لا تريد أن تفوت شيئا؟

نصائح اجتياز امتحان الشهادة

آخر أخبار الامتحانات ومعلومات الخصم

برعاية وحديثة من قبل خبرائنا

نعم، أرسل لي النشرة الإخبارية

خذ اختبارات أخرى عبر الإنترنت
السؤال #1
A security administrator needs to configure a firewall rule based on the domain name of a specific application. Which field in a distributed firewall rule does the administrator configure?
A. Policy
B. Profile
C. Service
D. Source
عرض الإجابة
اجابة صحيحة: B
السؤال #2
Which three security features are dependent on the NSX Application Platform? (Choose three.)
A. NSX Intelligence
B. NSX Firewall
C. NSX Network Detection and Response
D. NSX TLS Inspection
E. NSX Distributed IDS/IPS
F. NSX Malware Prevention
عرض الإجابة
اجابة صحيحة: ACE
السؤال #3
What are two supported VPN configuration types in a NSX-T Data Center? (Choose two.)
A. OpenVPN
B. MPLS
C. L3VPN
D. L2VPN
E. SSLVPN+
عرض الإجابة
اجابة صحيحة: DE
السؤال #4
Which two commands are used to query the arp-table of a logical switch? (Choose two.)
A. get logical-switch arp-table
B. get logical-switch arp-table
C. get logical-switch arp-table
D. get logical-switch arp-table
E. get logical-switch arp-table
عرض الإجابة
اجابة صحيحة: AB
السؤال #5
An administrator wants to validate the BGP connection status between the Tier-0 Gateway and the upstream physical router. What sequence of commands could be used to check this status on NSX Edge node?
A. - enable - get vrf - show bgp neighbor
B. - get gateways- vrf - get bgp neighbor
C. - set vrf - show logical-routers- show bgp
D. - show logical-routers- get vrf- show ip route bgp
عرض الإجابة
اجابة صحيحة: A
السؤال #6
An NSX administrator has configured a KVM hypervisor as a transport node. Which kernel module on KVM implements a N-VDS?
A. openvswitch
B. etherswitch
C. nsx-vswitch
D. dvswitch
عرض الإجابة
اجابة صحيحة: A
السؤال #7
Which two BGP configuration parameters can be configured in the VRF Lite gateways? (Choose two.)
A. Route Aggregation
B. Route Distribution
C. Graceful Restart
D. BGP Neighbors
E. Local AS
عرض الإجابة
اجابة صحيحة: AD
السؤال #8
Which two choices are solutions offered by the VMware NSX portfolio? (Choose two.)
A. VMware Aria Automation
B. VMware NSX Distributed IDS/IPS
C. VMware NSX Advanced Load Balancer
D. VMware Tanzu Kubernetes Grid
E. VMware Tanzu Kubernetes Cluster
عرض الإجابة
اجابة صحيحة: BC
السؤال #9
An NSX administrator has deployed a single NSX Manager node and will be adding two additional nodes to form a 3-node NSX Management Cluster for a production environment. The administrator will deploy these two additional nodes and Cluster VIP using the NSX UI. What two are the prerequisites for this configuration? (Choose two.)
A. The cluster configuration must be completed using API
B. All nodes must be in the same subnet
C. All nodes must be in separate subnets
D. A compute manager must be configured
E. NSX Manager must reside on a Windows Server
عرض الإجابة
اجابة صحيحة: BD
السؤال #10
Which three steps are required to create an IPsec VPN tunnel? (Choose three.)
A. Create an IPsec service
B. Add a local endpoint
C. Configure an IPsec session
D. Configure a distributed firewall policy
E. Add a logical switch
عرض الإجابة
اجابة صحيحة: ABC
السؤال #11
Which CLI command is used to start the NSX Manager virtual machine in the KVM environment?
A. virsh start
B. virsh poweron
C. virsh poweron
D. virsh start
عرض الإجابة
اجابة صحيحة: A
السؤال #12
When a stateful service is enabled for the first time on a Tier-0 Gateway, what happens on the NSX Edge node?
A. SR and DR doesn't need to be connected to provide any stateful services
B. SR is instantiated and automatically connected with DR
C. SR and DR is instantiated but requires manual connection
D. DR is instantiated and automatically connected with SR
عرض الإجابة
اجابة صحيحة: B
السؤال #13
Which two choices are prerequisites to configure NSX-T on VDS? (Choose two.)
A. MTU 1500
B. MTU 1400
C. vSphere Distributed Switch 6
D. vSphere Distributed Switch 7
E. MTU 1600
عرض الإجابة
اجابة صحيحة: DE
السؤال #14
An NSX administrator is configuring the KVM hypervisor host as a transport node and wants to apply the Failover Order as a NIC teaming policy. Which profile allows the administrator to configure the NIC Teaming policy as Failover Order?
A. N-VDS/VDS Profile
B. Transport Node Profile
C. Host Switch Profile
D. Uplink Profile
عرض الإجابة
اجابة صحيحة: D
السؤال #15
Which three security features are dependent on the NSX Application Platform? (Choose three.)
A. NSX Intelligence
B. NSX Firewall
C. NSX Network Detection and Response
D. NSX TLS Inspection
E. NSX Distributed IDS/IPS
F. NSX Malware Prevention
عرض الإجابة
اجابة صحيحة: ACF
السؤال #16
Which two commands does an NSX administrator use to check the IP address of the VMkernel port for the Geneve protocol on the ESXi transport node? (Choose two.)
A. net-dvs
B. esxcfg-nics -l
C. esxcli network ip interface ipv4 get
D. esxcfg-vmknic -l
E. esxcli network nic list
عرض الإجابة
اجابة صحيحة: C
السؤال #17
