لا تريد أن تفوت شيئا؟

نصائح اجتياز امتحان الشهادة

آخر أخبار الامتحانات ومعلومات الخصم

برعاية وحديثة من قبل خبرائنا

نعم، أرسل لي النشرة الإخبارية

خذ اختبارات أخرى عبر الإنترنت
السؤال #1
The administrator has been tasked with applying asynchronous software updates to the VMware Cloud Foundation (VCF) instance using the VMware Async Patch CLI Tool. Which four steps would an administrator take to complete the task? (Choose four.)
A. Download the bundles from SDDC Manager
B. Download the bundles
C. Upload the confirmation to SDDC Manager
D. Apply the patches directly through the Async Patch CLI Tool
E. Enable the bundles
F. Apply the patches through the SDDC Manager UI
G. Upload the bundles to SDDC Manager
عرض الإجابة
اجابة صحيحة: BDEG
السؤال #2
What is a symptom of an issue with vSphere HA?
A. Snapshots cannot be created or consolidated
B. VMs are not restarted after a host failure
C. VMs are not being migrated using vMotion
D. Hosts frequently disconnect from vCenter Server
عرض الإجابة
اجابة صحيحة: B
السؤال #3
Sequence the steps in VMware Cloud Foundation for performing a workload domain deployment using SDDC Manager. 1. Configure storage and networking 2. Prepare ESXi hosts for deployment 3. Deploy VMware Cloud Foundation 4. Validate prerequisites for workload domain deployment 5. Configure the VMware Cloud Foundation management domain
A. 1, 2, 3, 4, 5
B. 3, 1, 4, 2, 5
C. 5, 3, 2, 4, 1
D. 3, 2, 1, 4, 5
عرض الإجابة
اجابة صحيحة: B
السؤال #4
In VMware Cloud Foundation, which component is responsible for scaling and managing the deployment of NSX Edge clusters?
A. SDDC Manager
B. NSX Manager
C. vCenter Server
D. Aria Operations
عرض الإجابة
اجابة صحيحة: A
السؤال #5
When deploying VMware Aria Suite Lifecycle in a VMware Cloud Foundation environment, what is the primary role of SDDC Manager during deployment?
A. Provisioning and managing vSphere clusters
B. Integrating VMware Cloud Foundation with public cloud resources
C. Managing and configuring VMware Aria Suite components
D. Scaling the VMware Aria suite across multiple clouds
عرض الإجابة
اجابة صحيحة: C
السؤال #6
Which two configurations must be considered when scaling an NSX Edge Cluster in VMware Cloud Foundation?
A. Ensure that the vCenter Server is set to HA mode
B. Verify the BGP configuration for route propagation
C. Add or remove edge transport nodes
D. Ensure that storage policies are properly assigned
عرض الإجابة
اجابة صحيحة: BC
السؤال #7
Which two steps should an administrator perform to configure the backup of the VMware Cloud Foundation (VCF) SDDC Manager and NSX components to allow them to be recovered in the event of a full site failure? (Choose two.)
A. Backup the NSX Manager configuration by exporting it to an archive file
B. Configure the backup settings in SDDC Manager
C. Configure image-based backup for the NSX Manager cluster
D. Prepare an external SFTP server to store file-based backups
E. Define a scheduled task in vCenter to create a snapshot of the NSX Edge cluster
عرض الإجابة
اجابة صحيحة: BD
السؤال #8
How do virtual machine (VM) storage policies in a VMware vSphere environment contribute to optimizing resource utilization, ensuring data availability, and meeting application-specific requirements?
A. By guaranteeing storage IOPs for a particular virtual machine
B. By regulating and optimizing storage traffic between virtual machines
C. By streamlining the process of automating virtual machine backups
D. B y defining and enforcing storage requirements, such as performance, availability, and redundancy
عرض الإجابة
اجابة صحيحة: D
السؤال #9
An administrator is tasked with enabling Workload Management (vSphere IaaS control plane) on a VMware Cloud Foundation workload domain. Which three of the following are prerequisites for enabling Workload Management? (Choose three.)
A. Ensure that the cluster has at least three ESXi hosts
B. Configure NTP and DNS settings for all management components
C. Install the vSphere Client on all ESXi hosts
D. Verify that all ESXi hosts are running vSphere 7
E. Ensure that the vSphere Distributed Switch is configured with sufficient port groups
عرض الإجابة
اجابة صحيحة: ABD
السؤال #10
During the deployment of a workload domain using SDDC Manager, which of the following is the primary consideration for storage configuration?
A. vSAN storage policy
B. Storage vMotion setup
C. Network connectivity configuration
