, preparation, execution, and completion.
65
參考答案
An uplink grant is a DCI message that assigns PUSCH resources to a UE.
66
參考答案
Extended PHR includes power headroom for multiple carriers in CA.
67
參考答案
Contention-free RACH uses dedicated preambles for fast and reliable handover access.
68
參考答案
âA router is a hardware component responsible for facilitating communication between various networks and devices. The key functions of a router encompass managing interactions between distinct networks, determining the optimal paths for device communication, as well as forwarding and filtering packets to ensure efficient data transmission.â
69
參考答案
EN-DC (E-UTRA-NR Dual Connectivity) is a technology used in 5G networks that allows for simultaneous connections to both 4G and 5G networks.
70
參考答案
This question will give an insight into the candidate's familiarity with cloud technologies and their experience integrating them with the 5G network.
71
參考答案
The E-UTRAN (Evolved UTRAN) consists of eNBs, providing the E-UTRA user plane (PDCP/RLC/MAC/PHY) and control plane (RRC) protocol terminations towards the UE. The eNBs are interconnected with each other by means of the X2 interface. The eNBs are also connected by means of the S1 interface to the EPC (Evolved Packet Core), more specifically to the MME (Mobility Management Entity) by means of the S1-MME and to the Serving Gateway (S-GW) by means of the S1-U.
72
參考答案
PRACH uses 6 resource blocks in the frequency domain, mapped to the configured offset.
73
參考答案
The preamble itself carries no data; it identifies the UE via dedicated assignment.
74
參考答案
A PDSCH resource assignment allocates specific RBs and MCS for downlink data.
75
參考答案
The control plane comprises control functions and protocols responsible for signaling, session management, mobility management, and connection establishment between the UE and the network.
76
參考答案
MIB error checking uses CRC to ensure correct decoding.
77
參考答案
Detach terminates the UE's network connection, releasing resources and bearers.
78
參考答案
LAN stands for Local Area Network and it refers to the connection that exists between computers and other network devices located in a small physical location.
WAN, on the other hand, stands for Wide Area Network and refers to a telecommunications network (or computer network) that extends over a large geographical distance.
79
參考答案
MAC schedules data transmission by allocating resources and managing HARQ.
80
參考答案
Experience in project management, especially for 5G projects, can be a valuable metric to determine the candidate's leadership skills and ability to manage resources effectively.
81
參考答案
I take a multi-layered approach to network security, including:
- Implementing firewalls and intrusion detection/prevention systems
- Segmenting networks using VLANs and access control lists
- Encrypting sensitive data in transit and at rest
- Regularly updating and patching systems
- Conducting security audits and vulnerability assessments
- Implementing strong authentication mechanisms
- Educating users about security best practices
82
參考答案
Ultra-Reliable Low Latency Communications (uRLLC) is a critical aspect of 5G NR, catering to applications with stringent requirements. uRLLC ensures ultra-reliable and low-latency communication, making it indispensable for applications demanding instantaneous response times, such as industrial automation, remote surgery, and mission-critical services. Its high reliability sets the stage for revolutionary advancements in various industries.
83
參考答案
5G KPIs (Key Performance Indicators) are categorized according to the use cases: eMBB, URLLC, and mMTC.
Common KPIs include:
- Peak data rate
- Peak spectral efficiency
- Latency
- Traffic capacity
- Connection density
- Energy efficiency
- Reliability
84
參考答案
The answer to this question will allow you to gain insight into the candidate's ability to develop a comprehensive migration plan that aligns with organizational objectives and manage technical complexities related to network architecture, security, and performance optimization.
Answer sample:
To migrate data center resources to the cloud while ensuring business continuity, I would adopt a systematic approach focused on thorough planning, risk mitigation, and effective execution.
Firstly, I would conduct a comprehensive assessment of the current infrastructure, identifying workloads suitable for migration based on factors such as data sensitivity and performance requirements.