What are the supported N-VDS modes?
A. DPDK Datapath
B. Enhanced Datapath
C. Overlay Datapath
D. Standard Datapath
E. Secure Datapath
عرض الإجابة
اجابة صحيحة: BD
السؤال #18
An NSX administrator noticed that the nsxcli command times out after 600 secs of idle time. Which CLI command disables the nsxcli time out value on NSX Manager?
A. set cli-timeout 0
B. set cli-timeout enabled
C. set cli-timeout disabled
D. set cli-timeout 1
عرض الإجابة
اجابة صحيحة: A
السؤال #19
Which two choices are prerequisites to configure NSX-T on VDS? (Choose two.)
A. MTU 1500
B. MTU 1400
C. vSphere Distributed Switch 6
D. vSphere Distributed Switch 7
E. MTU 1600
عرض الإجابة
اجابة صحيحة: DE
السؤال #20
Which three selections are capabilities of Network Topology? (Choose three.)
A. Display how the different NSX components are interconnected
B. Display the VMs connected to Segments
C. Display how the Physical components are interconnected
D. Display the uplinks configured on the Tier-1 Gateways
E. Display the uplinks configured on the Tier-0 Gateways
عرض الإجابة
اجابة صحيحة: ABE
السؤال #21
An NSX administrator is troubleshooting a connectivity issue with virtual machines running on an ESXi transport node. Which feature in the NSX UI shows the mapping between the virtual NIC and the host's physical adapter?
A. Port Mirroring
B. IPFIX
C. Activity Monitoring
D. Switch Visualization
عرض الإجابة
اجابة صحيحة: D
السؤال #22
Which of the following exist only on Tier-1 Gateway firewall configurations and not on Tier-0?
A. Applied To
B. Actions
C. Sources
D. Profiles
عرض الإجابة
اجابة صحيحة: A
السؤال #23
An administrator has deployed 10 Edge Transport Nodes in their NSX Environment, but has forgotten to specify an NTP server during the deployment. What is the efficient way to add an NTP server to all 10 Edge Transport Nodes?
A. Use a Node Profile
B. Use the CLI on each Edge Node
C. Use Transport Node Profile
D. Use a PowerCLI script
عرض الإجابة
اجابة صحيحة: A
السؤال #24
What needs to be configured on a Tier-0 Gateway to make NSX Edge Services available to a VM on a VLAN-backed logical switch?
A. Loopback Router Port
B. VLAN Uplink
C. Service interface
D. Downlink interface
عرض الإجابة
اجابة صحيحة: C
السؤال #25
What are three functions of a Tier-0 Gateway in a multi-tenant service provider environment? (Choose three.)
A. acts as a default gateway for the tenant workloads
B. enables east-west connectivity to the tenant workloads
C. interconnects the Tier-1 gateways of multiple tenants
D. provides isolation between the tenants
E. provides first-hop routing for the tenant workloads
F. enables north-south connectivity to the tenant workloads
عرض الإجابة
اجابة صحيحة: CDF
السؤال #26
Which three selections are capabilities of Network Topology? (Choose three.)
A. Display how the different NSX components are interconnected
B. Display the VMs connected to Segments
C. Display how the Physical components are interconnected
D. Display the uplinks configured on the Tier-1 Gateways
E. Display the uplinks configured on the Tier-0 Gateways
عرض الإجابة
اجابة صحيحة: ABC
السؤال #27
A user is assigned these two roles in NSX Manager: ? LB Admin ? Network Engineer What privileges does this user have in the system?
A. read permissions on all networking services and full access permissions on load balancing features
B. full access permissions on all networking services and full access permissions on load balancing features
C. full access permissions on all networking services and read permissions on load balancing features
D. read permissions on all networking services and read permissions on load balancing features
عرض الإجابة
اجابة صحيحة: B
السؤال #28
When a stateful service is enabled for the first time on a Tier-0 Gateway, what happens on the NSX Edge node?
A. SR and DR doesn't need to be connected to provide any stateful services
B. SR is instantiated and automatically connected with DR
C. SR and DR is instantiated but requires manual connection
D. DR is instantiated and automatically connected with SR
عرض الإجابة
اجابة صحيحة: B
السؤال #29
What is the VMware recommended way to deploy a virtual NSX Edge Node?
A. Through the NSX UI
B. Through automated or interactive mode using an ISO
C. Through the vSphere Web Client
D. Through the OVF command line tool
عرض الإجابة
اجابة صحيحة: A
السؤال #30
What are two supported N-VDS modes? (Choose two.)
A. DPDK Datapath
B. Overlay Datapath
C. Secure Datapath
D. Enhanced Datapath
E. Standard Datapath
عرض الإجابة
اجابة صحيحة: DE

View The Updated Vmware Exam Questions

SPOTO Provides 100% Real Vmware Exam Questions for You to Pass Your Vmware Exam!

Get Vmware Practice Test

عرض الإجابات بعد التقديم

يرجى إرسال البريد الإلكتروني الخاص بك والواتس اب للحصول على إجابات الأسئلة.

ملحوظة: يرجى التأكد من صلاحية معرف البريد الإلكتروني وWhatsApp حتى تتمكن من الحصول على نتائج الاختبار الصحيحة.

بريد إلكتروني:
رقم الواتس اب/الهاتف:


Copyright © 2024. Designer by SPOTO Official Website. All Rights Reserved.