D. Public cloud storage allocation
عرض الإجابة
اجابة صحيحة: A
السؤال #11
What are the two prerequisites when configuring vSphere IaaS Control Plane in VMware Cloud Foundation? (Choose two)
A. Establish network connectivity between the management and workload domains
B. Ensure all ESXi hosts are running the latest version of VMware Cloud Foundation
C. Ensure vSAN is configured for storage management
D. Install NSX Edge for networking components
عرض الإجابة
اجابة صحيحة: AB
السؤال #12
Which prerequisite task must be completed before deploying VMware Cloud Foundation (VCF) using VMware Cloud Builder?
A. Ensure that all ESXi hosts are connected to a single vCenter Server
B. Verify network configurations and DNS settings for all components
C. Verify configurations on Virtual Distributed Switch on the ESXi hosts that will be used for the deployment
D. Ensure HCX is configured for workload migration
عرض الإجابة
اجابة صحيحة: B
السؤال #13
An administrator is using VMware Aria Automation to automate the provisioning of virtual machines in their VMware Cloud Foundation (VCF) environment. They notice that the deployment requests are failing frequently. What step should the administrator take in VMware Aria Operations for Logs to diagnose the cause of the failures?
A. Check the Audit Logs to see if there are any unauthorized access attempts
B. Review the Alert Definitions to ensure alerts for request failures are configured and enabled
C. Access the Dashboard page to get an overview of system health and performance metrics
D. Use the Interactive Analytics feature to search for error messages related to the requests
عرض الإجابة
اجابة صحيحة: D
السؤال #14
An administrator needs to ensure that network traffic is protected from interception and tampering during VM migration activities. What feature or setting should the administrator enable to achieve this?
A. Encrypted vSphere vMotion
B. vSphere Virtual Machine Encryption
C. vSphere DRS
D. vSphere HA
عرض الإجابة
اجابة صحيحة: A
السؤال #15
In a VMware Cloud Foundation environment, which of the following components can be managed through SDDC Manager? (Choose two)
A. VMware Aria Suite components
B. NSX Edge clusters
C. vCenter Server settings
D. vSAN storage policies
عرض الإجابة
اجابة صحيحة: AB
السؤال #16
Which of the following are necessary to scale a VMware Cloud Foundation deployment? (Choose two)
A. Upgrade VMware Aria Suite
B. Add a new ESXi host
C. Add a new workload domain
D. Add a host to the existing cluster
عرض الإجابة
اجابة صحيحة: CD
السؤال #17
An administrator has been tasked with deploying a new VMware Cloud Foundation (VCF) environment and is preparing the physical hosts that will be used for the management domain. The administrator has completed the following tasks for all of the physical hosts: The required version of ESXi has been installed. Networking has been configured for the ESXi management interface. DNS entries have been created for forward and reverse name resolution. NTP has been configured and the time synchronized with a centraliz
A. Upload the Cloud Builder appliance OVA file to the new shared NFS datastore
B. Create a new vSphere Standard Switch for the VCF ESXi management network on each ESXi host
C. Configure a new shared NFS datastore on each ESXi host
D. Replace the SSL certificate with either a CA signed or self-signed certificate on each ESXi host
E. Configure VLAN 10 on the VM network Port Group of the vSphere Standard Switch on each ESXi host
عرض الإجابة
اجابة صحيحة: DE
السؤال #18
The administrator has been tasked with applying asynchronous software updates to the VMware Cloud Foundation (VCF) instance using the VMware Async Patch CLI Tool. Which four steps would an administrator take to complete the task? (Choose four.)
A. Download the bundles from SDDC Manager
B. Download the bundles
C. Upload the confirmation to SDDC Manager
D. Apply the patches directly through the Async Patch CLI Tool
E. Enable the bundles
F. Apply the patches through the SDDC Manager UI
G. Upload the bundles to SDDC Manager
عرض الإجابة
اجابة صحيحة: BDEG
السؤال #19
What is the primary use case for Aria Operations within the VMware Aria Suite?
A. To manage and analyze log data from various sources
B. To enable network virtualization and security
C. To automate workload deployments across multiple cloud environments
D. To provide comprehensive monitoring, analytics, and performance management of the cloud infrastructure