Next, I would develop a detailed migration plan, outlining specific steps, timelines, and resource allocation while also considering potential risks and mitigation strategies.
Throughout the migration process, I would prioritize minimizing disruption to operations by implementing phased migrations, conducting thorough testing, and establishing rollback procedures as needed.
Post-migration, I would monitor the performance of cloud-based resources closely, optimize configurations, and regularly review disaster recovery and business continuity plans to maintain resilience.
85
參考答案
SON (Self-Organizing Networks) includes ANR (Automatic Neighbor Relation) for automatic neighbor list management and MRO (Mobility Robustness Optimization) for optimizing handover parameters to reduce ping-pong, RLF, and handover failures.
86
參考答案
PCFICH indicates the control region size, enabling PDCCH decoding.
87
參考答案
Technologies used in 5G include millimeter waves and massive MIMO.
88
參考答案
PDCCH carries DCI to schedule uplink and downlink data transmissions for UEs.
89
參考答案
Ensuring isolation between network slices is crucial for preventing interference and maintaining service quality. Network slicing achieves isolation through dedicated resources and logical separation. Each slice operates independently, with its own set of resources, ensuring that changes or issues in one slice do not impact the performance or security of others.
90
參考答案
I handle network capacity planning by analyzing current usage patterns and forecasting future demands to ensure scalability. For performance optimization, I regularly monitor key metrics and implement adjustments to maintain optimal network efficiency.
91
參考答案
PHICH Ng (duration) is configured via MIB as normal or extended.
92
參考答案
SRS is used for uplink channel quality estimation, enabling frequency-domain scheduling and timing alignment.
93
參考答案
Error detection uses CRC, with NACK triggering retransmission.
94
參考答案
A router is a layer three network device that is used to establish communication among different networks. It has four main roles that are: Inter-network communication, best path selection, packet forwarding, and packet filtering.
Regarding the best path selection, there are three primary parameters:
- Longest prefix match
- Minimum AD (administrative distance)
- Lowest metric value
95
參考答案
The eNodeB does not send contention resolution, and the UE retries RACH.
96
參考答案
STP (Spanning Tree Protocol) is a network protocol used to prevent loops in Ethernet networks with redundant links. It works by creating a spanning tree topology that disables redundant paths and ensures a loop-free network. STP dynamically detects and blocks redundant links while maintaining backup paths in case of link failures. This improves network reliability and prevents broadcast storms.
97
參考答案
HARQ combines FEC and retransmissions to correct errors, improving reliability.
98
參考答案
Many employers will want you to have either some experience or awareness of all aspects of network engineering. So, when answering this question, mention all the areas of network engineering you have knowledge and experience in and your preferred area you specialise in. Hereâs how you could respond: âWhile I find every aspect of being a network engineer enjoyable, there is one particular area where my passion and expertise truly shine when I interact with clients and support with troubleshooting their server issues. I love the challenge of dealing with server and configuration problems and coming up with solutions that allow the client to get the most out of the network theyâre using.â
99
參考答案
The cyclic prefix mitigates ISI and ICI by providing a guard interval between symbols.
100
參考答案
Multicast is a communication method where data is transmitted from one source to multiple destinations simultaneously. It is used in networking to efficiently deliver data, such as video streams or real-time updates, to multiple recipients without duplicating the data for each recipient. Multicast reduces network bandwidth usage and improves performance for applications that require simultaneous data delivery to multiple users.
101
參考答案
PRACH spacing (1.25 kHz) is smaller than UL data spacing (15 kHz).
102
參考答案
The following are LTE Interfaces : (Ref: TS 23.401 v 841)
- S1-MME :- Reference point for the control plane protocol between E-UTRAN and MME.
- S1-U:- Reference point between E-UTRAN and Serving GW for the per bearer user plane tunnelling and inter eNodeB path switching during handover.