عرض الإجابة
اجابة صحيحة: D
السؤال #20
While deploying the first VI workload domain in a VMware Cloud Foundation (VCF) solution, which two steps will always be performed by SDDC Manager? (Choose two.)
A. Deploy an NSX Edge cluster and configure BGP routing on the T0 Gateway
B. Deploy a new NSX Manager instance for the VI workload domain
C. Configure vSAN as a principal storage for the VI workload domain
D. Deploy and configure a new vCenter Server instance for the VI workload domain
E. Connect a new vCenter Server instance to the Application Virtual Network
عرض الإجابة
اجابة صحيحة: BD
السؤال #21
What is a symptom of an issue with vSphere HA?
A. Snapshots cannot be created or consolidated
B. VMs are not restarted after a host failure
C. VMs are not being migrated using vMotion
D. Hosts frequently disconnect from vCenter Server
عرض الإجابة
اجابة صحيحة: B
السؤال #22
While deploying the first VI workload domain in a VMware Cloud Foundation (VCF) solution, which two steps will always be performed by SDDC Manager? (Choose two.)
A. Deploy an NSX Edge cluster and configure BGP routing on the T0 Gateway
B. Deploy a new NSX Manager instance for the VI workload domain
C. Configure vSAN as a principal storage for the VI workload domain
D. Deploy and configure a new vCenter Server instance for the VI workload domain
E. Connect a new vCenter Server instance to the Application Virtual Network
عرض الإجابة
اجابة صحيحة: BD
السؤال #23
What is the primary tool used for troubleshooting vSphere IaaS Control Plane (formerly vSphere with Tanzu) issues in VMware Cloud Foundation?
A. vRealize Operations Manager
B. vSphere CLI
C. vSphere Client
D. VMware Tanzu CLI
عرض الإجابة
اجابة صحيحة: D
السؤال #24
Which SDDC Manager component is responsible for upgrading VMware Cloud Foundation?
A. vSphere Lifecycle Manager
B. Maintenance Mode
C. VMware Aria Suite Lifecycle
D. Update Bundles
عرض الإجابة
اجابة صحيحة: D
السؤال #25
Which prerequisite task must be completed before deploying VMware Cloud Foundation (VCF) using VMware Cloud Builder?
A. Ensure that all ESXi hosts are connected to a single vCenter Server
B. Verify network configurations and DNS settings for all components
C. Verify configurations on Virtual Distributed Switch on the ESXi hosts that will be used for the deployment
D. Ensure HCX is configured for workload migration
عرض الإجابة
اجابة صحيحة: B
السؤال #26
An administrator configures a Local Content Library on vCenter Server A, enables publishing, and creates Subscribed Content Libraries on vCenter Server B and vCenter Server C using the publishing URL. However, the contents of the subscribed libraries on vCenter B and C are not synchronizing with the source library on vCenter A. Which step should the administrator take to troubleshoot the issue?
A. Recreate the Subscribed Content Libraries on vCenter B and C with a new publishing URL from vCenter Server A to reset the synchronization configuration
B. Verify that network connectivity exists between vCenter Server A and the other two vCenters, and ensure that the required ports for Content Library synchronization are open
C. Enable bidirectional synchronization on the Content Library settings to ensure updates are propagated back and forth between vCenter Server A and the subscribed libraries
D. Manually export the library content from vCenter Server A and import it into the subscribed libraries on vCenter B and C to initialize synchronization
عرض الإجابة
اجابة صحيحة: B
السؤال #27
What is the primary benefit of using HCX Replication Assisted vMotion (RAV) for VM migration?
A. It requires no configuration changes to the VM(s) within the destination environment
B. It performs a test migration to ensure compatibility
C. It ensures zero downtime to the VM(s)
D. It provides the fastest migration method by powering off the VM(s) before initiating the migration
عرض الإجابة
اجابة صحيحة: C

View The Updated Vmware Exam Questions

SPOTO Provides 100% Real Vmware Exam Questions for You to Pass Your Vmware Exam!

Get Vmware Practice Test

عرض الإجابات بعد التقديم

يرجى إرسال البريد الإلكتروني الخاص بك والواتس اب للحصول على إجابات الأسئلة.

ملحوظة: يرجى التأكد من صلاحية معرف البريد الإلكتروني وWhatsApp حتى تتمكن من الحصول على نتائج الاختبار الصحيحة.

بريد إلكتروني:
رقم الواتس اب/الهاتف:


Copyright © 2024. Designer by SPOTO Official Website. All Rights Reserved.