- S3:- It enables user and bearer information exchange for inter 3GPP access network mobility in idle and/or active state.
- S4:- It provides related control and mobility support between GPRS Core and the 3GPP Anchor function of Serving GW. In addition, if Direct Tunnel is not established, it provides the user plane tunnelling.
- S5:- It provides user plane tunnelling and tunnel management between Serving GW and PDN GW. It is used for Serving GW relocation due to UE mobility and if the Serving GW needs to connect to a non-collocated PDN GW for the required PDN connectivity.
- S6a:- It enables transfer of subscription and authentication data for authenticating/authorizing user access to the evolved system (AAA interface) between MME and HSS.
- Gx:- It provides transfer of (QoS) policy and charging rules from PCRF to Policy and Charging Enforcement Function (PCEF) in the PDN GW.
- S8:- Inter-PLMN reference point providing user and control plane between the Serving GW in the VPLMN and the PDN GW in the HPLMN. S8 is the inter PLMN variant of S5.
- S9:- It provides transfer of (QoS) policy and charging control information between the Home PCRF and the Visited PCRF in order to support local breakout function.
- S10:- Reference point between MMEs for MME relocation and MME to MME information transfer.
- S11:- Reference point between MME and Serving GW.
- S12:- Reference point between UTRAN and Serving GW for user plane tunnelling when Direct Tunnel is established. It is based on the Iu-u/Gn-u reference point using the GTP-U protocol as defined between SGSN and UTRAN or respectively between SGSN and GGSN. Usage of S12 is an operator configuration option.
- S13:- It enables UE identity check procedure between MME and EIR.
- SGi:- It is the reference point between the PDN GW and the packet data network. Packet data network may be an operator external public or private packet data network or an intra operator packet data network, e.g. for provision of IMS services. This reference point corresponds to Gi for 3GPP accesses.
- Rx:- The Rx reference point resides between the AF and the PCRF in the TS 23.203.
- SBc:- Reference point between CBC and MME for warning message delivery and control functions.
103
參考答案
Chase Combining retransmits the same coded data, and the receiver combines them for better decoding.
104
參考答案
Four protocols are managed by this layer: ICMP, IGMP, IP, and ARP.
105
參考答案
The LTE protocol stack includes PHY, MAC, RLC, PDCP, RRC, and NAS layers.
106
參考答案
I placed point-of-sale devices in an isolated VLAN with ACLs blocking internet except payment gateways, meeting PCI compliance. That business alignment is key for strong network engineer interview questions responses.
107
參考答案
A VPC is a logically isolated section of a public cloud where you can launch resources in a virtual network you define. It's important because it provides network isolation, security, and control over network configuration. This allows organizations to create a private and secure environment. They can achieve this within a public cloud infrastructure.
108
參考答案
The transition from earlier generations to 5G RAN entails significant advancements. Notably, 5G delivers substantially higher data rates, offering faster downloads and reduced latency for an enhanced user experience.
The ultra-low latency of 5G is pivotal for applications requiring real-time responsiveness, such as autonomous vehicles. Additionally, 5G RAN accommodates a greater number of connected devices per unit area, addressing the escalating demand for the Internet of Things (IoT) and facilitating a more interconnected environment.
The introduction of network slicing is a distinctive feature, allowing the creation of virtual networks tailored to specific applications and ensuring efficient resource allocation. Moreover, the incorporation of advanced antenna technologies like massive MIMO enhances spectral efficiency.
109
參考答案
Signal detection uses reference signals for channel estimation and coherent detection.
110
參考答案
The 10 refers to the data transfer rate, which in this case is 10 Mbps. The term 'Base' refers to baseband, as opposed to broadband.
111
參考答案
Paging based on location info uses tracking areas to limit paging to relevant cells.
112
參考答案
Top candidates will know that high availability requires implementing redundancy and failover mechanisms. For this, they'd need to: Use multiple, redundant links and devices to eliminate single points of failure; Implement technologies like load balancing and clustering to distribute traffic evenly and handle failures; Make regular backups and have disaster recovery plans to restore services quickly.
113
參考答案
A QoS flow is the finest granularity of QoS differentiation in 5G, identified by a QoS Flow ID (QFI).
114
參考答案
Multiple RACH formats support different cell sizes and environments.
RNTI (Radio Network Temporary Identifier) is a temporary identifier used to differentiate UEs and specific functions, such as C-RNTI for scheduling and RA-RNTI for random access.
117
參考答案
SIB2 provides PRACH configuration, preamble parameters, and power control settings.
118
參考答案
It reduces delay and avoids collision, ensuring faster handover.
119
參考答案
5G supports bandwidths up to 100 MHz in FR1 and up to 400 MHz in FR2. MCS (Modulation and Coding Scheme) ranges from 0 to 28 for data channels. MAS likely refers to MIMO layers (up to 16 layers). FR1 bands include n1, n2, n3, n5, n7, n8, n12, n20, n25, n28, n41, n66, n71, n77, n78, n79, etc. FR2 bands include n257, n258, n260, n261 as per 3GPP Rel 15/16.
120
參考答案
Troubleshooting network issues is a key skill necessary for maintaining a robust 5G network. This question will help evaluate this aspect.
121
參考答案
PHR is reported per activated component carrier using extended PHR.
122
參考答案
Network densification refers to the deployment of a higher number of base stations, such as small cells and distributed antenna systems, to increase network capacity and improve coverage in 5G.
123
參考答案
MIMO uses multiple antennas to improve data rates, reliability, and spectral efficiency through spatial multiplexing and diversity.
124
參考答案
The MIB provides critical parameters for the UE to decode further system information.
125
參考答案
Downlink carrier aggregation increases bandwidth and data rates.
126
參考答案
Advanced interference management techniques, such as interference cancellation, dynamic scheduling, and advanced receiver algorithms, are employed in the air interface to mitigate interference and improve spectral efficiency.
127
參考答案
KRRCint provides integrity protection for RRC messages.
128
參考答案
The fifth generation of wireless technology, or 5G network, offers 4G LTE networks a competitive speed advantage, lower latency, and increased capacity. It may greatly affect how we live, work, and have fun.
With 5G wireless technology, more users will have access to higher peak data speeds of several gigabits per second (Gbps), extremely low latency, improved reliability, huge network capacity, and a more consistent user experience.
Speed: Compared to the median speeds of 4G LTE, 5G can deliver high speeds up to 10 times quicker.
129
參考答案
The network may queue or prioritize paging requests to manage overload.
130
參考答案
Encryption is the process of encoding information into a code that is unintelligible to unauthorized users. This data is then decoded or decrypted back to its normal, readable format using a secret key or password. Encryption ensures that data intercepted in transit remains unreadable, as the user must have the correct password or key to decrypt it.
131
參考答案
Common cell bandwidth options in 5G networks include 5 MHz, 10 MHz, 20 MHz, 40 MHz, 80 MHz, and 100 MHz. The choice of cell bandwidth depends on factors such as available spectrum, network requirements, and deployment scenarios.
132
參考答案
Paging allows UEs to sleep most of the time, waking only for paging occasions, saving power.
133
參考答案
Inter-frequency handover moves the UE to a different frequency for load balancing or coverage.
134
參考答案
Rate matching adjusts the code rate to fit the available resources for HARQ transmissions.
135
參考答案
DRX on-duration keeps the UE awake to monitor PDCCH for scheduling.
136
參考答案
In 5G, the S-GW is replaced by the UPF (User Plane Function), which handles packet routing and forwarding.
137
參考答案
RAR includes timing advance, uplink grant, and TC-RNTI.
138
參考答案
ACK confirms successful reception, while NACK triggers retransmission.
加入Telegram學習組 ▷